| Complementary |
| Range compatibility | Acti9 C120; Acti9 C60H-DC; Acti9 SW60-DC; Acti9 C60PV-DC; Acti9 xC60 |
| Operating mode | Daisy chain up to 100 devices |
| [Ui] rated insulation voltage | 500 V |
| [Uimp] rated impulse withstand voltage | 4 kV |
| Local signalling | Mechanical indicator |
| Mounting mode | Clip-on |
| Mounting location | Left side of circuit-breaker |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top: YES |
| Height | 85.3 mm |
| Width | 9 mm |
| Depth | 68 mm |
| Net weight | 30 g |
| Colour | White |
| Connections - terminals | Screw clamp terminal (bottom): 1 cable(s) 0.5…2.5 mm² - rigid; Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible; Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible with ferrule |
| Wire stripping length | 9 mm |
| Tightening torque | 1 N.m bottom |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP20 |
| Pollution degree | 3 |
| Tropicalisation | 2 |
| Ambient air temperature for operation | -25…70 °C |
| Ambient air temperature for storage | -40…85 °C |
| Logistical informations |
| Country of origin | CN |
| Main |
| range of product | Acti9 |
| Product or component type | Fault contact |
| Device short name | SD |
| Signal contacts composition | 1 C/O |
| [In] rated current | 2…100 mA at 24...240 V, AC 50/60 Hz; 2…100 mA at 24 V, DC; 2…100 mA at 48 V, DC; 2…100 mA at 60 V, DC; 2…100 mA at 130 V, DC; 2…100 mA at 220 V, DC |
| 9 mm pitches | 1 |
| Standards | EN/IEC 60947-5-1; EN/IEC 60947-5-4; GB/T 14048.5; GB/T 14048.17 |
| Product certifications | CE; UKCA |
| Quality labels | EAC; CCC |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.000 cm |
| Package 1 Width | 7.700 cm |
| Package 1 Length | 9.500 cm |
| Package 1 Weight | 38.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 8.500 cm |
| Package 2 Width | 10.000 cm |
| Package 2 Length | 23.500 cm |
| Package 2 Weight | 519.000 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 120 |
| Package 3 Height | 30.000 cm |
| Package 3 Width | 30.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 5.690 kg |
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC &, 24VDC to 220VDC. Fault, signaling contact. It has 1 position switch with 1 changeover type contacts. Intended for installations in small commercial businesses, buildings, critical infrastructure, healthcare, industry, data centers. This electrical accessory is compatible with Acti9 ranges such as C120, C60H-DC, SW60-DC, C60PV-DC. The SD is used for either the device short name or the compatibility code. The mechanical indicator is provided in the product for local signaling. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section ranges from 0.5mm² to 2.5mm². Screw terminal connection on the bottom. The connector allows flexible copper cables. The cable cross section 2 cables allows a cable cross section of 1.5mm². It has a screw terminal connection on the bottom. The connector allows flexible laying of copper cables with ferrule (2 cables) with a cable cross section of 1.5mm². The Ui rated insulation voltage is up to 500 V. The rated impulse voltage Uimp is 4kV. It can be mounted on a DIN rail for modular installation. The width in 9 mm pitch is 1. The dimensions are (W) 9 mm x (H) 85.3 mm x (D) 68 mm. The color of the product is white. The product weighs 30 g. The pollution degree is 3. The tropicalization degree is treatment 2. The stripping length is 9 mm. The tightening torque for the connection is 1N.m (below) for the screwdriver type PZ1. The IP protection class is IP20. The operating temperature is between -25°C and +70°C. The storage temperature ranges from -40°C to +85°C. This product complies with EN/IEC 60947-5-1, EN/IEC 60947-5-4, GB/T 14048.5 and GB/T 14048.17. With EAC and CCC quality label and certified with CE and UKCA certificates.