Additional features
Device position in system	Outlet
Earth fault trip technology	Voltage-independent
[Ui] Rated insulation voltage	500 V AC 50/60 Hz corresponds to IEC 60947-2
[Uimp] Rated impulse voltage withstand	6 kV corresponds to IEC 60947-2
Compatible product family	Acti9 iC60 circuit breaker
Product compatibility	IC60H/N double terminal miniature circuit-breaker
Local signalling	trip indicator
Mounting mode	Plug-in
Mounting bracket	DIN rail
Electrical connection for LS switch	With screws
Height	91 mm
Width	117 mm
Depth	74 mm
Product weight	0,21 kg
Connections - terminals	Tunnel terminals bottom side 1…35 mm² solid; tunnel terminals bottom side 1…25 mm² stranded
Wire stripping length	14 mm
[M] tightening torque	3,5 Nm
Contractual warranty
Warranty (in months)	18
Main features
Product series	Acti9
Product name	Acti9 Vigi iC60
Product or component type	Additional residual current protective devices
Device short name	Vigi iC60
Pole description	3P
[In] Rated current	63 A
Earth fault sensitivity	300 mA
Earth fault protection time delay	Selective
Residual current protection type	Type A-SI (Superimmunized)
Type of network	AC
Network frequency	50/60 Hz
[Ue] Rated operational voltage	400 V AC 50/60 Hz complies with EN 61009-1; 230/415 V AC 50/60 Hz complies with IEC 61009-1
Standards	EN 61009-1; IEC 61009-1
9-mm pitch	7
Mounting
Degree of protection (IP)	IP20 corresponds to IEC 60529; IP40 (modular housing) corresponds to IEC 60529
Pollution degree	3 corresponds to IEC 60947-2
Electromagnetic compatibility	8/20 µs impulse impedance, 3.000 A corresponds to IEC 61009-1
Operating ambient temperature	-25…60 °C
Ambient temperature during storage	-40…85 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	8,800 cm
VPE 1 width	11,500 cm
VPE 1 length	14,000 cm
Packaging weight (Lbs)	228,000 g
VPE 2 type	S03
VPE 2 quantity	15
VPE 2 height	30,000 cm
VPE 2 width	30,000 cm
VPE 2 length	40,000 cm
VPE 2 weight	3,918 kg

FI block Acti 9 Vigi iC60N/H. 3-pole, nominal current 63A, nominal residual current 300mA, type A, selective, SI, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 500V AC. Can be mounted on the right-hand side of the iC60N/H series circuit breaker. Tripping due to residual current is indicated by a red, mechanical indicator on the knob. Terminals IP 20. Test button for regular function testing. Technology of the trip unit - thermomagnetic. Additional auxiliary modules that can be added in series (optional) - fault signaling switch, auxiliary switch, undervoltage release, overvoltage release, shunt release. The Vigi iC60N/H FI block meets the following standards - IEC/EN 61009-1. This series is also VDE certified!