| Complementary |
| Assembly style | With heat sink |
| Function available | Integrated bypass |
| Supply voltage limits | 99…528 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| [Uc] Control circuit voltage | 110 V AC +/- 10 % at 35 mA; 24 V AC/DC +/- 10 % at 30 mA; 240 V AC +/- 10 % at 80 mA |
| Starting time | 1 s / 100; 5 s / 20; Adjustable from 1 to 5 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete output current | 2 A DC-13; 3 A AC-15 |
| Tightening torque | 1.9…2.5 N.m; 0.5 N.m |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 124 mm |
| Width | 45 mm |
| Depth | 131 mm |
| Net weight | 0.28 kg |
| Compatibility code | ATS01N1 |
| Power range | 1.1…2 kW at 200…240 V 1 phase; 2.2…3 kW at 200…240 V 3 phases; 4…6 kW at 380…440 V 3 phases |
| Motor starter type | Soft starter |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | EN/IEC 60947-4-2 |
| Product certifications | C-Tick; CCC; UL; CSA; GOST |
| IP degree of protection | IP20 |
| Pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Ambient air temperature for operation | -10…40 °C (without derating); 40…50 °C (with current derating of 2 % per °C) |
| Ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
| Operating altitude | 1000 m with current derating of 2.2 % per additional 100 m |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range of product | Altistart 01 |
| Product destination | Asynchronous motors |
| Product or component type | Soft starter |
| Product specific application | Simple machine |
| Device short name | ATS01 |
| Network number of phases | 1 phase |
| [Us] rated supply voltage | 110...480 V - 10...10 % |
| Motor power kW | 2.2 kW, 3 phases at 230 V; 5.5 kW, 3 phases at 400 V; 1.5 kW, 1 phase at 230 V |
| Motor power hp | 3 hp, 3 phases at 230 V; 1.5 hp, 3 phases at 210 V; 7.5 hp, 3 phases at 460 V |
| IcL starter rating | 12 A |
| Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| Current consumption | 60 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 1 W at full load and at end of starting; 61 W in transient state |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.200 cm |
| Package 1 Width | 15.500 cm |
| Package 1 Length | 17.500 cm |
| Package 1 Weight | 332.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 14 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 5.198 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 112 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 53.940 kg |
The alternative to the star-delta starter! Compact and inexpensive electronic starting for standard applications. Soft starter for asynchronous motors. Rated current 12 A, 230V power 2.2 kW, 400V power 5.5 kW. The soft starter enables the gentle starting of three-phase asynchronous motors and prevents current peaks in the start-up phase as well as mechanical load surges. Typical applications: conveyor belts, conveyors, pumps, fans, compressors, etc. Extremely simple to commission, integrated bypass, optional signal outputs or control voltage internally or externally, boost function for high breakaway torque.