Schneider Electric A9N18376, EAN: 3606480379475

Schneider Electric A9N18376 circuit breaker 4-pole C125A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9N18376 circuit breaker 4-pole C125A

Lieske Part No. 559905
Mfg Part No A9N18376
EAN-Code 3606480379475
Manufacturer Schneider Electric
Here only 749,55 EUR
891,96 EUR incl. VAT

Further information for Schneider Electric A9N18376 circuit breaker 4-pole C125A

Complementary
Network frequency50/60 Hz
[Ue] rated operational voltage380...415 V AC 50/60 Hz;
Magnetic tripping limit5...10 x In
[Ics] rated service breaking capacity7500 A 75 % conforming to EN/IEC 60898-1 - 400 V AC 50/60 Hz; 4.5 kA 75 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz; 7.5 kA 75 % conforming to EN/IEC 60947-2 - 380...415 V AC 50/60 Hz; 15 kA 75 % conforming to EN/IEC 60947-2 - 220...240 V AC 50/60 Hz; 10 kA 100 % conforming to EN/IEC 60947-2 -
Limitation class3 conforming to EN/IEC 60947-2
[Ui] rated insulation voltage500 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-2
Control typeToggle
Local signallingON/OFF indication
Mounting modeClip-on
Mounting support35 mm symmetrical DIN rail
9 mm pitches12
Height81 mm
Depth73 mm
Width108 mm
Net weight0.82 kg
ColourWhite
Mechanical durability20000 cycles
Electrical durability5000 cycles conforming to IEC 60947-2
Locking options descriptionHandle sealable with cable diameter 0.7mm in OFF or ON position
Connections - terminalsTunnel type terminals1…50 mm² rigid; Tunnel type terminals1.5…35 mm² flexible
Wire stripping length15 mm
Tightening torque3.5 N.m
Earth-leakage protectionSeparate block
Contact position indicatorYes
Comb busbar and distribution block compatibilityYES
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to IEC 60529
Pollution degree3 conforming to IEC 60947-2
Overvoltage categoryIV
Tropicalisation2 conforming to IEC 60068-1
Relative humidity95 % at 55 °C
Operating altitude2000 m
Ambient air temperature for operation-25…70 °C
Ambient air temperature for storage-40…85 °C
Main
RangeActi9
Product nameActi9 C120
Product or component typeMiniature circuit-breaker
Device short nameC120N
Device applicationDistribution
Poles description4P
Number of protected poles4
[In] rated current125 A at 30 °C
Network typeAC; DC
Trip unit technologyThermal-magnetic
Curve codeC
Breaking capacity10000 A Icn at 400 V AC 50/60 Hz conforming to EN/IEC 60898-1; 6 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA Icu at
Suitability for isolationYes conforming to IEC 60947-2
StandardsEN/IEC 60947-2; EN/IEC 60898-1
Product certificationsEAC
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height7.600 cm
Package 1 Width8.600 cm
Package 1 Length10.600 cm
Package 1 Weight776.000 g
Unit Type of Package 2BB1
Number of Units in Package 23
Package 2 Height8.400 cm
Package 2 Width9.400 cm
Package 2 Length33.200 cm
Package 2 Weight2.390 kg
Unit Type of Package 3S03
Number of Units in Package 318
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight14.870 kg
The circuit breaker Acti9 C120N from Schneider Electric is a four-pole (4P) switch from the Acti9 series, designed for distribution in electrical installations. It features a rated current of 125 A at an ambient temperature of 30 °C and is designed for operating voltages of 380 to 415 V AC at 50/60 Hz. The protection function is achieved through thermal-magnetic tripping technology with a C-characteristic, ensuring a balanced response to short-term current surges and sustained overloads. The magnetic tripping threshold lies between 5- and 10-times the rated current, enabling rapid disconnection under short-circuit conditions.

Applications

The switch is designed for use in distribution systems, particularly in industrial and commercial installations where reliable current protection is required. It is suitable for networks with alternating and direct voltage (AC/DC), with specific operating conditions determining the application scope. The protection rating IP20 and pollution degree 3 according to IEC 60947-2 make it suitable for indoor use where no direct mechanical impact or high pollution risks exist. The overvoltage category IV and drip-proof rating 2 (according to IEC 60068-1) indicate application in installations with low overvoltage stress.

Functions and Equipment in Detail

The switch features a contact position indicator and local ON/OFF signaling, making the operating status visually identifiable. Control is performed via a toggle switch, which has a mechanical life of 20,000 cycles and an electrical life of 5,000 cycles (according to IEC 60947-2). The terminals consist of tunnel terminals for fixed conductors with cross-sections from 1 to 50 mm² and for flexible conductors from 1.5 to 35 mm². The wire stripping length is 15 mm, and the required tightening torque is 3.5 Nm. The locking option allows securing the handle with a cable diameter of 0.7 mm in the ON or OFF position.

Technology Explained Simply

The thermal-magnetic tripping technology combines two principles: the thermal component responds to sustained overloads by separating the contact via a bimetal strip expanding due to heat. The magnetic component disconnects immediately in case of sudden, high current surges (short circuit). The C-characteristic means the switch trips within seconds at 5- to 10-times the rated current, typical for installations with motor loads. The limiting class 3 (according to EN/IEC 60947-2) indicates the switch is designed for disconnection of short circuits with limited energy.

Compatibility and Accessories

The switch is designed for mounting on a 35 mm symmetrical DIN rail and can be combined with comb rails and distribution blocks. It is compatible with various accessories, including overload release units (e.g. A9N26476), undervoltage release units (e.g. A9N26971), RCD blocks (e.g. A9N18579), and remote control switches (e.g. A9N26907). These modules extend functionality, such as integrating residual current protection or remote control. Mounting is done by clipping, with device height of 81 mm and width of 108 mm aligned to a 12-fold 9 mm grid.

Mounting and Installation

Installation is performed on a standardized DIN rail, with device dimensions (height 81 mm, width 108 mm, depth 73 mm) enabling compact placement in distribution enclosures. The operating temperature ranges from -25 °C to +70 °C, and storage temperature from -40 °C to +85 °C. The maximum operating altitude is 2,000 m above sea level. The insulation voltage is 500 V AC, and the impulse voltage withstand is 6 kV, enabling use in installations with medium voltage safety.

Advantages in Operation

The switch offers high reliability through thermal-magnetic tripping and long service life. Integrated signaling simplifies maintenance and fault diagnosis. Compatibility with various add-on modules allows flexible adaptation to specific requirements. Mounting on DIN rail and standard dimensions ensure easy integration into existing distribution systems. The rating for 125 A at 30 °C makes it suitable for medium to high loads, with breaking capacity (e.g. 10 kA Icu at 380–415 V AC) ensuring safety in industrial installations.

Standards and Certifications

The switch complies with standards EN/IEC 60947-2 and EN/IEC 60898-1, which define requirements for power circuit breakers and circuit breakers. Certification according to EAC (Eurasian Conformity) confirms compliance with technical requirements of the EAEU. The insulation capability according to IEC 60947-2 enables use in installations requiring electrical isolation.

Color and Design

The switch is finished in White (color tone RAL 9003), enabling uniform visual design in distribution enclosures. The surface is designed for indoor use, with protection rating IP20 preventing contact with moving parts.

Product Weight and Dimensions

The device weighs 0.82 kg and has dimensions of 108 mm (width) × 81 mm (height) × 73 mm (depth). These values are relevant for planning distribution enclosures, as they influence placement and air clearance to other components.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/559905
qrcode für Schneider Electric A9N18376 circuit breaker 4-pole C125A