Schneider Electric ABL8RPS24050, EAN: 3389119405614

Schneider Electric ABL8RPS24050 Transformer 24VDC 5A

Light Systems > Electrical Equipment > Transformer, NV electronically

Schneider Electric ABL8RPS24050 Transformer 24VDC 5A

Lieske Part No. 463157
Mfg Part No ABL8RPS24050
EAN-Code 3389119405614
Manufacturer Schneider Electric
Here only 212,80 EUR
253,23 EUR incl. VAT

Further information for Schneider Electric ABL8RPS24050 Transformer 24VDC 5A

Complementary
Input voltage limits85...132 V AC; 170...550 V AC
Inrush current30 A
Power factor0.51 at 240 V AC; 0.59 at 120 V AC
Efficiency87 %
Output voltage adjustment24...28.8 V adjustable
Power dissipation in W15.5 W
Provided equipmentPower factor correction filter conforming to IEC 61000-3-2
Output protection typeAgainst overload, protection technology: manual or automatic reset; Against overvoltage, protection technology: 30...32 V, manual reset; Against short-circuits, protection technology: manual or automatic reset; Against undervoltage, protection technology: tripping if U < 21.6 V; Thermal, protection technology: automatic reset
Connections - terminalsRemovable screw terminal block: 2 x 2.5 mm², for diagnostic relay; Screw type terminals: 3 x 0.5...3 x 4 mm², (22 AWG...12 AWG) for input connection; Screw type terminals: 1 x 0.5...1 x 4 mm², (22 AWG...12 AWG) for input ground connection; Screw type terminals: 4 x 0.5...4 x 4 mm², (22 AWG...12 AWG) for output connection; Screw type terminals: 1 x 0.5...1 x 4 mm², (22 AWG...12 AWG) for output ground connection
Status LED1 LED (green and red) output voltage; 1 LED (green, red and orange) output current
Depth125 mm
Height143 mm
Width56 mm
Net weight0.7 kg
Output couplingParallel; Series
MarkingCE
Mounting support35 x 15 mm symmetrical DIN rail; 35 x 7.5 mm symmetrical DIN rail
Operating positionVertical
SupplySELV conforming to IEC 60950-1; SELV conforming to IEC 60204-1; SELV conforming to IEC 60364-4-41
Dielectric strength3500 V with between input and ground; 4000 V with between input and output; 500 V with between output and ground
Contractual warranty
Warranty (in months)18
Environment
StandardsCSA C22.2 No 60950-1; UL 508; EN/IEC 62368-1
Product certificationsCCSAus; EAC; KC; RCM; UL
Environmental characteristicEMC conforming to IEC 61000-6-1; EMC conforming to IEC 61000-6-3; EMC conforming to EN 55024; EMC conforming to IEC 61000-6-4; EMC conforming to EN/IEC 61204-3; Safety conforming to IEC 60950-1; Safety conforming to EN/IEC 61204-3
Operating altitude2000 m
IP degree of protectionIP20 conforming to IEC 60529
Ambient air temperature for operation50…60 °C with derating factor mounting position A < 2000 m; -25…50 °C without derating mounting position A < 2000 m
Logistical informations
Country of originPH
Main
Range of productModicon Power Supply
Product or component typePower supply
Power supply typeRegulated switch mode
Nominal input voltage100...120 V AC single phase, terminal(s): N-L1; 200...500 V AC phase to phase, terminal(s): L1-L2
Rated power in W120 W
Output voltage24 V DC
Power supply output current5 A
Permissible temporary current boost1.5 x In (for 4 s)
Anti-harmonic filterLow frequency harmonic currents
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.800 cm
Package 1 Width14.500 cm
Package 1 Length16.500 cm
Package 1 Weight906.000 g
Unit Type of Package 2S06
Number of Units in Package 2105
Package 2 Height75.000 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight109.600 kg
The power supply of the Modicon ABL8 series by Schneider Electric, type ABL8RPS24050, is a switched-mode power supply for industrial automation applications. It provides an output voltage of 24 V DC with a rated current of 5 A and a rated power of 120 W. The power supply is designed for use with single-phase (100–120 V AC) and two-phase (200–500 V AC) AC power networks, covering input voltage ranges of 85–132 V AC and 170–550 V AC. The output voltage is adjustable in the range of 24 to 28.8 V DC, enabling flexible adaptation to different load requirements. The power supply operates in regulated switching mode and achieves an efficiency of 87 %, ensuring efficient energy conversion. The power loss is 15.5 W. During short-term load peaks, the power supply can deliver a temporary current boost of 1.5 times the rated current (for 4 seconds), referred to as the boost function.

Applications include powering control devices, PLC systems, sensors, and other electronic components in industrial automation. The robust design and mounting on a symmetrical DIN rail (35 x 15 mm or 35 x 7.5 mm) enable easy integration into enclosures. The operating position is vertical, and the maximum operating altitude is 2,000 m. The ambient temperature during operation ranges from -25 °C to 50 °C without power derating; above 50 °C, power derating occurs. The protection rating IP20 according to IEC 60529 protects against finger contact and solid foreign objects, but is not suitable for outdoor use or humid environments.

Functions and equipment in detail include multiple protection features: overload protection with manual or automatic reset, overvoltage protection (30–32 V, manual reset), short-circuit protection (manual or automatic reset), undervoltage protection (trips below 21.6 V), and thermal protection with automatic reset. A diagnostic relay enables reporting of undervoltage conditions. Status indication is provided by two LEDs: one LED indicates the output voltage status (green/red), the other indicates the output current status (green/red/orange). Connections are made via screw terminals with cross-sections of 0.5 to 4 mm² (AWG 22–AWG 12) for input, output, and grounding. A removable screw terminal strip (2 x 2.5 mm²) is provided for the diagnostic relay. The output coupling allows parallel or series connection of multiple units.

Technology explained simply: The power supply operates in switching mode, increasing energy efficiency and reducing heat generation. The input side is equipped with a power factor correction filter that improves the power factor and reduces network load. The power factor is 0.51 at 240 V AC and 0.59 at 120 V AC. The dielectric strength is 3500 V between input and ground, 4000 V between input and output, and 500 V between output and ground, ensuring high electrical insulation. The supply meets SELV requirements according to IEC 60950-1, IEC 60204-1, and IEC 60364-4-41, enabling safe, low-energy supply for control systems.

Compatibility and accessories include various modules for extending functionality. These include the buffer module ABL8BUF24400 (24–28.8 V DC, 40 A) for voltage supply, the redundancy module ABL8RED24400 (40 A) for switched-mode power supply, the protection module ABL8PRP24100 (28–28.8 V DC, 10 A), and the DC/DC converter ABL8DCC05060 (30 W, 24–28 V). These modules can be used to increase reliability, distribute loads, or stabilize voltage. Additionally, power switches such as GB2CD07 or GB2CD08, and motor protection switches such as GV2RT06 or GV2ME06, are available to protect the power supply in control circuits.

Mounting and installation are performed by clipping onto a DIN rail. The metal housing is equipped with a release lever ensuring secure fastening. Dimensions are 56 mm (width) × 143 mm (height) × 125 mm (depth), and the product weight is 0.7 kg. Mounting is simple and requires no special tools. The power supply is designed for industrial environments and complies with international standards such as EN/IEC 62368-1, CSA C22.2 No. 60950-1, and UL 508. EMC requirements according to IEC 61000-6-1, IEC 61000-6-3, EN 55024, and IEC 61000-6-4 are met, as are safety requirements according to IEC 60950-1 and EN/IEC 61204-3. Certifications include CCSAus, EAC, KC, RCM, and UL, enabling use in various markets.

Operational advantages include high reliability, easy mounting, flexible output voltage adjustment, and integrated protection functions. The status indicators enable quick diagnosis of operating conditions. High efficiency and low power loss reduce cooling requirements and operating costs. Compatibility with various accessory modules expands application possibilities in complex automation systems. The device is designed for use in industrial control systems and provides stable and safe power supply for critical applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/463157
qrcode für Schneider Electric ABL8RPS24050 Transformer 24VDC 5A