Schneider Electric A9Z25240, EAN: 3606480443046

Schneider Electric A9Z25240 residual current circuit breaker 2-pole 40A

Installation > Modular devices / equipment installation > RCD

Schneider Electric A9Z25240 residual current circuit breaker 2-pole 40A

Lieske Part No. 939538
Mfg Part No A9Z25240
EAN-Code 3606480443046
Manufacturer Schneider Electric
Here only 284,05 EUR
338,02 EUR incl. VAT

Further information for Schneider Electric A9Z25240 residual current circuit breaker 2-pole 40A

Additional features
Network frequency50/60 Hz
[Ue] Rated operational voltage230 - 240 V AC 50/60 Hz
Earth fault trip technologyVoltage-independent
Rated breaking force and rated powerIdm 1500 A; IM 1500 A
Conditional rated short-circuit current10 kA
[Ui] Rated insulation voltage500 V AC 50/60 Hz
[Uimp] Rated impulse voltage withstand6 kV
Control typeToggle switch
Mounting modePlug-in
Mounting bracket35 mm DIN rail
9-mm pitch4
Height91 mm
Width36 mm
Depth73 mm
Product weight210 g
ColourWhite (RAL 9003)
Mechanical life20000 cycles
Electrical lifetime15000 cycles
Description of locking optionsPadlock
Connections - terminalsDouble terminal front side 1…35 mm² solid; Double terminal front side 1…25 mm² fine-stranded; Double terminal front side 1…25 mm² fine-stranded with ferrule; Double terminal rear side 1…25 mm² solid; Double terminal rear side 1…16 mm² fine-stranded; Double terminal rear side 1…16 mm² fine-stranded with ferrule
Wire stripping length14 mm for top or bottom connection
[M] tightening torque3.5 Nm top or bottom
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iID
Product or component typeResidual current circuit breaker (RCCB)
Device short nameiID
Pole description2P
Neutral positionLeft
[In] Rated current40 A
Type of networkAC
Earth fault sensitivity300 mA
Earth fault protection time delaySelective
Earth fault protection classType A
Mounting
StandardsEN/IEC 61008-1; EN/IEC 61008-2-1
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 (modular housing) corresponds to IEC 60529
Pollution degree3
Electromagnetic compatibility8/20 µs impulse resistance, 3,000 A corresponds to EN/IEC 61008-1
Operating ambient temperature-25…60 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height8,300 cm
VPE 1 width4,000 cm
VPE 1 length10,000 cm
Packaging weight (Lbs)217,000 g
VPE 2 typeBB1
VPE 2 quantity6
VPE 2 height9,000 cm
VPE 2 width10,800 cm
VPE 2 length25,500 cm
VPE 2 weight1,362 kg
VPE 3 typeS03
VPE 3 quantity54
VPE 3 height30,000 cm
VPE 3 width30,000 cm
VPE 3 length40,000 cm
VPE 3 weight12,745 kg
Residual current circuit breaker Acti 9 iID, 1.5kA (IEC/EN 61008-1). 2-pole, nominal current 40A, earth fault sensitivity 300mA, earth fault protection class type A, selective, operating voltage (Ue) 230V AC, insulation voltage (Ui) 500V AC. Guarantees additional protection in the event of direct contact (= 30mA). Fault protection in the event of indirect contact, e.g. in the event of insulation faults (= 100mA, = 300mA). Fault protection in construction power distribution boards (500mA). Switching and disconnecting circuits. Snap action for low-wear switching of the contacts. With mechanical front-side fault indication display (VisiTrip) to indicate tripping due to overload or short circuit. Safe contact display (VisiSafe) of the residual current circuit breaker, with a green display to ensure that there is no voltage on the output side. Test button for regular function testing. Double connection terminals for connecting cables or phase rails on both sides. Easy removal of the individual device with the phase rail installed, thanks to the fastening element accessible from the front. Selective version - to ensure correct differentiation between the different residual current circuit breakers and the tripping of the device closest to the defect. Additional auxiliary modules that can be added in series (optional) - undervoltage release (iMN), overvoltage release (iMSU), shunt release (iMX), auxiliary switch for status reporting (iOF), fault reporting switch (iSD). Tool-free installation on the left side of the device. Color RAL 9003. The residual current circuit breaker iID meets the following standards - IEC/EN 61008-1 and IEC/EN 60947-2. This series is also VDE certified!
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/939538
qrcode für Schneider Electric A9Z25240 residual current circuit breaker 2-pole 40A