| Complementary |
| [Us] rated supply voltage | 230 V AC (+/- 20 %) |
| Network frequency | 50/60 Hz |
| Power consumption in VA | 2 VA |
| Digital input number | 1 |
| Input type | Dry contact 230 V AC 2 mA |
| Voltage state 1 guaranteed | >= 164 V for digital input |
| Current state 1 guaranteed | >= 2 mA (digital input) |
| Digital output number | 1 |
| Output type | Dry contact 230 V 0.01...2 A AC |
| Discrete output type | Configurable relay logic |
| Output function | NO/NC programmable |
| Mechanical durability | 100000 cycles for output |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Local signalling | Green, orange and red LED for product status |
| Impulse duration | 300 ms by default - 0 ms, + 300 ms |
| Time between 2 impulse | 100 ms minimum - tolerance: - 0 ms, + 300 ms |
| Colour | White (RAL 9003) |
| 9 mm pitches | 2 |
| Height | 85 mm |
| Material | PA6 GF30 |
| Width | 18 mm |
| Depth | 62 mm |
| Net weight | 80 g |
| Wire stripping length | 14 mm for top connection; 9 mm for bottom connection |
| Tightening torque | Power supply: 2 N.m top; Digital input/output: 1 N.m bottom |
| Standards | EN/IEC 61010-1; ETSI EN 300 328; EN/IEC 62479; ETSI EN 301 489-17; ETSI EN 301 489-1; EN/IEC 61010-2-201; EN/IEC 61326-1 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP20 casing: conforming to IEC 60529; IP40 front face: conforming to IEC 60529 |
| Pollution degree | 3 |
| Overvoltage category | III conforming to IEC 61010-1 |
| IK degree of protection | IK05 |
| Relative humidity | 0…93 % at 40 °C conforming to IEC 60068-2-78 |
| Operating altitude | 0...2000 m |
| Ambient air temperature for operation | -25…60 °C |
| Ambient air temperature for storage | -40…85 °C |
| Fire resistance | 960 °C / 30 s conforming to UL 94 V0 |
| Logistical informations |
| Country of origin | EE |
| Main |
| Range | PowerTag |
| Product or component type | Input and ouput module |
| Device short name | PowerTag C IO 230V |
| Product name | PowerTag Control |
| Concentrator compatibility | Acti9 PowerTag Link C; Wiser IP module; Acti9 PowerTag Link; Acti9 PowerTag Link HD |
| Range compatibility | Acti9 impulse relay; Acti9 contactor; Acti9 iACTs remote indication auxiliary; Acti9 iATLs remote indication auxiliary |
| Communication mode | Radio frequency 2.4…2.4835 GHz IEEE 802.15.4 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.800 cm |
| Package 1 Width | 8.000 cm |
| Package 1 Length | 11.500 cm |
| Package 1 Weight | 116.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 80 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 9.506 kg |
PowerTag Control IO module, switch loads up to 2 A directly using a relay output or an installation contactor (iCT) using a permanent command or a remote switch (iTL) using a pulse command. Status query of a potential-free contact via the digital input. PowerTag Control wireless communication module for control and monitoring applications, 230V AC, 50/60Hz. The PowerTag Control module connects to the Wiser IP module or a PowerTag Link module using radio transmission. Part of the PowerTag system, the Acti 9 PowerTag Link and the Wiser energy management system. On-site control is also possible using a button. The digital output can be switched via an app, the higher-level system or via a timer function. Width 1 HP, weight 80 grams, ISM band 2.4 - 2.4835 GHz. LED light for status display on the front.