This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is 6A from 24VAC to 240VAC, 3A from 277VAC and 415VAC at a frequency of 50Hz to 60Hz. Operating current of 6A is at 24VDC, 2A at 48VDC, 1.5A at 60VDC, 1A at 110VDC and 130VDC. It has 1 position switch with type 1 changeover contact. Intended for installations in small commercial premises, buildings, critical infrastructure, healthcare, industry, data centers. This OC contact is compatible with Acti9 ranges such as C120, C60H-DC, SW60-DC, C60PV-DC. The OF is used for either the device abbreviation or the compatibility code. It has a screw terminal connection on the bottom. The connector allows rigid copper cables with a cable cross section of 0.5mm² to 2.5mm². It has a screw terminal connection on the bottom. The connector allows flexible copper cables (2 cables) with a cable cross section of 1.5mm². It has a screw terminal connection on the bottom. The connector allows flexible copper cables with ferrule (2 cables) with a cable cross section of 1.5mm². The Ui rated insulation voltage is up to 500V. The Uimp rated impulse voltage is 4 kV. It can be mounted on DIN rail for modular installation. The width in 9 mm pitch is 1. The dimensions are (W) 9 mm x (H) 85.3 mm x (D) 68 mm. The product color is white. The product weight is 30 g. The pollution degree is 3. The degree of tropicalization is treatment 2. The stripping length is 9mm. The tightening torque of the terminal is 1N.m (below) for the screwdriver type PZ1. The IP protection class is IP20. The operating temperature ranges from -25°C to +70°C. The storage temperature ranges from -40°C to +85°C. This product meets EN/IEC 60947-5-1 and GB/T 14048.5 standards. It has EAC and CCC quality marks and is certified with CE and UKCA certificates.