Complementary
Application specific I/O	Pulse totalising counter; Pulse converter
Protection type	Against reverse polarity for auxiliary supply; Against reverse polarity for input; Overvoltage at 33 V DC for digital output
Immunity to microbreaks	10 ms
Reset	Factory reset on front face; By booted push-button; By address encoder; By plug in, plug out the power supply
Input/output type	2 inputs + 1 output per digital channel
Input type	Current sink for digital input, 24 V DC +/- 20 % at 2.5 mA
Maximum permanent current	5 mA for digital input
Electronic filtering time	2 ms for digital input from state 0 to state 1
Output type	Logic current source: 24 V - DC - 100 mA
Inrush current	0.5 A for digital output; 7 A for power supply
Local signalling	Communication: 1 LED (yellow); Status: 1 LED (green, orange and red)
Type of setting	Modbus address 01...99 for address encoders; Reset for address encoders; Reset for plug in, plug out the auxiliary supply
Mounting position	Horizontal and vertical on DIN rail
Colour	White (RAL 9003)
Location of connection	Front
Connections - terminals	Spring-loaded terminal Ti24 qty: 11 for digital input/output, ordered separately; Plug-in connector qty: 1 for supply circuit; Plug-in connector qty: 1 for communication bus
Wire stripping length	Control: 10 mm; Supply circuit: 7 mm; Communication bus: 7 mm
Communication network type	RS485 Modbus RTU client/server SUB-D 9 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
9 mm pitches	0 useful
Height	22.5 mm
Width	359 mm
Depth	42 mm
Net weight	188 g
Provided equipment	Set of 1 bus connector; Set of 1 power supply connector; Set of 2 locking clips
Range compatibility	Acti 9 iTL auxiliary; Linergy Linergy FM; Acti 9 iOF+SD 24; Acti 9 iACT24; Acti 9 iATL24; PowerLogic pulse output meter; Acti 9 RCA iC60; Acti 9 Acti9 iCT auxiliary; Acti 9 Acti9 iC60; Acti 9 Acti9 iID; Acti 9 Acti9 iSW-NA; Acti 9 Acti9 iDPN Vigi; Acti 9 Acti9 C40; Multi9 Multi9 C60; Acti 9 Acti9 DT40; Acti 9 Acti9 DT60; Acti 9 Acti9 I-NA; Acti 9 Acti9 ITG40; Acti 9 Acti9 iDPN; Acti 9 Acti9 Reflex iC60 Ti24 connector
Commissioning interface	EcoStruxure Power Commission
Market segment	Buildings; Small commercial
Compatibility code	Acti 9 Smartlink
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
IK degree of protection	IK06 conforming to IEC 62262
Pollution degree	3
Environmental characteristic	Corrosive 3C2 conforming to IEC 60721-3-3; Salt mist 2 conforming to IEC 60068-2-52
Vibration resistance	1 gn, amplitude = 3.5 mm (f = 5…300 Hz)10 cycles conforming to EN/IEC 60068-2-6
Shock resistance	15 gn for 11 ms conforming to IEC 60068-2-27
Fire resistance	Other parts: 650 °C ( 30 s ) conforming to IEC 60695-2-10; On connection terminals: 960 °C ( 30 s ) conforming to IEC 60695-2-10
Tropicalisation	2
Relative humidity	0…93 % at 40 °C
Operating altitude	0...2000 m
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…85 °C
Standards	IEC 61010-2-201; IEC 61010-1
Logistical informations
Country of origin	FR
Main
Range of product	Acti9
Product or component type	Smart communication module
Product name	EcoStruxure I/O Smart Link
Device short name	I/O Smart Link
Application type	Load control; Breaker status monitoring; Basic energy metering E
Number max of connected devices	Up to 11 wired devices
Group of channels	1 group of 11 digital channels
Maximum supply current	1.5 A
[Us] rated supply voltage	24 V DC +/- 20 %
Connectivity to devices	Digital input and output; Pulse output meter
Communication service	Modbus server for RS485
Web server	BMS controller compatible
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	3.300 cm
Package 1 Width	6.500 cm
Package 1 Length	37.000 cm
Package 1 Weight	242.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	32
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	8.200 kg

Acti 9 Smartlink. Acti 9 Smartlink Modbus, including 1 x Modbus connector, 1 x 24 V DC connector, 2 x mounting accessories for Multiclip 80 A. Data transfer between the Smartlink and Acti 9 devices such as circuit breakers, residual current circuit breakers, residual current devices.