Schneider Electric A9N18511, EAN: 3606480380822

Schneider Electric A9N18511 circuit breaker 3-pole 63A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9N18511 circuit breaker 3-pole 63A

Lieske Part No. 1856461
Mfg Part No A9N18511
EAN-Code 3606480380822
Manufacturer Schneider Electric
Here only 393,30 EUR
468,03 EUR incl. VAT

Further information for Schneider Electric A9N18511 circuit breaker 3-pole 63A

Complementary
Network frequency50/60 Hz
Magnetic tripping limit10...14 x In
[Ics] rated service breaking capacity7500 A 50 % conforming to EN/IEC 60898-1 - 400 V AC 50/60 Hz; 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz; 15 kA 50 % conforming to EN/IEC 60947-2 - 220...240 V AC 50/60 Hz; 7.5 kA 50 % conforming to EN/IEC 60947-2 - 380...415 V AC 50/60 Hz; 15 kA 100 % conforming to EN/IEC 60947-2 -
Limitation class3 conforming to EN/IEC 60947-2
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-2
Control typeToggle
Local signallingON/OFF indication
Mounting modeClip-on
Mounting support35 mm symmetrical DIN rail
9 mm pitches9
Height81 mm
Depth73 mm
Width81 mm
Net weight0.615 kg
ColourWhite
Mechanical durability20000 cycles
Electrical durability10000 cycles conforming to IEC 60947-2
Locking options descriptionHandle sealable with cable diameter 0.7mm in OFF or ON position
Connections - terminalsTunnel type terminals1…50 mm² rigid; Tunnel type terminals1.5…35 mm² flexible
Wire stripping length15 mm
Tightening torque3.5 N.m
Earth-leakage protectionSeparate block
Contact position indicatorYes
Comb busbar and distribution block compatibilityYES
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree3 conforming to IEC 60947-2
Overvoltage categoryIV
Tropicalisation2 conforming to IEC 60068-1
Relative humidity95 % at 55 °C
Operating altitude2000 m
Ambient air temperature for operation-30…60 °C
Ambient air temperature for storage-40…70 °C
Logistical informations
Country of originFR
Main
RangeActi9
Product nameActi9 C120
Product or component typeMiniature circuit-breaker
Device short nameC120H
Device applicationDistribution
Poles description3P
Number of protected poles3
[In] rated current63 A at 30 °C
Network typeAC; DC
Trip unit technologyThermal-magnetic
Curve codeD
Breaking capacity15000 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1; 10 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 30 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA Icu at
Suitability for isolationYes conforming to IEC 60947-2
StandardsEN/IEC 60898-1; EN/IEC 60947-2
Product certificationsEAC
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.500 cm
Package 1 Width8.200 cm
Package 1 Length8.700 cm
Package 1 Weight563.000 g
Unit Type of Package 2BB1
Number of Units in Package 24
Package 2 Height8.500 cm
Package 2 Width9.200 cm
Package 2 Length33.500 cm
Package 2 Weight2.316 kg
Unit Type of Package 3S03
Number of Units in Package 324
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight14.456 kg
Circuit breaker Acti 9 C120H, 15kA (IEC/EN 60898-1), 15kA (IEC/EN 60947-2). 3-pole, nominal current 63A, D characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Protecting circuits against short-circuit currents and overload currents. Terminals IP20. Fully open contacts are indicated by the 'OFF' marking on the switch knob, so that work on the downstream system part can be carried out with due safety. Power supply from above and below. Snap action for low-wear switching of the contacts. Technology of the trip unit - thermomagnetic. Can be combined with the FI Block Vigi for C120. Additional auxiliary modules that can be added (optional) - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. Color RAL 9003. The C120H circuit breaker meets the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. This series is also VDE certified!
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1856461
qrcode für Schneider Electric A9N18511 circuit breaker 3-pole 63A