Complementary
Input voltage limits	90...264 V AC
Nominal network frequency	50…60 Hz
Network system compatibility	TN; TT; IT
Maximum leakage current	0.25 mA 240 V AC
Input protection type	Integrated fuse (not interchangeable) 3.15 A; External protection (recommended) 20 A Curve B; External protection (recommended) 20 A Curve C; External protection (recommended) 4 A Curve B; External protection (recommended) 4 A Curve C
Inrush current	25 A at 115 V; 50 A at 230 V
Power factor	0.48 at 115 V AC; 0.38 at 230 V AC
Efficiency	87 % at 115 V AC; 87 % at 230 V AC
Output voltage adjustment	24...28 V
Power dissipation in W	5 W
Current consumption	< 0.8 A 115 V AC; < 0.6 A 230 V AC
Turn-on time	< 2 s
Holding time	> 20 ms 115 V AC; > 60 ms 230 V AC
Startup with capacitive loads	3000 µF
Residual ripple	< 100 mV
Meantime between failure [MTBF]	2500000 h at 25 °C, full load; 1000000 h at 55 °C, 80 % load
Output protection type	Against overload and short-circuits, protection technology: automatic reset; Against over temperature, protection technology: manual reset; Against overvoltage, protection technology: manual reset
Connections - terminals	Screw connection: 0.5...1.5 mm², (20 AWG...16 AWG) without wire end ferrule for input/output; Screw connection: 0.5...1 mm², (20 AWG...18 AWG) with wire end ferrule for input/output
Line and load regulation	< 0.5 % at in line; < 1 % at 0 to 100 % load
Status LED	1 LED (green) output voltage
Depth	55.6 mm
Height	91 mm
Width	36 mm
Net weight	0.170 kg
Output coupling	Serial; Parallel
Mounting support	Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; Double-profile DIN rail; panel mounting
Supply	SELV conforming to IEC 60950-1; SELV conforming to IEC 60204-1; SELV conforming to IEC 60364-4-41
Dielectric strength	3000 V AC input/output
Service life	10 year(s)
Overvoltage category	II
Contractual warranty
Warranty (in months)	18
Environment
Standards	IEC 62368-1; EN/IEC 61010-1; EN 61010-2-201; EN/IEC 61204-3; IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4; IEC 61000-3-2; EN 61000-3-3; UL 62368-1; UL 61010-1; UL 61010-2-201; CSA C22.2 No 62368-1; CSA C22.2 No 61010-1; CSA C22.2 No 61010-2-201
Product certifications	CE; CUL listed; CUL recognized; RCM; CB Scheme; EAC; KC; NEC: class 2
Operating altitude	< 2000 m overvoltage category III; 2000 m...5000 m overvoltage category II
Shock resistance	150 m/s² for 11 ms
IP degree of protection	IP20
Ambient air temperature for operation	-25…55 °C without current derating mounting position A < 2000 m; 55…70 °C with current derating of 2.67 % per °C mounting position A < 2000 m
Electrical shock protection class	Class II without PE connection
Pollution degree	2
Vibration resistance	3 mm (f= 2…9 Hz) conforming to IEC 60721-3-3; 10 m/s² (f= 9…200 Hz) conforming to IEC 60721-3-3
Electromagnetic emission	Conducted emissions conforming to IEC 61000-6-3; Radiated emissions conforming to IEC 61000-6-4
Logistical informations
Country of origin	TH
Main
Range of product	Modicon Power Supply
Product or component type	Power supply
Power supply type	Regulated switch mode
Variant option	Modular
Enclosure material	Plastic
Nominal input voltage	100...240 V AC single phase; 100...240 V AC phase to phase
Rated power in W	30 W
Output voltage	24 V DC
Power supply output current	1.25 A
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.000 cm
Package 1 Width	6.000 cm
Package 1 Length	11.000 cm
Package 1 Weight	172.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	29
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	5.317 kg
Unit Type of Package 3	P12
Number of Units in Package 3	464
Package 3 Height	45.000 cm
Package 3 Width	80.000 cm
Package 3 Length	120.000 cm
Package 3 Weight	97.312 kg

The power supply ABLM1A24012 from Schneider Electric belongs to the Modicon power supply series and is designed as a modular, switched-mode power source for industrial, commercial, and residential applications. It provides a constant output voltage of 24 V DC with a current of 1.25 A, corresponding to a rated power of 30 W. The input voltage is 100–240 V AC at a frequency of 50–60 Hz, with input voltage limits of 90–264 V AC allowing high tolerance to voltage fluctuations. The device is suitable for use in network systems of types TN, TT, and IT and meets the requirements for SELV (safety extra-low voltage) according to IEC 60950-1, IEC 60204-1, and IEC 60364-4-41, ensuring safe power supply for electronic components.

Applications
This power supply is designed for use in enclosures and control systems in industrial and building environments where a reliable and compact power supply is required for controls, sensors, communication modules, or other electronic components. The compact design with dimensions 36 mm (width) × 91 mm (height) × 55.6 mm (depth) enables efficient space utilization. Mounting is possible either on a Top Hat rail (type TH35-15 or TH35-7.5) according to IEC 60715, on a double-profile DIN rail, or via enclosure installation. Input connections are located at the bottom, output connections at the top of the device.

Functions and Features in Detail
The device includes an integrated, non-replaceable fuse rated at 3.15 A. For additional protection, the use of external circuit breakers is recommended, for example, with 4 A or 20 A and curve B or C. Output protection functions include overload and short-circuit protection with automatic reset, as well as over-temperature and over-voltage protection with manual reset. The output voltage is adjustable in the range of 24–28 V, enabling adaptation to specific load requirements. A green LED serves as a status indicator for the output voltage.

Technology Explained Simply
The power supply operates in regulated switching mode, enabling high efficiency and low power loss of 5 W. The efficiency is 87 % at 115 V AC and 230 V AC. Ripple voltage is less than 100 mV, ensuring clean and stable voltage for sensitive electronic loads. Line and load regulation is designed for < 0.5 % with devices connected in series and < 1 % with load variations from 0 to 100 %, guaranteeing high stability of the output voltage. The turn-on time is less than 2 seconds, and the hold-up time is > 20 ms at 115 V AC and > 60 ms at 230 V AC. The device can start loads with a capacitance of up to 3000 µF, ensuring compatibility with capacitive loads such as filters or capacitors.

Compatibility and Accessories
The power supply can be operated in series or parallel configuration, enabling power expansion or redundancy in critical applications. It is compatible with various circuit breakers, for example, models M9F22104 (4 A, C-characteristic) or M9F22120 (20 A, C-characteristic) from Schneider Electric. Other models in the ABLM series, such as ABLM1A24004 or ABLM1A24006, offer alternative output powers and are suitable for modular system expansion.

Mounting and Installation
Mounting is done by clipping onto a top hat rail (TH35-15 or TH35-7.5) or by screw mounting onto a mounting plate. Connections are made via screw terminals designed for cross-sections of 0.5–1.5 mm² (without wire end ferrules) or 0.5–1 mm² (with wire end ferrules). The protection rating IP20 protects against finger contact and solid foreign objects, but not against splashing water or dust. The operating temperature range is from -25 °C to 55 °C without current derating; above 55 °C, current derating occurs at 2.67 % per degree Celsius. The operating altitude is up to 2000 m, with overvoltage category II applying from 2000–5000 m. The device is designed for a service life of 10 years, with an MTBF (mean time between failures) of 2,500,000 hours at 25 °C and full load.

Operational Advantages
The high efficiency, low power loss, and robust construction ensure reliable and low-maintenance power supply. Integrated protection functions increase operational safety, and the modular design enables flexible system expansion. Certifications according to IEC 62368-1, EN/IEC 61010-1, UL 62368-1, and other standards ensure suitability for international markets. Product documentation is accessible via a QR code on the device, simplifying maintenance and fault diagnosis. The Green Premium environmental label provides information on material contents, environmental impacts, and circular economy, supporting sustainability goals.