| Complementary |
| Number of ways | 38 ways Aux + 1 L |
| Distribution type | Aux L |
| Poles configuration for 1 way | 1 x 1P |
| Connection pitch | 18 mm |
| Connector type | Tooth |
| Distance between way | 27 mm |
| Marking | L |
| Insulation | Insulated |
| Device presentation | Cuttable |
| Provided equipment | Set of 10 end piece |
| [Ie] rated operational current | 100 A at 40 °C |
| [Ue] rated operational voltage | 415 V AC |
| [Ui] rated insulation voltage | 500 V AC conforming to IEC 61439-2 |
| Mounting location | Top or bottom on tunnel type terminals; Top or bottom on double terminal |
| 9 mm pitches | 114 |
| Width | 1000 mm |
| Colour | White (RAL 9003) |
| Range compatibility | Acti9 iC60; Acti9 iK60; Acti9 iID; Acti9 iID K; Acti9 iSW; Acti9 iSW-NA; Multi9 C60 |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Fire resistance | 960 °C ( 30 s ) conforming to IEC 60695-2-1 |
| Pollution degree | 3 conforming to IEC 60947-7-1 |
| IP degree of protection | IP20 with end-pieces and tooth covers |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range | Acti9 |
| Product or component type | Comb busbar |
| Mounting mode | Horizontal |
| Accessory / separate part category | Connection accessory |
| Lines description | 1L |
| Length in 18 mm modules | 57 |
| Standards | EN/IEC 61439-1 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 1.000 cm |
| Package 1 Width | 8.000 cm |
| Package 1 Length | 100.500 cm |
| Package 1 Weight | 222.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 5 |
| Package 2 Height | 5.500 cm |
| Package 2 Width | 9.000 cm |
| Package 2 Length | 107.000 cm |
| Package 2 Weight | 1.285 kg |
| Unit Type of Package 3 | P12 |
| Number of Units in Package 3 | 270 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 120.000 cm |
| Package 3 Weight | 81.984 kg |
The phase bar strip A9XAH157 belongs to the Acti9 series from Schneider Electric and serves as connection accessory for electrical distributors. It is designed as a comb bar and enables safe and structured distribution of electrical power in installation enclosures. The bar is designed for horizontal mounting and has a length of 57 modules on an 18 mm grid, corresponding to a total length of 1000 mm. It is cuttable, allowing adaptation to individual requirements. The bar is rated for an operating voltage of 415 V AC and an operating current of 100 A at 40 °C. The rated insulation voltage is 500 V AC, meeting the requirements of standard IEC 61439-2. The bar is marked with "L" to indicate its assignment to the line bar and features an insulated construction ensuring safe electrical separation.
Applications
The phase bar strip A9XAH157 is intended for use in electrical distributors and enclosures, particularly in installations operating with the Acti9 series. It is compatible with various products from the Acti9 family, including models iC60, iK60, iID, iID K, iSW, iSW-NA, and Multi 9 C60. The bar is used in distributors with a pole configuration of 1 x 1P and is designed for connection of cables via tines. Mounting is done at the top or bottom on tunnel terminals or double terminals, enabling flexible integration into existing installations. The bar is suitable for environments with pollution degree 3 according to IEC 60947-7-1, indicating use in industrial or commercial facilities.
Functions and Equipment in Detail
The bar features 38-pole additional connections and an additional line connection (1L), enabling flexible power distribution to multiple consumers. The spacing between poles is 27 mm, meeting electrical safety requirements. The bar is white (RAL 9003), allowing uniform visual design in distributors. The delivery includes a set of 10 end caps for finishing the ends of the bar and enhancing safety. The bar has a protection rating of IP20 when end caps and tine covers are installed, providing protection against finger contact and solid foreign objects.
Technology Explained Simply
The phase bar serves as a central distribution unit for electrical cables in a distributor. It allows multiple cables to be connected at one point and distributes power to multiple consumers. The tine connections ensure a secure mechanical and electrical connection. The insulation of the bar prevents short circuits and increases safety. The cuttable design allows customized adaptation to the respective enclosure width. The fire resistance of 960 °C for 30 seconds complies with IEC 60695-2-1 and protects the bar against thermal stress.
Compatibility and Accessories
The bar is specifically developed for use with products from the Acti9 series. Compatible devices include, among others, LS switches iC60N and iC60H in various versions, as well as feed terminals A9XPCD04 and A9XPCM04. End caps A9XPE110 can be used additionally to cover the ends of the bar. The shock protection cover A9XPT920 provides additional protection during installation and maintenance.
Mounting and Installation
Mounting is done horizontally in a distributor. The bar is secured to tunnel terminals or double terminals, with mounting possible at the top or bottom. The tine connections allow easy and secure cable connections. End caps are mounted at the ends of the bar to ensure a closed and secure construction. The cuttable design allows precise adaptation to the enclosure geometry.
Operational Advantages
The bar provides structured and safe power distribution. The high operating voltage and current enable use in demanding applications. Compatibility with the Acti9 family ensures a unified system solution. The cuttable design and integrated end caps increase flexibility and safety during installation. Fire resistance and pollution degree 3 make the bar suitable for industrial and commercial environments. The IP20 protection rating with end caps and tine covers ensures a high safety standard.
The bar complies with standard EN/IEC 61439-1 and is designed for use in electrical distributors. The warranty period is 18 months.