Complementary
Input voltage limits	90...264 V AC
Nominal network frequency	50…60 Hz
Network system compatibility	TN; TT; IT
Maximum leakage current	0.25 mA 240 V AC
Input protection type	Integrated fuse (not interchangeable) 3.15 A; External protection (recommended) 20 A Curve B; External protection (recommended) 20 A Curve C; External protection (recommended) 4 A Curve B; External protection (recommended) 4 A Curve C
Inrush current	25 A at 115 V; 50 A at 230 V
Power factor	0.48 at 115 V AC; 0.38 at 230 V AC
Efficiency	85 % at 115 V AC; 85 % at 230 V AC
Output voltage adjustment	12...15 V
Power dissipation in W	4.6 W
Current consumption	< 0.8 A 115 V AC; < 0.6 A 230 V AC
Turn-on time	< 2 s
Holding time	> 20 ms 115 V AC; > 60 ms 230 V AC
Startup with capacitive loads	3000 µF
Residual ripple	< 100 mV
Meantime between failure [MTBF]	2500000 h at 25 °C, full load; 1000000 h at 55 °C, 80 % load
Output protection type	Against overload and short-circuits, protection technology: automatic reset; Against over temperature, protection technology: manual reset; Against overvoltage, protection technology: manual reset
Connections - terminals	Screw connection: 0.5...1.5 mm², (20 AWG...16 AWG) without wire end ferrule for input/output; Screw connection: 0.5...1 mm², (20 AWG...18 AWG) with wire end ferrule for input/output
Line and load regulation	< 0.5 % at in line; < 1 % at 0 to 100 % load
Status LED	1 LED (green) output voltage
Depth	55.6 mm
Height	91 mm
Width	36 mm
Net weight	0.170 kg
Output coupling	Serial
Mounting support	Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; Double-profile DIN rail; panel mounting
Supply	SELV conforming to IEC 60950-1; SELV conforming to IEC 60204-1; SELV conforming to IEC 60364-4-41
Dielectric strength	3000 V AC input/output
Service life	10 year(s)
Overvoltage category	II
Contractual warranty
Warranty (in months)	18
Environment
Standards	IEC 62368-1; EN/IEC 61010-1; EN 61010-2-201; EN/IEC 61204-3; IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4; IEC 61000-3-2; EN 61000-3-3; UL 62368-1; UL 61010-1; UL 61010-2-201; CSA C22.2 No 62368-1; CSA C22.2 No 61010-1; CSA C22.2 No 61010-2-201
Product certifications	CE; CUL listed; CUL recognized; RCM; CB Scheme; EAC; KC; NEC: class 2
Operating altitude	< 2000 m overvoltage category III; 2000 m...5000 m overvoltage category II
Shock resistance	150 m/s² for 11 ms
IP degree of protection	IP20
Ambient air temperature for operation	-25…55 °C without current derating mounting position A < 2000 m; 55…70 °C with current derating of 2.67 % per °C mounting position A < 2000 m
Electrical shock protection class	Class II without PE connection
Pollution degree	2
Vibration resistance	3 mm (f= 2…9 Hz) conforming to IEC 60721-3-3; 10 m/s² (f= 9…200 Hz) conforming to IEC 60721-3-3
Electromagnetic emission	Conducted emissions conforming to IEC 61000-6-3; Radiated emissions conforming to IEC 61000-6-4
Logistical informations
Country of origin	TH
Main
Range of product	Modicon Power Supply
Product or component type	Power supply
Power supply type	Regulated switch mode
Variant option	Modular
Enclosure material	Plastic
Nominal input voltage	100...240 V AC single phase; 100...240 V AC phase to phase
Rated power in W	25 W
Output voltage	12 V DC
Power supply output current	2.1 A
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	4.500 cm
Package 1 Width	6.200 cm
Package 1 Length	11.000 cm
Package 1 Weight	176.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	29
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	5.704 kg

The Modicon ABLM Modular series of switch mode power supplies are ideal for most industrial, commercial and residential applications. The ABLM product family impresses with its compact design and includes power supplies with output voltages of 5V DC, 12V DC or 24V DC. This 1-phase power supply with a nominal output of 25W has an input voltage of 120-240V AC and an output voltage of 12V DC/2.1A. The input is located at the bottom of the device and the outputs at the top. The plastic housing can be mounted either by snapping it onto a top hat rail or screwing it onto a mounting plate. A QR code on the device provides access to further documentation. Suitable for international use due to the large number of existing product standards and certifications. Thanks to the Green Premium environmental label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.