Further information for Schneider Electric A9Z51216 RCD 2P 16A
Additional features
Device position in system
Outlet; group input
Network frequency
50 Hz
[Ue] Rated operational voltage
230 V AC 50 Hz
Earth fault trip technology
Voltage-independent
Rated breaking force and rated power
Idm 1500 A; IM 1500 A
Conditional rated short-circuit current
10 kA
[Ui] Rated insulation voltage
250 V
[Uimp] Rated impulse voltage withstand
6 kV
Control type
Toggle switch
Local signalling
Trip indicator; ON/OFF indicator
Mounting mode
Plug-in
Mounting bracket
35 mm DIN rail
9-mm pitch
8
Height
88 mm
Width
72 mm
Depth
73 mm
Product weight
350 g
Colour
White (RAL 9003)
Mechanical life
20000 cycles
Electrical lifetime
15000 cycles
Description of locking options
Padlock
Connections - terminals
Double terminal front side 1…35 mm² solid; Double terminal front side 1…25 mm² fine-stranded; Double terminal front side 1…25 mm² fine-stranded with ferrule; Double terminal rear side 1…25 mm² solid; Double terminal rear side 1…16 mm² fine-stranded; Double terminal rear side 1…16 mm² fine-stranded with ferrule
Wire stripping length
14 mm for top or bottom connection
[M] tightening torque
3.5 Nm top or bottom
Contact position indicator
Contractual warranty
Warranty (in months)
18
Main features
Product series
Acti9
Product name
Acti9 iID
Product or component type
Residual current circuit breaker (RCCB)
Device short name
iID
Device application
Electric vehicle charger
Pole description
2P
Neutral position
Left
[In] Rated current
16 A
Type of network
AC
Earth fault sensitivity
30 mA
Earth fault protection time delay
Instantaneous
Earth fault protection class
Type B-EV (electric vehicle)
Conformity marking
VDE; NF; IMQ; KEMA
Mounting
Standards
EN/IEC 61008-1; EN/IEC 61008-2-1; IEC/EN 62423
Product certifications
CCC
Degree of protection (IP)
IP20 corresponds to IEC 60529; IP40 (modular housing) corresponds to IEC 60529
Degree of protection (IK)
IK05
Pollution degree
3
Over voltage category
IV
Electromagnetic compatibility
8/20 µs impulse resistance, 3 kA corresponds to EN/IEC 61008-1
Operating altitude
0 - 2.000 m
Operating ambient temperature
-25…60 °C
Ambient temperature during storage
-40…85 °C
Packaging units
VPE 1 type
PCE
Number of devices per package
1
VPE 1 height
8,500 cm
VPE 1 width
7,500 cm
VPE 1 length
10,000 cm
Packaging weight (Lbs)
363,000 g
VPE 2 type
S03
VPE 2 quantity
27
VPE 2 height
30,000 cm
VPE 2 width
30,000 cm
VPE 2 length
40,000 cm
VPE 2 weight
10,301 kg
Residual current circuit breaker, all-current sensitive, for electric charging station Acti 9 iID. 2-pole, nominal current 16A, type B-EV, nominal residual current 30mA, operating voltage (Ue) 230 AC, 50Hz, insulation voltage 250V AC. Snap action for low-wear switching of the contacts. With mechanical front-side fault signal indicator (VisiTrip) to indicate tripping due to residual current. Safe contact indicator (VisiSafe) of the residual current circuit breaker, green indicator ensures that there is no voltage on the output side. Test button for regular function testing. Double connection terminals for connecting cables or phase rails on both sides. Easy removal of the individual device when the phase rail is installed, thanks to the fastening element accessible from the front. Additional auxiliary modules that can be connected in series (optional) undervoltage release (iMN), overvoltage release (iMSU), shunt release (iMX), auxiliary switch for status reporting (iOF), fault reporting switch (iSD). Protection of charging stations for electric vehicles. Color RAL 9003. Meets the following standards IEC/EN 61008-2-1, IEC/EN 62423, IEC 61543, VDE 0664.