Schneider Electric APM6A0CTLY6, EAN: 3606489527174

Schneider Electric APM6A0CTLY6 Control Unit ATV600 Y6

Industrial Material > Enclosures / Chassis > System Accessories

Schneider Electric APM6A0CTLY6 Control Unit ATV600 Y6

Lieske Part No. 1866135
Mfg Part No APM6A0CTLY6
EAN-Code 3606489527174
Manufacturer Schneider Electric
Here only 2.350,60 EUR
2.797,21 EUR incl. VAT

Further information for Schneider Electric APM6A0CTLY6 Control Unit ATV600 Y6

Additional features
[UH,nom] Rated operating voltage500 - 690 V
Frequency resolutionDisplay unit: 0.1 Hz; Analog input: 0.012/50 Hz
Connection typeRJ45 (at decentralised graphical terminal) for Ethernet/Modbus TCP; RJ45 (at decentralised graphical terminal) for Modbus, serial
Physical interface2-wire RS 485 for Modbus, serial
Transmission frameRTU for Modbus, serial
Transmission speed10/100 Mbit/s for Ethernet IP/Modbus TCP; 4.8; 9.6; 19.2; 38.4 kBit/s for Modbus, serial
Swap modeHalf-duplex, full-duplex, auto-negotiation Ethernet/Modbus TCP
Data format8 bits, configurable to odd, even, or no parity for Modbus, serial
Polarisation typeNo impedance for Modbus, serial
Number of addresses1…247 for Modbus, serial
Access methodSlave Modbus TCP
SupplyExternal power supply for digital inputs: 24 V DC (19…30 V)
Local signalling3 LEDs for local diagnostics; 3 LEDs (two-colour) for status of integrated communication; 4 LEDs (two-colour) for status communication module
Width230 mm
Height678,3 mm
Depth108 mm
Product weight7,1 kg
Number of analog inputs3
Analogue input typeAI1, AI2, AI3 software-configurable voltage: 0 - 10 V DC, impedance: 30 kOhm, resolution 12 bits; AI1, AI2, AI3 software-configurable current: 0 - 20 mA / 4 - 20 mA, impedance: 250 Ohm, resolution 12 bits
Number of discrete inputs8
Discrete input typeDI1...DI6 programmable, 24 V DC (= 30 V), impedance: 3.5 kOhm; DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (= 30 V); STOA, STOB Safe Torque Off (safely switched off torque), 24 V DC (= 30 V), impedance: > 2.2 kOhm
Input compatibilityDI1...DI6: Discrete input Level 1 PLC corresponds to IEC 61131-2; DI5, DI6: Discrete input Level 1 PLC corresponds to IEC 65A-68; STOA, STOB: Discrete input Level 1 PLC corresponds to IEC 61131-2
Number of analogue outputs2
Analog output typeSoftware-configurable voltage AO1, AO2: 0 - 10 V DC resistance 470 Ohm, resolution 10 bit; Software-configurable current AO1, AO2: 0 - 20 mA, resolution 10 bit
Sampling duration2 ms +/- 0.5 ms (DI1...DI4) - digital input; 5 ms +/- 1 ms (DI5, DI6) - digital input; 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input; 10 ms +/- 1 ms (AO1) - analog output
Accuracy+/- 0.6 % AI1, AI2, AI3 at temperature variation of 60 °C analog input; +/-1 % AO1, AO2 at temperature variation of 60 °C analog output
Linearity errorAI1, AI2, AI3: +/- 0.15 % of maximum value for analog input; AO1, AO2: +/- 0.2 % for analog output
Relay output number3
Relay output typeConfigurable relay logic R1: Fault relay Normally open contact (NO)/Normally closed contact (NC) electrical life 100000 cycles; Configurable relay logic R2: Sequence relay no electrical life 100000 cycles; Configurable relay logic R3: Sequence relay no electrical life 100000 cycles
Update timeRelay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Min. switching currentRelay output R1, R2, R3: 5 mA at 24 V DC
Max. switching currentRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC; Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC; Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC; Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Insulationbetween power and control terminals
Contractual warranty
Warranty (in months)18
Main features
Product seriesAltivar Process Modular
Product or component typeControl module
Device short nameAPM
Degree of protection (IP)IP00 corresponds to IEC 61800-5-1; IP00 corresponds to IEC 60529
Kit compositionControl unit; graphic terminal; Digi-Link cable; 24 V cable; cable for voltage measurement
Supply frequency50 - 60 Hz -5 - 5 %
Safety functionSTO (Safe Torque Off) safely switched-off torque SIL 3
Discrete input logic16 preset speeds
Communications protocolEthernet; Modbus, serial; Modbus TCP
Mounting
Insulation resistance> 1 MOhm 500 V DC for 1 minute to ground
Noise level69 dB corresponds to 86/188/EEC
Power loss in WForced convection: 2390 W, switching frequency 2.5 kHz
Electromagnetic compatibilityElectrostatic discharge immunity test Level 3 according to IEC 61000-4-2; Immunity test against radiated high-frequency electromagnetic fields Level 3 according to IEC 61000-4-3; Electrical fast transient burst immunity test Level 4 according to IEC 61000-4-4; 1.2/50 μs - 8/20 μs surge immunity test Level 3 according to IEC 61000-4-5; Conducted radio-frequency electromagnetic field immunity test Level 3 according to IEC 61000-4-6
Pollution degree2 corresponds to IEC 61800-5-1
Vibration resistance1.5 mm peak to peak (f= 2…13 Hz) complies with IEC 60068-2-6; 0.5 gn (f= 13…200 Hz) complies with IEC 60068-2-6
Shock resistance7 gn for 11 ms corresponds to IEC 60068-2-27
Relative humidity5…95 % condensation not permitted corresponds to IEC 60068-2-3
Operating ambient temperature-10…40 °C (without power derating); 40…50 °C (with power derating factor)
Ambient temperature during storage-40…70 °C
Operating altitude= 1,000 m without power reduction; 1000 - 4800 m with current reduction 1 % per 100 m
Environmental propertiesChemical resistance Class 3C3 according to IEC 60721-3-3; Dust resistance Class 3S3 according to IEC 60721-3-3
StandardsIEC 61800-3; IEC 61800-5-1; IEC 61000-3-12; IEC 60721-3; IEC 61508; IEC 13849-1
Product certificationsTÜV
TextCE
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height18,000 cm
VPE 1 width28,700 cm
VPE 1 length73,500 cm
Packaging weight (Lbs)7,726 kg
VPE 2 typeS06
VPE 2 quantity6
VPE 2 height75,000 cm
VPE 2 width60,000 cm
VPE 2 length80,000 cm
VPE 2 weight48,000 kg
Standard ATV600 control unit, APM, single drive, 500-690V.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1866135
qrcode für Schneider Electric APM6A0CTLY6 Control Unit ATV600 Y6