Schneider Electric ATS01N222LU, EAN: 3389110667288

Schneider Electric ATS01N222LU soft starter 22A

Industrial Material > Automation > Frequency converter, soft starter

Schneider Electric ATS01N222LU soft starter 22A

Lieske Part No. 596828
Mfg Part No ATS01N222LU
EAN-Code 3389110667288
Manufacturer Schneider Electric
Here only 379,05 EUR
451,07 EUR incl. VAT

Further information for Schneider Electric ATS01N222LU soft starter 22A

Complementary
Assembly styleWith heat sink
Function availableIntegrated bypass
Supply voltage limits180…264 V
Supply frequency50...60 Hz - 5...5 %
Network frequency47.5...63 Hz
[Uc] Control circuit voltageBuilt into the starter
Starting time1 s / 100; 5 s / 20; 10 s / 10; Adjustable from 1 to 10 s
Deceleration time symbAdjustable from 1 to 10 s
Starting torque30...80 % of starting torque of motor connected directly on the line supply
Discrete input typeLogic (LI1, LI2, BOOST) stop, run and boost on start-up functions
Discrete input voltage24...40 V
Discrete input logicPositive LI1, LI2, BOOST at State 0: < 5 V and 13 V, >= 0.5 mA
Discrete output current2 A DC-13; 3 A AC-15
Discrete output typeOpen collector logic LO1 end of starting signal; Relay outputs R1A, R1C NO
Discrete output voltage24 V (voltage limits: 6...30 V) open collector logic
Minimum switching current10 mA at 6 V DC for relay outputs
Maximum switching currentRelay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load; Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
Display type1 LED (green) for starter powered up; 1 LED (yellow) for nominal voltage reached
Tightening torque0.5 N.m; 1.9…2.5 N.m
MarkingCE
Operating positionVertical +/- 10 degree
Height154 mm
Width45 mm
Depth131 mm
Net weight0.56 kg
Compatibility codeATS01N2
Power range4…6 kW at 200…240 V 3 phases
Motor starter typeSoft starter
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 60947-4-2
Product certificationsGOST; CSA; C-Tick; UL; CCC
IP degree of protectionIP20
Pollution degree2 conforming to EN/IEC 60947-4-2
Vibration resistance1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation-10…40 °C (without derating); 40…50 °C (with current derating of 2 % per °C)
Ambient air temperature for storage-25…70 °C conforming to EN/IEC 60947-4-2
Operating altitude1000 m with current derating of 2.2 % per additional 100 m
Logistical informations
Country of originDE
Main
Range of productAltistart 01
Product destinationAsynchronous motors
Product or component typeSoft starter
Product specific applicationSimple machine
Device short nameATS01
Network number of phases3 phases
[Us] rated supply voltage200...240 V - 10...10 %
Motor power kW4 kW, 3 phases at 200...240 V; 5.5 kW, 3 phases at 200...240 V
Motor power hp5 hp, 3 phases at 200...240 V; 7.5 hp, 3 phases at 200...240 V
IcL starter rating22 A
Utilisation categoryAC-53B conforming to EN/IEC 60947-4-2
Current consumption110 A at nominal load
Type of startStart with voltage ramp
Power dissipation in W124.5 W in transient state; 4.5 W at full load and at end of starting
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width15.200 cm
Package 1 Length17.500 cm
Package 1 Weight640.000 g
Unit Type of Package 2S03
Number of Units in Package 214
Package 2 Height30 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight9.488 kg
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a power of up to 22A. This Altistart 01 can be used for a motor rated power up to 5.5 kW or 7.5 HP for 3 phases (200 V to 240 V AC). This DIN rail mounted soft starter allows the soft start of simple machines such as conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machines. It is 45 mm wide, which makes it one of the smallest soft starters on the market, it can be installed almost anywhere. It has an integrated bypass that reduces noise and heat dissipation. Easy setup with only 2 settings: can be configured even by non-professionals. It ensures a soft start of your machines, avoids mechanical stress and extends their lifespan.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/596828
qrcode für Schneider Electric ATS01N222LU soft starter 22A