| Complementary |
| [In] rated current | 2 A; 4 A; 6 A; 10 A; 16 A; 20 A; 25 A |
| Fuse type | aM fuse; gG fuse |
| Fuse size | 10.3 x 38 mm |
| [Ue] rated operational voltage | 500 V AC |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| 9 mm pitches | 2 |
| Height | 81 mm |
| Width | 18 mm |
| Depth | 75 mm |
| Colour | White |
| Connections - terminals | Screw clamp terminals1 cable(s) 0.75…10 mm² rigid; Screw clamp terminals1 cable(s) 0.5…6 mm² flexible; Screw clamp terminals2 cable(s) 0.75…4 mm² rigid; Screw clamp terminals2 cable(s) 0.5…6 mm² flexible |
| Wire stripping length | 12 mm |
| Tightening torque | 2 N.m |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 60269-1/2; IEC EN 60947-3 |
| IP degree of protection | IP20 |
| Pollution degree | 3 |
| Ambient air temperature for operation | -20…60 °C |
| Ambient air temperature for storage | -40…80 °C |
| Logistical informations |
| Country of origin | BG |
| Main |
| Range | Acti9 |
| Product name | Acti9 STI |
| Product or component type | Fuse-disconnector |
| Device short name | STI |
| Poles description | 1P + N |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 1.700 cm |
| Package 1 Width | 7.600 cm |
| Package 1 Length | 8.000 cm |
| Package 1 Weight | 72.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 8.500 cm |
| Package 2 Width | 9.400 cm |
| Package 2 Length | 22.300 cm |
| Package 2 Weight | 918.000 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 144 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 11.661 kg |
Circuit breaker Acti 9 C120H, 15kA (IEC/EN 60898-1), 15kA (IEC/EN 60947-2). 3-pole, nominal current 100A, D characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Protecting circuits against short-circuit currents and overload currents. Terminals IP20. Fully open contacts are indicated by the OFF marking on the switch knob, so that work on the downstream system part can be carried out with due safety. Power supply from above and below. Snap action for low-wear switching of the contacts. Technology of the trip unit - thermomagnetic. Can be combined with the FI Block Vigi for C120. Additional auxiliary modules that can be added (optional) - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. Color RAL 9003. The C120H circuit breaker meets the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. This series is also VDE certified.