Schneider Electric A9N61526, EAN: 3606480424267

Schneider Electric A9N61526 circuit breaker 2-pole C60H-DC 6A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9N61526 circuit breaker 2-pole C60H-DC 6A

Lieske Part No. 533920
Mfg Part No A9N61526
EAN-Code 3606480424267
Manufacturer Schneider Electric
Here only 168,15 EUR
200,10 EUR incl. VAT

Further information for Schneider Electric A9N61526 circuit breaker 2-pole C60H-DC 6A

Complementary
Network frequency50/60 Hz
[Ue] rated operational voltage500 V DC
[Ics] rated service breaking capacity15 kA 75 % conforming to EN 60947-2 - 220 V DC; 15 kA 75 % conforming to IEC 60947-2 - 220 V DC; 15 kA 75 % conforming to EN 60947-2 - 250 V DC; 15 kA 75 % conforming to IEC 60947-2 - 250 V DC; 4.5 kA 75 % conforming to EN 60947-2 - 500 V DC; 4.5 kA 75 % conforming to IEC 60947-2 - 500 V DC; 7.5 kA 75 % conforming to EN 60947-2 - 440 V DC; 7.5 kA 75 % conforming to IEC 60947-2 - 440 V DC
[Ui] rated insulation voltage500 V DC conforming to IEC 60947-2; 500 V DC conforming to EN 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN 60947-2; 6 kV conforming to IEC 60947-2
Control typeToggle
Local signallingON/OFF indication
Mounting modeFixed
Mounting support35 mm symmetrical DIN rail
Comb busbar and distribution block compatibilityTop or bottom: standard
9 mm pitches4
Net weight0.256 kg
ColourWhite
Mechanical durability20000 cycles
Electrical durability3000 cycles L/R = 2 ms
Provision for padlockingPadlockable
Locking options descriptionIn position O
Tightening torquePower circuit: 2.5 N.m top or bottom
Earth-leakage protectionWithout
Contact position indicatorYes
Contractual warranty
Warranty (in months)18
Environment
Pollution degree3 conforming to EN 60947-2; 3 conforming to IEC 60947-2
Overvoltage categoryIV
Tropicalisation2 conforming to IEC 60068-2
Operating altitude2000 m
Ambient air temperature for operation-25…70 °C
Ambient air temperature for storage-40…85 °C
Logistical informations
Country of originCN
Main
RangeActi9
Product nameActi9 C60H-DC
Product or component typeMiniature circuit-breaker
Device short nameC60H-DC
Device applicationDistribution
Poles description2P
Number of protected poles2
[In] rated current6 A at 25 °C
Network typeDC
Trip unit technologyThermal-magnetic
Curve codeC
Breaking capacity10 kA Icu at 440 V DC conforming to EN 60947-2; 10 kA Icu at 440 V DC conforming to IEC 60947-2; 6 kA Icu at 500 V DC conforming to EN 60947-2; 6 kA Icu at 500 V DC conforming to IEC 60947-2; 20 kA Icu at 220 V DC conforming to GB 14048.2; 20 kA Icu at 220 V DC conforming to IEC 60947-2; 20 kA Icu at 250 V DC conforming to GB 14048.2; 20 kA Icu at 250 V DC conforming to IEC 60947-2
Utilisation categoryCategory A conforming to EN 60947-2; Category A conforming to IEC 60947-2
Suitability for isolationYes conforming to IEC 60947-2; Yes conforming to EN 60947-2
StandardsEN 60947-2; IEC 60947-2
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height3.500 cm
Package 1 Width7.200 cm
Package 1 Length8.300 cm
Package 1 Weight224.000 g
Unit Type of Package 2BB1
Number of Units in Package 26
Package 2 Height8.400 cm
Package 2 Width9.200 cm
Package 2 Length22.700 cm
Package 2 Weight1.390 kg
Unit Type of Package 3S03
Number of Units in Package 372
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight17.262 kg
The circuit breaker Acti9 C60H-DC from Schneider Electric is a two-pole (2P) switch for direct current (DC) applications with a rated current of 6 A at an ambient temperature of 25 °C. It belongs to the Acti9 series and is designed for use in distribution systems. The protection function is achieved through thermomagnetic tripping technology, which combines both thermal and magnetic tripping mechanisms to ensure safe disconnection in case of overload and short circuit. The C-characteristic of the trip curve ensures selective disconnection during transient load peaks, thereby increasing the reliability of the power supply.

Applications

The switch is designed for industrial and technical applications where safe and reliable power distribution at direct voltage is required. It is suitable for use in energy technology installations, solar systems, automation technology, or vehicle systems. The operating voltage is up to 500 V DC, with the device specified for various voltage levels and different breaking capacities: 20 kA Icu at 220 V DC and 250 V DC, 10 kA Icu at 440 V DC, and 6 kA Icu at 500 V DC. These values comply with standards EN 60947-2 and IEC 60947-2. The usage category is defined as Category A, enabling use in distribution systems with direct connection to the power supply.

Functions and Equipment in Detail

The device features a contact position indicator, which visually signals the current position (ON/OFF). Control is performed via a toggle switch, enabling simple and secure operation. Mounting is tool-free on a 35 mm symmetrical DIN rail, with fastening achieved via a clip lock. Connections are located on the top and bottom of the device and support connections with cables and pin rail terminals. The torque values for the current circuits are 2.5 Nm, with terminals connectable both on top and bottom. The device is lockable and can be secured in the "O" (off) position, which is useful for maintenance work or safety measures.

Technology Explained Simply

The thermomagnetic tripping technology combines two protection principles: during a prolonged overload, a bimetal strip heats up and triggers the switch after a certain time. In case of a sudden short circuit, a magnetic tripping mechanism reacts immediately to quickly interrupt the high current. The C-characteristic means that the switch does not trip at current values up to approximately 5 times the rated current (30 A at 6 A nominal current), making it suitable for systems with high inrush currents. The rated insulation voltage (Ui) is 500 V DC, ensuring electrical insulation for operation at this voltage. The rated impulse voltage withstand (Uimp) of 6 kV protects the device against transient voltage surges.

Compatibility and Accessories

The switch is compatible with various accessory modules that can be optionally mounted. These include auxiliary switches such as the A9N26904 (OF 1OC, 100 mA–6 A AC/DC, connection bottom), current release devices such as the A9N26946 (MX+OF, 220–415 V AC, 110–130 V DC), or undervoltage release devices such as the A9N26969 (MNX, 230 VAC). Additionally, phase rail modules such as the A9XPH206 (2P, 6 modules, 100 A) or A9XPH257 (2-pole, 57 TE, adjustable, 100 A) are available, enabling flexible integration into distribution systems. Mounting is possible on a 35 mm DIN rail, with the device occupying 4 modules (9-mm pitch).

Mounting and Installation

Mounting is tool-free on a 35 mm symmetrical DIN rail. Connections are located on the top and bottom of the device, allowing flexible integration into existing switchgear. The terminals are designed for cables and pin rail terminals. The mechanical life is 20,000 cycles, and the electrical life is 3,000 cycles at a load constant of L/R = 2 ms. The operating temperature range is from -25 °C to +70 °C, and the storage temperature range is from -40 °C to +85 °C. The operating altitude is limited to 2,000 m above sea level. The device is designed for pollution degree 3 and overvoltage category IV, enabling use in industrial environments with increased pollution risk and transient voltage surges.

Advantages in Operation

The switch offers high reliability through thermomagnetic tripping technology and the C-characteristic, which ensures selective disconnection. Tool-free mounting and the integrated contact position indicator simplify installation and maintenance. The lockable feature in the "O" position increases safety during maintenance work. Compatibility with various accessory modules allows flexible adaptation to specific requirements. The device is designed for a long service life, reducing maintenance costs and increasing operational safety. Compliance with standards EN 60947-2 and IEC 60947-2 ensures safe and standard-compliant use in industrial installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/533920
qrcode für Schneider Electric A9N61526 circuit breaker 2-pole C60H-DC 6A