Complementary
Input voltage limits	85...132 V AC; 170...264 V AC
Inrush current	30 A
Power factor	0.68 at 240 V AC; 0.69 at 120 V AC
Efficiency	88 %
Output voltage adjustment	24...28.8 V adjustable
Power dissipation in W	57.6 W
Provided equipment	Power factor correction filter conforming to IEC 61000-3-2
Output protection type	Against overload, protection technology: manual or automatic reset; Against overvoltage, protection technology: 30...32 V, manual reset; Against short-circuits, protection technology: manual or automatic reset; Against undervoltage, protection technology: tripping if U < 21.6 V; Thermal, protection technology: automatic reset
Connections - terminals	Removable screw terminal block: 2 x 2.5 mm², for diagnostic relay; Screw type terminals: 3 x 0.5...3 x 4 mm², (22 AWG...12 AWG) for input connection; Screw type terminals: 1 x 0.5...1 x 4 mm², (22 AWG...12 AWG) for input ground connection; Screw type terminals: 4 x 0.5...4 x 4 mm², (22 AWG...12 AWG) for output connection
Status LED	1 LED (green and red) output voltage; 1 LED (green, red and orange) output current
Depth	145 mm
Height	125 mm
Width	146 mm
Net weight	1.6 kg
Output coupling	Series; Parallel
Marking	CE
Mounting support	35 x 7.5 mm symmetrical DIN rail; 35 x 15 mm symmetrical DIN rail
Operating position	Vertical
Supply	SELV conforming to IEC 60950-1; SELV conforming to IEC 60204-1; SELV conforming to IEC 60364-4-41
Dielectric strength	2500 V with between input and ground; 3000 V with between input and output; 500 V with between output and ground
Contractual warranty
Warranty (in months)	18
Environment
Standards	CSA C22.2 No 60950-1; UL 508; EN/IEC 62368-1
Product certifications	CCSAus; EAC; KC; RCM; UL
Environmental characteristic	EMC conforming to IEC 61000-6-1; EMC conforming to IEC 61000-6-3; EMC conforming to EN 55024; EMC conforming to IEC 61000-6-4; EMC conforming to EN/IEC 61204-3; Safety conforming to IEC 60950-1; Safety conforming to EN/IEC 61204-3
Operating altitude	2000 m
IP degree of protection	IP20 conforming to IEC 60529; IP10
Ambient air temperature for operation	50…60 °C with derating factor mounting position A < 2000 m; -25…50 °C without derating mounting position A < 2000 m
Logistical informations
Country of origin	PH
Main
Range of product	Modicon Power Supply
Product or component type	Power supply
Power supply type	Regulated switch mode
Nominal input voltage	100...120 V AC single phase, terminal(s): N-L1; 200...240 V AC phase to phase, terminal(s): L1-L2
Rated power in W	480 W
Output voltage	24 V DC
Power supply output current	20 A
Permissible temporary current boost	1.5 x In (for 4 s)
Anti-harmonic filter	Low frequency harmonic currents
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	20.000 cm
Package 1 Width	18.500 cm
Package 1 Length	19.500 cm
Package 1 Weight	2.811 kg
Unit Type of Package 2	P06
Number of Units in Package 2	36
Package 2 Height	75.000 cm
Package 2 Width	60.000 cm
Package 2 Length	80.000 cm
Package 2 Weight	114.956 kg

The Modicon ABL8 Universal series of switch mode power supplies are ideal for most industrial applications and are designed in particular for DC voltage supply in automation applications. The ABL8 product family impresses with its compact and robust design and includes power supplies with an output voltage of 24V DC. This 1-/2-phase power supply with a nominal output of 480W has an input voltage of 100-240V AC and an output voltage of 24V DC/20A. The output voltage can be adjusted from 24-28.8V DC. In addition, this power supply has an overload capacity of an additional 50% power thanks to a boost function. The behavior in the event of a short circuit can be set between manual and automatic reset. In addition, this device has a diagnostic relay for undervoltage reporting and 2 LEDs for status reporting. The metal housing is mounted by snapping it onto a top hat rail and has a release lever. Suitable for international use due to the large number of existing product standards and certifications. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.