| Complementary |
| Input voltage limits | 320...575 V AC 3 phases |
| Nominal network frequency | 50…60 Hz |
| Network system compatibility | TN; TT; IT |
| Maximum leakage current | 2 mA 500 V AC |
| Input protection type | Integrated fuse (not interchangeable) 3.15 A; External protection (recommended) |
| Inrush current | 35 A at 380 V; 35 A at 500 V |
| Power factor | 0.90 at 380 V AC; 0.90 at 500 V AC |
| Efficiency | 95 % at 380 V AC; 95 % at 500 V AC |
| Output voltage adjustment | 24...28 V |
| Power dissipation in W | 49 W |
| Current consumption | < 1.9 A 380 V AC; < 1.7 A 500 V AC |
| Turn-on time | < 2 s |
| Holding time | > 20 ms 380 V AC; > 20 ms 500 V AC |
| Startup with capacitive loads | 200000 µF |
| Residual ripple | < 200 mV |
| Meantime between failure [MTBF] | 595400 h at 25 °C, full load conforming to SR 332; 308300 h at 55 °C, 80 % load conforming to SR 332 |
| Output protection type | Against overload and short-circuits, protection technology: manual or automatic reset by switch; Against over temperature, protection technology: automatic reset; Against overvoltage, protection technology: manual reset |
| Line and load regulation | < 0.17 % at 100 % load in line at 25 °C; < 0.6 % +/- 0.5 % at 150 % load at 25 °C |
| Status LED | 1 LED (green and red) product status |
| Depth | 128.7 mm |
| Height | 124 mm |
| Width | 110 mm |
| Net weight | 2.29 kg |
| Output coupling | Parallel |
| Marking | CE; UKCA |
| Mounting support | Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; Double-profile DIN rail |
| Supply | SELV conforming to IEC 60950-1; SELV conforming to IEC 60204-1; SELV conforming to IEC 60364-4-41 |
| Dielectric strength | 4000 V AC with input to output; 2000 V AC with input to ground; 1500 V AC with output to ground; 4000 V AC with input to diagnostic relay; 500 V AC with output to diagnostic relay; 1500 V AC with diagnostic relay to ground; with shutdown input not isolated from output |
| Diagnostic relay | Electromechanical relay 1000.0 mA 30 V |
| Service life | 10 year(s) 40 °C 80 % load |
| Overvoltage category | III; II |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 62368-1; EN/IEC 61204-3; IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4; IEC 61000-3-2; EN 61000-3-3; UL 62368-1; CSA C22.2 No 62368-1; CSA C22.2 No 107.1 |
| Product certifications | CE; CUL listed; CUL recognized; RCM; CB Scheme; EAC; KC; UKCA; CURus |
| Operating altitude | < 5000 m overvoltage category III; overvoltage category II |
| Shock resistance | 150 m/s² for 11 ms |
| IP degree of protection | IP20 |
| Ambient air temperature for operation | -25…55 °C without current derating mounting position A < 2000 m; 55…70 °C with current derating of 3.3 % per °C mounting position A < 2000 m |
| Electrical shock protection class | Class I |
| Pollution degree | 2 |
| Vibration resistance | 3.5 mm (f= 3…11.9 Hz) conforming to IEC 60068-2-6; 20 m/s² (f= 11.9…150 Hz) conforming to IEC 60068-2-6 |
| Electromagnetic emission | Conducted emissions conforming to IEC 61000-6-3; Radiated emissions conforming to IEC 61000-6-4 |
| Logistical informations |
| Country of origin | IN |
| Main |
| Range of product | Modicon Power Supply |
| Product or component type | Power supply |
| Power supply type | Regulated switch mode |
| Variant option | Universal |
| Enclosure material | Metal |
| Nominal input voltage | 380...500 V AC three phase |
| Rated power in W | 960 W |
| Output voltage | 24 V DC |
| Power supply output current | 40 A |
| Permissible temporary current boost | 1.5 x In (for 5 seconds) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 15.500 cm |
| Package 1 Width | 21.500 cm |
| Package 1 Length | 22.000 cm |
| Package 1 Weight | 2.872 kg |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 2 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 6.344 kg |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 48 |
| Package 3 Height | 105.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 120.000 cm |
| Package 3 Weight | 160.250 kg |
Die getakteten Spannungsversorgungen der Baureihe Modicon ABLU Universal eignen sich ideal für die meisten Anwendungen in der Industrie und sind insbesondere konzipiert für Gleichspannungsvorgung in Automatisierungsanwendungen. Die Produktfamilie ABLU besticht durch seine kompakte und robuste Bauweise und umfasst dabei Netzteile mit einer Ausgangsspannung von 24V DC sowie 48V DC. Diese 3-phasige Spannungsversorgung mit einer Nennleistung von 960W verfügt über eine Eingangsspannung von 380-500V AC und eine Ausgangsspannung von 24V DC/40A. Die Ausgangsspannung ist dabei einstellbar. Zudem verfügt dieses Netzteil über eine Überbelastbarkeit durch eine Boost-Funktion. Das Verhalten im Kurzschlussfall ist wahlweise einstellbar zwischem manuellem und automatischem Reset. Hinzukommend verfügt dieses Gerät über ein Diagnoserelais für Unterspannungsmeldung sowie 2 LEDs zur Zustandsmeldung. Die Montage des Metallgehäuses erfolgt per Aufrastung auf einer Hutschiene. Durch einen QR-Code auf der Vorderseite des Netzteils gelangt man schnell und direkt zu Dokumentationen. Aufgrund der Vielzahl von vorhandenen Produktstandards und Zertifizierungen geeignet für den internationalen Einsatz. Dank des Green Premium Umweltzeichens können Sie detaillierte Informationen zu Materialinhalten, Umweltauswirkungen und Kreislaufwirtschaft erhalten, die Ihre Nachhaltigkeitsziele unterstützen.