Schneider Electric A9N26907, EAN: 3606486366165

Schneider Electric A9N26907 remote switch Acti9 SD 100 mA–6 A AC/DC bottom connection

Installation > Modular devices / equipment installation > Modular devices, switches, buttons, etc.

Schneider Electric A9N26907 remote switch Acti9 SD 100 mA–6 A AC/DC bottom connection

Lieske Part No. 1104012
Mfg Part No A9N26907
EAN-Code 3606486366165
Manufacturer Schneider Electric
Here only 42,37 EUR
50,42 EUR incl. VAT

Further information for Schneider Electric A9N26907 remote switch Acti9 SD 100 mA–6 A AC/DC bottom connection

Complementary
Range compatibilityActi9 C120; Acti9 C60H-DC; Acti9 SW60-DC; Acti9 C60PV-DC; Acti9 xC60
[Ui] rated insulation voltage500 V
[Uimp] rated impulse withstand voltage4 kV
Local signallingMechanical indicator
Mounting modeClip-on
Mounting locationLeft side of circuit-breaker
Mounting supportDIN rail
Comb busbar and distribution block compatibilityTop: YES
Height85.3 mm
Width9 mm
Depth68 mm
Net weight30 g
ColourWhite
Connections - terminalsScrew clamp terminal (bottom): 1 cable(s) 0.5…2.5 mm² - rigid; Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible; Screw clamp terminal (bottom): 2 cable(s) 1.5 mm² - flexible with ferrule
Wire stripping length9 mm
Tightening torque1 N.m bottom
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
Pollution degree3
Tropicalisation2
Ambient air temperature for operation-25…70 °C
Ambient air temperature for storage-40…85 °C
Logistical informations
Country of originBE
Main
range of productActi9
Product or component typeFault contact
Device short nameSD
Signal contacts composition1 C/O
[In] rated current0.1…6 A at 24...250 V, AC 50/60 Hz; 0.1…6 A at 24...240 V, AC 50/60 Hz; 0.1…3 A at 415 V, AC 50/60 Hz; 0.1…6 A at 24 V, DC; 0.1…2 A at 48 V, DC; 0.1…1.5 A at 60 V, DC; 0.1…1 A at 130 V, DC
9 mm pitches1
StandardsEN/IEC 60947-5-1; GB/T 14048.5
Product certificationsCE; UKCA
Quality labelsEAC; CCC
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.700 cm
Package 1 Width1.800 cm
Package 1 Length9.200 cm
Package 1 Weight36.000 g
Unit Type of Package 2BB1
Number of Units in Package 212
Package 2 Height8.000 cm
Package 2 Width10.000 cm
Package 2 Length23.500 cm
Package 2 Weight492.000 g
Unit Type of Package 3S03
Number of Units in Package 3108
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight5.038 kg
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current is 6A from 24VAC to 240VAC, 3A from 277VAC and 415VAC at a frequency of 50Hz to 60Hz. Operating current of 6A is at 24VDC, 2A at 48VDC, 1.5A at 60VDC, 1A at 110VDC and 130VDC. It has 1 position switch with type 1 changeover contact. Intended for installations in small commercial premises, buildings, critical infrastructure, healthcare, industry, data centers. This OC contact is compatible with Acti9 ranges such as C120, C60H-DC, SW60-DC, C60PV-DC. The SD is used for either the device short name or the compatibility code. The mechanical indicator is provided in the product for local signaling. It has a screw terminal connection on the bottom. The connector allows rigid copper cables with a cable cross-section of 0.5mm² to 2.5mm². It has a screw terminal connection on the bottom. The connector allows flexible copper cables (2 cables) with a cable cross-section of 1.5mm². It has a screw terminal connection on the bottom. The connector allows flexible laying of copper cables with ferrule (2 cables) with a cable cross-section of 1.5mm². The Ui rated insulation voltage is up to 500 V. The rated impulse voltage Uimp is 4 kV. It can be mounted on a DIN rail for modular installation. The width in 9 mm pitch is 1. The dimensions are (W) 9 mm x (H) 85.3 mm x (D) 68 mm. The color of the product is white. The product weight is 30g. The pollution degree is 3. The tropicalization degree is treatment 2. The stripping length is 9mm. The terminal tightening torque is 1N.m (below) for screwdriver type PZ1. The IP protection degree is IP20. The operating temperature range is -25°C to +70°C. The storage temperature range is -40°C to +85°C. This product meets EN/IEC 60947-5-1 and GB/T 14048.5 standards. It has EAC and CCC quality labels and is certified with CE and UKCA certificates.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1104012
qrcode für Schneider Electric A9N26907 remote switch Acti9 SD 100 mA–6 A AC/DC bottom connection