| Complementary |
| Number of ways | 4 ways 3 L |
| Distribution type | L1 L2 L3 |
| Poles configuration for 1 way | 1 x 3P |
| Connection pitch | 18 mm |
| Connector type | Tooth |
| Distance between way | 54 mm |
| Marking | L1 L2 L3 |
| Insulation | Insulated |
| Device presentation | Cuttable |
| [Ie] rated operational current | 100 A at 40 °C |
| [Ue] rated operational voltage | 415 V AC |
| [Ui] rated insulation voltage | 500 V AC conforming to IEC 61439-2 |
| Mounting location | Top or bottom on tunnel type terminals; Top or bottom on double terminal |
| 9 mm pitches | 24 |
| Width | 220 mm |
| Colour | White (RAL 9003) |
| Range compatibility | Acti9 iC60; Acti9 iK60; Acti9 iID; Acti9 iID K; Acti9 iSW; Acti9 iSW-NA; Multi9 C60; Acti9 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Fire resistance | 960 °C ( 30 s ) conforming to IEC 60695-2-1 |
| Pollution degree | 3 conforming to IEC 60947-7-1 |
| IP degree of protection | IP20 with end-pieces and tooth covers |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range | Acti9 |
| Product or component type | Comb busbar |
| Mounting mode | Horizontal |
| Accessory / separate part category | Connection accessory |
| Lines description | 3L |
| Length in 18 mm modules | 12 |
| Standards | EN/IEC 61439-1 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3 cm |
| Package 1 Width | 1.6 cm |
| Package 1 Length | 21.2 cm |
| Package 1 Weight | 108 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 5 |
| Package 2 Height | 6 cm |
| Package 2 Width | 8.6 cm |
| Package 2 Length | 24.8 cm |
| Package 2 Weight | 607 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 80 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 10.19 kg |
The product A9XPH312 from Schneider Electric is a
phase bar strip from the
Acti9 series, designed for use in electrical distributions and enclosures. It serves as
connection accessory for safe and structured distribution of phase conductors (L1, L2, L3) in 3-pole installations. The bar is
cuttable, enabling flexible adaptation to different enclosure sizes and mounting conditions. With a length of 12 modules (18 mm module grid) and a width of 220 mm, it provides sufficient space for mounting multiple switches and fuses. The
rated operational voltage is 415 V AC, the
rated insulation voltage (Ui) is 500 V AC, complying with standard IEC 61439-2. The
rated operational current (Ie) is 100 A at an ambient temperature of 40 °C, making the bar suitable for medium to high loads in industrial and commercial installations.
Applications include installation in distribution enclosures where clear and safe phase distribution is required. The bar is typically mounted
horizontally and can be fixed
at the top or bottom on tunnel terminals or double terminals. The
pole configuration is 4-pole (3 L), with the three phase conductors (L1, L2, L3) each running through a separate pole. The
labelling of the poles is standardised as L1, L2, L3, facilitating assignment in the circuit diagram and during installation. The
insulation of the bar is ensured, enhancing safety during handling and operation.
Functions and equipment in detail include a
tongue as connection type, enabling a secure and mechanically stable connection to the conductors. The
distance between poles is 54 mm, meeting requirements for electrical insulation and mounting accuracy. The bar is finished in
white (RAL 9003), enabling visual harmonisation with other components of the Acti9 series. The
protection rating (IP) is IP20 when end caps and tongue covers are installed, providing protection against finger contact and solid foreign objects up to 12.5 mm. The
flame resistance is 960 °C (30 seconds), according to IEC 60695-2-1, supporting use in environments with increased fire protection requirements. The
pollution degree is 3, according to IEC 60947-7-1, indicating suitability for use in environments with increased pollution risk.
Technology explained simply shows that the phase bar strip functions as a central distribution component, directing electrical energy from the main supply to individual loads or switches. The cuttable design allows custom adaptation to the specific enclosure geometry. The use of tongues as connection type ensures a firm and corrosion-resistant connection. Compliance with standards (EN/IEC 61439-1, IEC 60947-7-1, IEC 61439-2) ensures reliability and safety in operation. The bar is designed for use in
distributors with 3 phase conductors, with pole labelling simplifying assignment in the circuit diagram.
Compatibility and accessories include use with various products from the Acti9 series, such as switch ranges
Acti9 iC60, iK60, iID, iID K, iSW, iSW-NA as well as
Multi 9 C60. The bar is specifically designed for mounting on tunnel and double terminals, enabling universal use in various enclosure configurations. Suitable accessories include, among others,
switch disconnectors,
FI/LS switches, and
shock protection covers, enhancing safety and functionality of the installation. The
shock protection cover A9XPT920 can be mounted additionally to ensure IP20 protection rating.
Mounting and installation are typically performed horizontally, with the bar fixed at designated mounting points (tunnel or double terminals). The cuttable construction allows precise adaptation to enclosure width. The tongues enable easy and secure connection of conductors. Pole labelling (L1, L2, L3) supports correct assignment in the circuit diagram. Mounting does not require special tools, but proper securing and connection of conductors are necessary to ensure electrical safety.
Operational advantages include high reliability, easy mounting, and flexibility due to the cuttable design. The bar is designed for high load (100 A) and provides safe distribution of phase conductors. Compliance with standards and flame resistance enhance safety in application. Compatibility with a wide range of switches from the Acti9 series facilitates integration into existing systems. Clear pole labelling and insulation reduce the risk of incorrect connections and increase operational safety.