Schneider Electric A9XAH357, EAN: 3606480485169

Schneider Electric A9XAH357 phase bar 3-pole+auxiliary switch 57TE

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9XAH357 phase bar 3-pole+auxiliary switch 57TE

Lieske Part No. 612735
Mfg Part No A9XAH357
EAN-Code 3606480485169
Manufacturer Schneider Electric
Here only 80,56 EUR
95,87 EUR incl. VAT

Further information for Schneider Electric A9XAH357 phase bar 3-pole+auxiliary switch 57TE

Complementary
Number of ways16 ways Aux + 3 L
Distribution typeAux L1 L2 L3
Poles configuration for 1 way1 x 3P
Connection pitch18 mm
Connector typeTooth
Distance between way63 mm
MarkingL1 L2 L3
InsulationInsulated
Device presentationCuttable
Provided equipmentSet of 10 end piece
[Ie] rated operational current100 A at 40 °C
[Ue] rated operational voltage415 V AC
[Ui] rated insulation voltage500 V AC conforming to IEC 61439-2
Mounting locationTop or bottom on tunnel type terminals; Top or bottom on double terminal
9 mm pitches114
Width1000 mm
ColourWhite (RAL 9003)
Range compatibilityActi9 iC60; Acti9 iK60; Acti9 iID; Acti9 iID K; Acti9 iSW; Acti9 iSW-NA; Multi9 C60
Contractual warranty
Warranty (in months)18
Environment
Fire resistance960 °C ( 30 s ) conforming to IEC 60695-2-1
Pollution degree3 conforming to IEC 60947-7-1
IP degree of protectionIP20 with end-pieces and tooth covers
Logistical informations
Country of originDE
Main
RangeActi9
Product or component typeComb busbar
Mounting modeHorizontal
Accessory / separate part categoryConnection accessory
Lines description3L
Length in 18 mm modules57
StandardsEN/IEC 61439-1
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height1.500 cm
Package 1 Width3.000 cm
Package 1 Length99.000 cm
Package 1 Weight543.000 g
Unit Type of Package 2BB1
Number of Units in Package 25
Package 2 Height5.500 cm
Package 2 Width9.000 cm
Package 2 Length105.000 cm
Package 2 Weight2.892 kg
Unit Type of Package 3P12
Number of Units in Package 3135
Package 3 Height75.000 cm
Package 3 Width80.000 cm
Package 3 Length120.000 cm
Package 3 Weight92.946 kg
The product A9XAH357 from Schneider Electric is a phase bar strip from the Acti9 series, designed for use in electrical distribution boards and enclosures. It serves as a connection and distribution element for multiple power circuit breakers and auxiliary switches in a horizontal mounting configuration. The bar is 3-pole and includes an additional 16 auxiliary switch paths, making it suitable for complex switching systems with a high number of control and signal connections. The total length is 57 modules on an 18-mm grid, equivalent to a width of 1000 mm. The bar is cuttable, allowing it to be adapted to individual requirements. Labelling is done with L1, L2, L3 to ensure clear phase identification.

Applications
The phase bar is intended for use in distribution boards and enclosures within the field of electrical installation. It is used in combination with power circuit breakers from the Acti9 series (such as iC60, iK60, iID, iSW) as well as Multi 9 C60. The bar enables structured and safe distribution of electrical power to multiple switches and auxiliary switches. Mounting is horizontal, with the bar installed at the top or bottom on tunnel terminals or double terminals. The protection rating IP20 (with end caps and tine covers) makes it suitable for use in enclosed enclosures where protection against contact and contamination is required.

Functions and Equipment in Detail
The bar features a Zink connection type, ensuring a secure and stable connection to the switches. The distance between poles is 63 mm, ensuring compliance with required safety clearances. The bar is fully insulated to prevent short circuits and electrical hazards. The rated insulation voltage (Ui) is 500 V AC, complying with IEC 61439-2. The rated operational voltage (Ue) is 415 V AC, and the rated operational current (Ie) is 100 A at an ambient temperature of 40 °C. The bar is designed for use in environments with pollution degree 3 (according to IEC 60947-7-1), indicating suitability for industrial or complex electrical installations.

Technology Explained Simply
The phase bar is designed as a comb bar, meaning it features a series of tines to which switches are directly connected. The horizontal mounting and 18-mm grid allow for modular and flexible arrangement of devices in the distribution board. The cuttable design enables the bar to be shortened to the required length without compromising electrical properties. The colour is white (RAL 9003), ensuring good visibility and a uniform appearance in the enclosure. The fire resistance of 960 °C (30 seconds) according to IEC 60695-2-1 demonstrates the high safety quality of the material.

Compatibility and Accessories
The bar is compatible with various products from the Acti9 family, including power circuit breakers iC60, iK60, iID, iID K, iSW, iSW-NA, and Multi 9 C60. As accessories, a set of 10 end caps is included in the delivery, which are used to protect the ends of the bar and achieve the IP20 protection rating. Additionally, feed-in terminals (e.g. A9XPCD04, A9XPCM04) or shock protection covers (e.g. A9XPT920) can be used to complete the installation and enhance safety.

Mounting and Installation
Mounting is horizontal, with the bar fixed at the top or bottom to tunnel terminals or double terminals. The tines of the bar are inserted into the corresponding connection points of the switches, creating a firm and reliable connection. The cuttable feature allows for individual adaptation to the specific enclosure width. The end caps are attached to the ends of the bar to ensure the IP20 protection rating and protect the tines.

Operational Advantages
The phase bar offers high reliability and safety due to its insulated construction and compliance with standards EN/IEC 61439-1. The high rated operational voltage and current enable use in high-performance systems. The cuttable design and compatibility with various switch types increase flexibility during planning and installation. The integrated auxiliary switch paths facilitate the integration of control and signal functions into the switching system. The IP20 protection rating and fire resistance contribute to safety and longevity.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/612735
qrcode für Schneider Electric A9XAH357 phase bar 3-pole+auxiliary switch 57TE