Complementary
Device location in system	Outgoer; Group incomer
Network frequency	50/60 Hz
[Ue] rated operational voltage	400...415 V AC 50/60 Hz
Residual current tripping technology	Voltage independent
[Ui] rated insulation voltage	500 V AC 50/60 Hz conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage	6 kV conforming to IEC 60947-2
Mounting mode	Clip-on
Mounting support	35 mm symmetrical DIN rail
Electrical connection to mcb	By screws
9 mm pitches	10
Height	95 mm
Width	198 mm
Depth	73 mm
Net weight	0.58 kg
Colour	White
Mechanical durability	20000 cycles
Connections - terminals	Tunnel type terminals 1…35 mm² flexible; Tunnel type terminals 1…50 mm² rigid
Wire stripping length	15 mm
Tightening torque	3.5 N.m
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Pollution degree	3 conforming to IEC 60947-2
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…60 °C
Logistical informations
Country of origin	FR
Main
Range	Acti9
Product name	Acti9 Vigi C120
Product or component type	Add-on residual current device
Device short name	Vigi C120
Poles description	4P
[In] rated current	125 A
Network type	AC
Earth-leakage sensitivity	30 mA
Earth-leakage protection time delay	Instantaneous
Earth-leakage protection class	Type A
Standards	EN 61009; IEC/EN 61009-2-1
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	9.100 cm
Package 1 Width	13.300 cm
Package 1 Length	25.000 cm
Package 1 Weight	800.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	8
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	6.893 kg

Acti 9 Vigi C120 residual current block. 4-pole, nominal residual current 30mA, type A, operating voltage (Ue) 230-415V AC, insulation voltage (Ui) 500V AC. Can be mounted on the right-hand side of the C120 series circuit breaker. Tripping due to residual current is indicated by a red, mechanical indicator on the knob. Terminals IP 20. Test button for regular function testing. Technology of the trip unit - thermomagnetic. Additional auxiliary modules that can be added in series (optional) - fault signaling switch, auxiliary switch, undervoltage release, overvoltage release, shunt release. The Vigi C120 residual current block complies with the following standards - IEC/EN 61009-1.