Complementary
Input voltage limits	22...30 V
Input current	20 A
Number of output channels	1
Output protection type	Against overload, protection technology: external protection by power supply; Against short-circuits, protection technology: external protection by power supply
Connections - terminals	For output connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² 20 AWG...8 AWG; For input connection: screw type terminals, connection capacity: 4 x 0.5...4 x 10 mm² 20 AWG...8 AWG; For diagnostic relay: removable screw terminal block, connection capacity: 1 x 2.5 mm² 14 AWG
Fixing mode	By clips on 35 mm symmetrical DIN rail, operating position: horizontal; By clips on 35 mm symmetrical DIN rail, operating position: vertical
Output coupling	Parallel
Operating altitude	2000 m
Marking	CE
Name of test	Electrostatic discharges conforming to IEC 61000-4-2; Emission conforming to IEC 61000-6-3; Induced electromagnetic field conforming to IEC 61000-4-6 level 3; Radiated electromagnetic field conforming to IEC 61000-4-3 level 3; Rapid transient conforming to IEC 61000-4-4 level 3; Surge conforming to IEC 61000-4-5 level 2; Conducted/radiated emissions conforming to EN 55022 class B; Emission conforming to EN 50081-1
Local signalling	1 LED per input (green) for power supply status; 1 relay for power supply status
Net weight	0.7 kg
Contractual warranty
Warranty (in months)	18
Environment
Product certifications	EAC; RCM
Standards	CSA C22.2 No 60950-1; UL 508
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…85 °C
Environmental characteristic	EMC conforming to IEC 61000-6-3; EMC conforming to IEC 61000-6-2; Safety conforming to IEC 60950-1; Safety conforming to EN/IEC 61204
IP degree of protection	IP20 conforming to IEC 60529
Dielectric strength	500 V between input and ground; 500 V between output and ground
Overvoltage category	Class II conforming to VDE 0106-1
Relative humidity	0…90 % during operation; 0…95 % during storage
MTBF reliability	2488391 H at 24 V DC with UTE C80-810 calculation method
Vibration resistance	2 gn (f= 11.9…150 Hz) conforming to IEC 61131-2; 3.5 mm (f= 3…11.9 Hz) conforming to IEC 61131-2
Logistical informations
Country of origin	PH
Main
Range of product	Phaseo
Product or component type	Redundancy module
Input voltage	24...28.8 V DC
Output voltage	(Uin-0.2) V DC
Maximum output current	40 A
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.000 cm
Package 1 Width	16.800 cm
Package 1 Length	16.600 cm
Package 1 Weight	630.000 g
Unit Type of Package 2	S06
Number of Units in Package 2	80
Package 2 Height	75.000 cm
Package 2 Width	60.000 cm
Package 2 Length	80.000 cm
Package 2 Weight	65.160 kg

The Modicon ABL8 Universal series of switch mode power supplies are ideal for most industrial applications and are designed in particular for DC voltage supply in automation applications. The ABL8 product family impresses with its compact and robust design and includes power supplies with an output voltage of 24V DC. This functional module for the Modicon ABL8 power supplies increases the supply reliability of applications. It enables the interconnection of 2 power supplies with 24V DC to one supply circuit for automation applications. If the network of one power supply fails, the other power supply is switched over directly without interruption. The reliability of the DC voltage supply for the supply circuit is made possible by this redundancy module. The internal circuit used reduces the power loss and thus increases the service life of the components, which is very important for reliability. Suitable for international use due to the large number of existing product standards and certifications. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.