Complementary
Poles description	1P + N
Type of measurement	Active power
Device application	Sub billing
Accuracy class	Class 1 active energy conforming to IEC 62053-21; Class B active energy conforming to EN 50470-3
Analogue input type	Direct input
Maximum current [Imax]	40 A
[Ib] basic current	5 A
Rated current	40 A
Rated voltage	230 V +/- 20 %
Network frequency	50 Hz; 60 Hz
Frequency measurement range	48…62 Hz
Technology type	Electronic
Display type	Electromechanical
Sampling rate	32 samples/cycle
Measurement current	0.25…40 A
Display digits	7
Maximum value measured	999999.9 kWh
Communication port protocol	-
Communication port support	-
Local signalling	Green indicator light: power ON; Yellow indicator light: metering and activity 3200 p/kWh
Number of inputs	0
Number of outputs	1 pulse energy monitoring:
Output voltage	5...35 V DC@20 mA
Impulse duration	120 ms
Maximum power consumption in VA	10 VA at 240 V AC
Mounting mode	Clip-on
Mounting support	DIN rail
Connections - terminals	Power circuit: tunnel type terminals (bottom) 1 10 mm² cable(s) ; Remote transfer: tunnel type terminals (top) 1 4 mm² cable(s)
Tightening torque	Power circuit: 1.2 N.m; Remote transfer: 0.8 N.m
Standards	IEC 62053-21; IEC 61557-12; EN 50470-3
Product certifications	CE; EAC; EAC (metrology); MID-B; MID-D
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP40 front panel: conforming to IEC 60529; IP20 casing:
Ambient air temperature for operation	-10…55 °C
Ambient air temperature for storage	-40…70 °C
Operating altitude	< 2000 m
Relative humidity	0…95 % at 55 °C
Colour	White
9 mm pitches	2
Width	18 mm
Height	96.5 mm
Depth	69 mm
Net weight	0.073 kg
Logistical informations
Country of origin	CN
Main
Range	Acti9
family	Acti9 iEM2000
Product or component type	Energy meter
Device short name	iEM2010
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	3.500 cm
Package 1 Width	7.700 cm
Package 1 Length	10.000 cm
Package 1 Weight	126.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	38
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	5.015 kg

The iEM2010 energy meter offers an attractive offer for single-phase, DIN rail mounted energy meters for billing or partial metering applications. This product family allows energy consumption to be recorded for each floor, office area or unit and energy costs to be allocated for building management. It has a 7-digit mechanical display to show active energy. With Class 1 accuracy for active energy according to IEC 62053-21 standard, the meter measures active energy. Suitable for a 230VAC network, with a supply voltage range of 184 to 276 VAC at 50Hz or 60Hz. Direct current measurement up to 40A with 32 samples per cycle in a single phase and neutral configuration only. Communication is ensured by 1 pulse output. Product dimensions are as follows: width 18 mm, depth 67 mm, height 95 mm and product weight 73 g. This version complies with EN 50470-3 Class B, Measuring Instruments Directive (MID). Compatible with energy management software to take advantage of the benefits of digital installation.