Complementary
[Ie] rated operational current	100 A at 415 V AC 50/60 Hz
[Ue] rated operational voltage	415 V AC 50/60 Hz
[Icm] rated short-circuit making capacity	5 kA switch-disconnector alone
[Icw] rated short-time withstand current	1500 A
[Ui] rated insulation voltage	500 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage	6 kV
Control type	Toggle
Local signalling	ON/OFF indication
Mounting mode	Fixed
Mounting support	DIN rail
Comb busbar and distribution block compatibility	Top or bottom: YES
9 mm pitches	8
Height	85 mm
Width	72 mm
Depth	73 mm
Colour	White
Mechanical durability	20000 cycles
Electrical durability	10000 cycles
Connections - terminals	Tunnel type terminals (top or bottom) -
Wire stripping length	14 mm
Tightening torque	3.5 N.m
Contact position indicator
Contractual warranty
Warranty (in months)	18
Environment
Standards	BS EN 60947-3; AS 60947-3; NZS 60947-3; IEC 60947-3; EN 60947-3
IP degree of protection	IP20
Pollution degree	3
Tropicalisation	2
Relative humidity	95 % at 55 °C
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…85 °C
Logistical informations
Country of origin	HU
Main
Range	Acti9
Product name	Acti9 iSW
Product or component type	Switch disconnector
Device short name	iSW
Device application	Control; Isolation
Poles description	4P
Utilisation category	AC-22A
Suitability for isolation
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7 cm
Package 1 Width	8 cm
Package 1 Length	6 cm
Package 1 Weight	335 g
Unit Type of Package 2	BB1
Number of Units in Package 2	3
Package 2 Height	8 cm
Package 2 Width	22 cm
Package 2 Length	9.5 cm
Package 2 Weight	1.05 kg
Unit Type of Package 3	S03
Number of Units in Package 3	33
Package 3 Height	30 cm
Package 3 Width	30 cm
Package 3 Length	40 cm
Package 3 Weight	12.521 kg

Acti 9 iSW load-break switch. 4-pole, nominal current 100A, operating voltage (Ue) 415V AC, insulation voltage (Ui) 500V AC, red toggle. Opening and closing of circuits under load. Clear switch position indication by green marking on the device's switch toggle. Additional auxiliary modules that can be added in series (optional): auxiliary switch for status reporting (iOF). Tool-free installation on the left side of the device. Color RAL 9003. The iSW load-break switch meets the following standards: IEC/EN 60947-3.