Schneider Electric A9L40301, EAN: 3606480506352

Schneider Electric A9L40301 surge arrester 3p 350 V with remote

Energy > Surge Protection

Schneider Electric A9L40301 surge arrester 3p 350 V with remote

Lieske Part No. 1337898
Mfg Part No A9L40301
EAN-Code 3606480506352
Manufacturer Schneider Electric
Here only 319,20 EUR
379,85 EUR incl. VAT

Further information for Schneider Electric A9L40301 surge arrester 3p 350 V with remote

Additional features
Type of surge arrester classType 2
Surge arrester technologyMOV
[Ue] Rated operational voltage400 V AC (± 10 %) at 50/60 Hz
[In] rated surge currentCommon mode: 15 kA (L/PE); Common mode: 15 kA (N/PE)
[Imax] max. surge currentCommon mode: 40 kA L/PE
[Uc] Maximum continuous voltageCommon mode: 350 V L/PE
[Up] Protection levelCommon mode 1.6 kV Type 2 L/PE
[Ut] temporary overvoltage TOV337 V L/N 5 s withstand; 1200 V N/PE 200 ms safe failure mode
Max. mains-side overcurrent protectionAssociated disconnect switch iC60H 40 A curve C - Icu 15 kA; Associated disconnect switch iC60N 40 A curve C - Icu 10 kA; Associated disconnect switch NG125H 40 A curve C - Icu 36 kA; Associated disconnect switch NG125L 40 A curve C - Icu 50 kA; Associated disconnect switch NG125N 40 A curve C - Icu 25 kA; Connected fuse gG 63 A - Icu 15 kA; Connected fuse gG 80 A - Icu 50 kA
Signal circuit voltage0,25 A/250 V AC 50/60 Hz
Mounting modePlug-in (DIN rail)
9-mm pitch6
Height85 mm
Width54 mm
Depth69 mm
Product weight0,323 kg
ColourWhite (RAL 9003)
[Ipe] protective conductor current0,6 mA; 0,003 mA
Connections - terminalsTunnel terminals (bottom) 2.5…35 mm²; tunnel terminals (top) 2.5…35 mm²
[M] tightening torque2,5 Nm
Compatibility codeIPRD40r
Contractual warranty
Warranty (in months)18
Main features
Product seriesIPRD
Product categoryActi9
Product nameActi 9 iPRD
Product or component typeSurge arrester with plug-in module
Device short nameiPRD40r
Device applicationDistribution
StandardsEN 61643-11:2012; IEC 61643-11:2011
Product certificationsCE
Conformity markingNF; KEMA-KEUR
Pole description3P
Remote alarm contactWith
Signal contact composition1 SD (1 W)
Type of surge arresterElectrical distribution network
Earthing systemTN-C; IT 230
Mounting
Degree of protection (IK)IK03 corresponds to IEC 62262
Relative humidity5…95 %
Operating altitude2.000 m
Operating ambient temperature-25…60 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height7,5 cm
VPE 1 width6,5 cm
VPE 1 length9 cm
Packaging weight (Lbs)351 g
VPE 2 typeBB1
VPE 2 quantity4
VPE 2 height8,5 cm
VPE 2 width9,7 cm
VPE 2 length27,5 cm
VPE 2 weight1,471 kg
VPE 3 typeS03
VPE 3 quantity36
VPE 3 height30 cm
VPE 3 width30 cm
VPE 3 length40 cm
VPE 3 weight13,823 kg
The Acti 9 iPRD40r surge arrester from Schneider Electric is a plug-in protection module for electrical distribution networks. It belongs to the IPRD series within the Acti9 product range and provides protection against overvoltages in 3-pole installations. The device is designed for use in distribution systems and complies with standards EN 61643-11:2012 and IEC 61643-11:2011. It is equipped with a remote signalling contact that can monitor and signal the operating status of the arrester.

Applications

The iPRD40r is designed for use in electrical distribution networks, particularly in installations with TN-C and IT 230 earthing systems. It protects electrical equipment and installations against transient overvoltages caused by lightning strikes, switching operations, or other disturbance sources. The application is intended for indoor use, with an operating altitude up to 2,000 m above sea level. The operating ambient temperature ranges from -25 °C to 60 °C, while the storage temperature ranges from -40 °C to 85 °C.

Functions and Equipment in Detail

The device features an integrated remote signalling contact with a signal contact configuration of 1 SD (1 W), used for remote monitoring of the arrester’s status. The signal circuit voltage is 0.25 A/250 V AC at 50/60 Hz. The surge arrester is classified as Type 2, meaning it is suitable for installation close to the equipment to be protected and offers a high level of protection. The rated operating voltage is 400 V AC (± 10 %) at 50/60 Hz, with the maximum continuous voltage in common mode being 350 V L/PE.

Technology Explained Simply

The arrester operates using MOV technology (Metal-Oxide Varistor), which provides high performance during overvoltage events. The maximum discharge current (Imax) is 40 kA in common mode L/PE, while the nominal discharge current (In) is 15 kA. The protection level (Up) is 1.6 kV in common mode L/PE, ensuring effective shielding against overvoltages. The temporary overvoltage (TOV) is 337 V L/N for 5 seconds (withstand) and 1200 V N/PE for 200 ms (safe failure mode). The protective earth currents are 0.6 mA (L/PE) and 0.003 mA (N/PE).

Compatibility and Accessories

The iPRD40r is designed for mounting on a DIN rail and features a 9 mm pitch of 6. It is compatible with various disconnectors, including models iC60H, iC60N, NG125H, NG125L, and NG125N, each with 40 A and curve C. Additionally, gG fuses with 63 A (Icu 15 kA) or 80 A (Icu 50 kA) can be used. Suitable accessories include LS switches such as the iC60H 3p C 40A, iC60N 3p C 40A, and circuit breakers such as NG125L 3-pole C 40A, NG125N 3-pole C 40A, and NG125H 3-pole C 40A.

Mounting and Installation

Mounting is done by plugging onto a DIN rail. The connections consist of tunnel terminals at the top and bottom, suitable for cross-sections from 2.5 to 35 mm². The required tightening torque is 2.5 Nm. The dimensions of the device are 85 mm (height), 54 mm (width), and 69 mm (depth). The colour is white (RAL 9003). The degree of protection corresponds to IK03 according to IEC 62262, and the relative humidity is 5 to 95 %.

Advantages in Operation

The iPRD40r provides reliable protection due to its high discharge capacity and integrated remote signalling contact, enabling continuous monitoring. The plug-in design simplifies installation and maintenance, and compatibility with various switches and fuses increases operational flexibility. Compliance with standards EN 61643-11 and IEC 61643-11, along with certifications CE, NF, and KEMA-KEUR, ensures the safety and reliability of the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1337898
qrcode für Schneider Electric A9L40301 surge arrester 3p 350 V with remote