Complementary
Form factor	Rope
Mounting mode	Clip-on (DIN rail)
Electrical connection (voltage sensing & power supply)	Removable spring terminal block
Cable cross section	1 rigid cable 0.2…1.5 mm² without cable end; 1 stranded cable 0.2…2.5 mm² without cable end; 1 stranded cable 0.25…1.5 mm² with cable end
Wire stripping length	11 mm
Cable length	1 m for sensor
current sensor diameter	Closed: 100 mm
supply voltage	100...277 V AC, +/- 20 %, phase to neutral; 173...480 V AC, +/- 20 %, phase to phase
Network frequency	50 Hz; 60 Hz
Maximum power consumption	3 VA
Standards	IEC 61557-12; IEC 61010-1; ETSI EN 301 489-1; IEC 61010-2-030; IEC 61326-1; ETSI EN 300 328
Product certifications	UL listed; IEC; DNV Marine
Number of 9mm pitches on Din rail	2
Height	Base unit: 105 mm
Width	Base unit: 18 mm
Depth	Base unit: 67.5 mm
Colour	White (RAL 9003)
Contractual warranty
Warranty (in months)	18
Environment
Maximum conductor temperature	105 °C
Quality labels	CE
Directives	2014/53/EU - radio equipment directive
Operating altitude	0...2000 m
Ambient air temperature for operation	-25…70 °C
Ambient air temperature for storage	-40…85 °C
Overvoltage category	IV conforming to IEC 61010-1
Measurement category	Category IV conforming to IEC 61010-2-030
IP degree of protection	IP20 conforming to IEC 60529
IK degree of protection	IK05
Pollution degree	3
Relative humidity	0…95 % at 55 °C conforming to IEC 60721-3-3
Vibration resistance	3M4 conforming to IEC 60721-3-3
Electromagnetic compatibility	Industrial electromagnetic environment conforming to IEC 61326-1; Radiated EMC conforming to ETSI EN 301 489-17; Electromagnetic emission conforming to IEC 62311
environmental characteristics	Indoor use
Logistical informations
Country of origin	LV
Main
Range of product	PowerLogic
Product name	PowerTag R1000
Product or component type	Energy sensor
Poles	3P; 3P + N
Maximum current [Imax]	1000 A
[Ib] Basic current	150 A
Starting current	600 mA
Saturation current	2000 A
Product specific application	Energy management; Overload alarm; Power factor; Load monitoring; Circuit monitoring
Concentrator compatibility	EcoStruxure Panel Server Entry; EcoStruxure Panel Server Universal; EcoStruxure Panel Server Advanced; PowerLogic T300; Harmony Hub; Acti9 PowerTag Link; Acti9 PowerTag Link HD
Range compatibility	Masterpact MasterPact MTZ for switch disconnector; Masterpact MasterPact NW; Masterpact MasterPact NT; Compact NS Compact NS100; Compact NS Compact NS250; Compact NS Compact NS400; Compact NS Compact NS630; Acti9; TeSys
Type of measurement	Active and reactive energy; Apparent energy; Active and reactive power; Apparent power; Current; Voltage; Power factor; Internal temperature; Frequency
Accuracy class	Class 1 active energy conforming to IEC 61557-12; Class 2 reactive energy conforming to IEC 61557-12; Class 2 apparent energy conforming to IEC 61557-12; Class 1 active power conforming to IEC 61557-12; Class 2 reactive power conforming to IEC 61557-12; Class 2 apparent power conforming to IEC 61557-12; Class 1 current conforming to IEC 61557-12; Class 0.5 voltage conforming to IEC 61557-12; Class 1 power factor conforming to IEC 61557-12; Class 0.5 frequency conforming to IEC 61557-12
Mounting location	Top or bottom
Mounting support	Busbar; Cables
Product destination	Switchboard
Event management	Voltage loss with measured current at voltage loss
Transmission support medium	Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4
Emission power	10 mW
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	8.000 cm
Package 1 Width	17.500 cm
Package 1 Length	20.000 cm
Package 1 Weight	559.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	7
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	4.350 kg

The PowerTag Energy R1000 3P/3P+N is a wirelessly communicating energy meter. With its Rogowski current transformers, it is suitable for 3P and 3P+N measuring points with a nominal current of up to 1000A. The energy meter must be connected to a concentrator or a gateway. It is specifically designed for energy management, load monitoring and availability applications. It includes accurate real-time measurements of active, reactive and apparent energy, active, reactive and apparent power, current, voltage and power factor. With 4 quadrant energy measurement. In the event of a power failure, it sends a voltage loss alarm and the value of the current per phase before being switched off. PowerTag Energy R1000 complies with the IEC 61557-12 standard. It is a PMD-II/DD/K70/1. The accuracy class is Class 1. The Imax maximum current is 1000A. The Ib base current is 150A. The saturation current is 2000A and the actual inrush current is 600mA. The Un rated voltage is phase-neutral 100 to 277VAC +/- 20% and phase-phase 173 to 480VAC +/- 20%. The maximum consumption is less than or equal to 3VA. It can be mounted either on bare or insulated busbars or on cables. The product color is white (RAL9003). The weight is 360 g. The protection class is IP20 (IP40 front) and IK05. The operating temperature is between -25°C and +70°C. The storage temperature is between -40°C and +85°C.