Complementary
Form factor	Flex
Mounting mode	By screws (terminals)
Electrical connection (voltage sensing & power supply)	Wires with cable end
Cable cross section	1 rigid cable 1.5…16 mm²; 2 stranded cable 1.5…2.5 mm²; 2 rigid cable 1.5…2.5 mm²; 1 stranded cable 1.5…16 mm²
Cable length	0.25 m
supply voltage	200...240 V AC, +/- 20 %
Cable composition	1 x 0.33 mm²
Network frequency	50 Hz; 60 Hz
Maximum power consumption	1 VA
Standards	IEC 61557-12; IEC 61010-1; IEC 61010-2-030; IEC 61326-1; ETSI EN 300 328; ETSI EN 301 489-1
Product certifications	IEC; DNV Marine
Height	Sensor element: 20 mm
Width	Sensor element: 18 mm
Depth	Sensor element: 44.5 mm
Net weight	16 g
Colour	White (RAL 9003)
Compatibility code	PowerTag A9 P63
Contractual warranty
Warranty (in months)	18
Environment
Quality labels	CE
Directives	2014/53/EU - radio equipment directive
Operating altitude	0...2000 m
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…85 °C
Overvoltage category	III conforming to IEC 61010-1
Measurement category	Category III conforming to IEC 61010-2-030
IP degree of protection	IP20 conforming to IEC 60529
IK degree of protection	IK05
Pollution degree	3
Relative humidity	0…95 % at 45 °C conforming to IEC 60721-3-3
Vibration resistance	3M4 conforming to IEC 60721-3-3
Electromagnetic compatibility	Industrial electromagnetic environment conforming to IEC 61326-1; Radiated EMC conforming to ETSI EN 301 489-17; Electromagnetic emission conforming to IEC 62311
environmental characteristics	Dustproof class 3S3 conforming to IEC 60721-3-3; Salt mist class 3C2 conforming to IEC 60721-3-3; Indoor use
Logistical informations
Country of origin	LV
Main
Range of product	PowerLogic
Product name	PowerTag A9 F63
Product or component type	Energy sensor
Poles	1P + N
Maximum current [Imax]	63 A
[Ib] Basic current	10 A
Starting current	40 mA
Saturation current	130 A
Product specific application	Cost allocation; Load monitoring; Circuit monitoring; Overload alarm; Energy management
Concentrator compatibility	EcoStruxure Panel Server Entry; EcoStruxure Panel Server Universal; EcoStruxure Panel Server Advanced; Harmony Hub; Wiser hub generation 2; Acti9 Smartlink SI B; Acti9 Smartlink SI D; Acti9 PowerTag Link; Acti9 PowerTag Link HD
Application	Buildings: breaker voltage monitoring; Buildings: cost allocation; Buildings: overload alarm
Range compatibility	Acti9 Acti9 iCV40; Acti9 Vigi iC40; Acti9 Vigi iC60; Acti9 Acti9 iDD40 XA; Acti9 Acti9 iCV40 XA; Acti9 Vigi iDT40; Acti9 iCVm40; Acti9 iCVr40; Acti9 iDDm40
Type of measurement	Active energy; Current; Voltage; Power factor; Active power
Accuracy class	Class 1 current conforming to IEC 61557-12; Class 0.5 voltage conforming to IEC 61557-12; Class 1 active power conforming to IEC 61557-12; Class 1 active energy conforming to IEC 61557-12; Class 1 power factor conforming to IEC 61557-12
Mounting location	Top or bottom
Mounting support	On circuit breaker
Product destination	Switchboard
Event management	Voltage loss with measured current at voltage loss
Transmission support medium	Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4
Emission power	10 mW
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.000 cm
Package 1 Width	6.000 cm
Package 1 Length	8.500 cm
Package 1 Weight	44.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	48
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	2.394 kg

The PowerTag Energy F63 1P+N is a wirelessly communicating energy meter. With its flexible design, it is suitable for 1P+N measuring points with a nominal power of 63A or less. The energy meter must be connected to a concentrator or a gateway. It is specifically designed for energy management, load monitoring and availability applications. It includes accurate real-time measurements of active energy, active power, current, voltage and power factor. With 2 quadrant energy measurement. In the event of a power failure, it sends a voltage loss alarm and the value of the current per phase before being switched off. PowerTag Energy 63A complies with the IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The accuracy class is Class 1. The Imax maximum current is 63A. The Ib base current is 10A. The saturation current is 130A and the actual inrush current is 40mA. The Un rated voltage is phase-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is less than or equal to 1VA. It can be installed either on the top or bottom of the protective device. The product color is white (RAL9003). The weight is 16 g. The protection class is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C.