Complementary
supply voltage type	DC
Product compatibility	ABR7S11
Contacts type and composition	1 NO
Status LED	1 LED power ON; 1 LED per channel channel status
Polarity distribution	Common distribution group of 4
Short-circuit protection	1 A internal fuse, 5 x 20 mm, fast blow (PLC end)
Mounting mode	By clips (35 mm DIN rail); By screws (surface mount with kit)
Maximum supply current	1 A
Voltage drop on power supply fuse	0.3 V
Maximum current per output common	5 A screw type terminals
[Ui] rated insulation voltage	2000 V between terminals/mounting rails; 300 V between coil circuit/contact circuits conforming to IEC 60947-1
Maximum current per module	12 A
[Uimp] rated impulse withstand voltage	2.5 kV
Installation category	II conforming to IEC 60664-1
Tightening torque	0.6 N.m with flat Ø 3.5 mm screwdriver
Net weight	0.6 kg
Contractual warranty
Warranty (in months)	18
Environment
Product certifications	CSA; UL; DNV; GL; EAC
IP degree of protection	IP2X conforming to IEC 60529
Resistance to incandescent wire	750 °C, extinction time
Shock resistance	15 gn for 11 ms conforming to IEC 60068-2-27
Vibration resistance	2 gn conforming to IEC 60068-2-6 (f = 10…150 Hz)
Resistance to electrostatic discharge	4 kV (contact) level 3 conforming to IEC 61000-4-2; 8 kV (air) level 3 conforming to IEC 61000-4-2
Resistance to radiated fields	10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients	2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation	-5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage	-40…80 °C conforming to IEC 61131-2
Pollution degree	2 conforming to IEC 60664-1
Logistical informations
Country of origin	LV
Main
Range of product	Modicon ABE7
Product or component type	Sub-base with plug-in electromechanical relay
Sub-base type	Output sub-base
[Us] rated supply voltage	19...30 V conforming to IEC 61131-2
Number of channels	16
Connections - terminals	Screw type terminals, 1 x 0.14...1 x 1.5 mm² (26 AWG...16 AWG) flexible with cable end; Screw type terminals, 1 x 0.14...1 x 2.5 mm² (26 AWG...14 AWG) flexible without cable end; Screw type terminals, 1 x 0.14...1 x 4 mm² (26 AWG...12 AWG) solid; Screw type terminals, 2 x 0.14...2 x 0.75 mm² (26 AWG...18 AWG) flexible with cable end; Screw type terminals, 2 x 0.14...2 x 1.5 mm² (26 AWG...16 AWG) solid
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7 cm
Package 1 Width	8.2 cm
Package 1 Length	13.7 cm
Package 1 Weight	312 g
Unit Type of Package 2	S03
Number of Units in Package 2	24
Package 2 Height	30 cm
Package 2 Width	30 cm
Package 2 Length	40 cm
Package 2 Weight	7.902 kg

This product is part of the Modicon ABE7 range, a range of connection bases for the Telefast pre-wired system. The connection plate with plug-in electromechanical relay offers 16 channels. It has a normally open contact. This product allows the quick connection of I/O modules. It is a relay subassembly with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is equipped with screw terminals for electrical connection. It is an IP2x protection product. It weighs 0.6 kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This connection plate is suitable for use with the ABR7S11 plug-in relay. Fixing is done with clips (35mm DIN rail) and screws (surface mounting with kit). Modicon ABE7 simplifies wiring in automation systems. Pre-wired system that allows the connection and adaptation of the control signals of the PLC cards equipped with HE10 connectors.