| Additional features |
| Type of surge arrester class | Type 2 + 3 |
| Surge arrester technology | MOV |
| Product application | Surge protection device iPRD F40r 3P; Surge protection device iPRD F40r 3P + N |
| Supplied accessories | Fuse (integrated) |
| Earthing system | TT; TN-S; TN-C |
| [Ue] Rated operational voltage | 240 V AC 50/60 Hz |
| [In] rated surge current | Differential operation: 20 kA (L/N) |
| [Imax] Maximum surge current | Differential operation: 40 kA L/N |
| [Uc] Maximum continuous voltage | Differential operation: 300 V L/N |
| [Up] Protection level | Differential operation 1.5 kV L/N |
| [Uoc] No-load voltage | 6000 V differential operation L/N |
| [Ut] temporary overvoltage TOV | 337 V L/N 5 s withstand; 442 V L/N 120 min safe failure mode |
| Short-circuit withstand capability | 50 kA |
| Local signalling | Operating status: indicator bit (green); Fault indication: indicator bit (red) |
| Mounting mode | Plug-in |
| Mounting bracket | into the SPD module |
| 9-mm pitch | 2 |
| Height | 45 mm |
| Width | 18 mm |
| Depth | 57,2 mm |
| Product weight | 69 g |
| Colour | White (RAL 9003) |
| Material | Thermoplastic |
| [tA] Response time | < 25 ns |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product category | Acti9 |
| Product or component type | Cartridge |
| Device short name | iPRD F40r |
| Compatible product family | Acti9 iPRD F40r |
| Type of surge arrester | Electrical distribution network |
| Standards | IEC 61643-11:2011; EN 61643-11:2012; EN 61643-11:2018/A11 |
| Product certifications | CE |
| Mounting |
| Degree of protection (IP) | IP20 |
| Relative humidity | 5…95 % |
| Operating altitude | 0 - 4000 m |
| Ambient temperature during storage | -40…85 °C |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 3,200 cm |
| VPE 1 width | 8,800 cm |
| VPE 1 length | 5,800 cm |
| Packaging weight (Lbs) | 78,000 g |
| VPE 2 type | S02 |
| VPE 2 quantity | 24 |
| VPE 2 height | 15,000 cm |
| VPE 2 width | 30,000 cm |
| VPE 2 length | 40,000 cm |
| VPE 2 weight | 2,378 kg |
| VPE 3 type | P12 |
| VPE 3 quantity | 768 |
| VPE 3 height | 75,000 cm |
| VPE 3 width | 80,000 cm |
| VPE 3 length | 120,000 cm |
| VPE 3 weight | 88,128 kg |
Ersatzschutzmodul für Überspannungsableiter iPRD F40r 3P/3P+N. geeignet für A9L2F340 (L-PE) und A9L2F640 (L-N). mit integrierter Sicherung. Optische Statusanzeige des Ableiters (grün OK/ rot Gerät defekt). U0-Nennspannung 240 V AC (50/60Hz). Uc -höchste Dauerspannung 300 VAC. In-Nennableitstossstrom 20 kA. Imax -maximaler Ableitstossstrom 40 kA. Uoc-Leerlaufspannung 6kV. Up-Schutzpegel 1,5 kV. Abmessung (B) 18mm x (H) 45mm x (T) 57.2mm. Gewicht 69g. Schutzart IP20 integriert. Betriebstemperatur -40 bis +85 Grad Celsius. Entspricht IEC 61643-11:2011, EN 61643-11:2012+A11:2018.