Additional features
Type of surge arrester class	Type 1 + 2
Surge arrester technology	MOV + GDT
[Ue] Rated operational voltage	230/400 V AC at 50/60 Hz
[In] rated surge current	Differential: 25 kA (L/N); Common mode: 100 kA (N/PE)
[Imax] max. surge current	Differential operation: 65 kA L/N; Common mode: 130 kA N/PE
[Iimp] lightning impulse current	Differential mode: 25 kA L/N 12.5 A.s; Common mode: 100 kA N/PE 50 A.s
[Uc] Maximum continuous voltage	Differential mode: 300 V L/N; Common mode: 305 V N/PE
[Up] Protection level	Differential mode 1.5 kV L/N; Common mode 1.5 kV N/PE
[Ut] temporary overvoltage TOV	442 V L/N 120 min withstand; 1200 V N/PE 200 ms withstand
[Ifi] follow current	100 A N/PE
[Isccr] Short-circuit withstand capability	50 kA
Max. mains-side overcurrent protection	Connected fuse gG 315 A
Local signalling	Operating status: indicator bit (green); Fault indication: indicator bit (red)
Signal circuit voltage	1 A/250 V AC; 1 A/125 V AC; 0,5 A/48 V DC; 0,5 A/24 V DC; 0,5 A/12 V DC
Mounting mode	Plug-in (DIN rail)
9-mm pitch	16
Height	110,5 mm
Width	144 mm
Depth	86 mm
Product weight	1,074 kg
Quantity per set	Set of 1 piece
Colour	White (RAL 9003)
Material	Thermoplastic
[tA] Response time	< 100 ns L/N; < 100 ns N/PE
Cable cross-section	0.25…1.5 mm² solid cable for remote control; 6…35 mm² robust stranded cable for power connections; 6…25 mm² flexible cable for power connections; 16…35 mm² robust stranded cable for grounding terminal; 16…25 mm² flexible cable for grounding terminal
Wire stripping length	Remote control: 10 mm; power connections: 18 mm; grounding terminal: 18 mm
[M] tightening torque	Circuit: 4.5 Nm
Surge current	25 kA
Possible country of use	Germany
Contractual warranty
Warranty (in months)	18
Main features
Product series	IPRD1
Product category	Acti9
Product name	Acti9 iPRD1
Product or component type	Surge arrester with plug-in module
Device short name	iPRD1 25r
Device application	Distribution
Standards	IEC 61643-11:2011; EN 61643-11:2012; EN 61643-11:2018/A11
Product certifications	CE
Conformity marking	VDE
Pole description	3P + N
Remote alarm contact	With
Type of surge arrester	Electrical distribution network
Earthing system	TT; TN-S
Mounting
Degree of protection (IP)	IP20 with inserted protection modules and built-in/wired
Degree of protection (IK)	IK05
Relative humidity	5…95 %
Operating altitude	0 - 4000 m
Operating ambient temperature	-40…85 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	12,800 cm
VPE 1 width	17,300 cm
VPE 1 length	13,400 cm
Packaging weight (Lbs)	1,212 kg
VPE 2 type	S03
VPE 2 quantity	8
VPE 2 height	30,000 cm
VPE 2 width	30,000 cm
VPE 2 length	40,000 cm
VPE 2 weight	10,172 kg
VPE 3 type	P12
VPE 3 quantity	128
VPE 3 height	75,000 cm
VPE 3 width	80,000 cm
VPE 3 length	120,000 cm
VPE 3 weight	176,240 kg

Acti9 iPRD1 25r modularer Kombiableiter zum Einsatz bei Blitzschutzklasse I+II. max. netzseitiger Überstromschutz 315A gG. Fernmeldekontakt. Optische Funktions - / Defektanzeige des Ableiters (grün OK/ rot Gerät defekt). Geeignet für TN-S und TT Netze. U0-Nennspannung 240 V AC (50/60Hz). Uc -höchste Dauerspannung 305V AC (N-PE) / 300V AC (L-N). In-Nennableitstossstrom 25/100 kA (L-N)/(N-PE). Imax -maximaler Ableitstossstrom 65/130 kA (L-N)/(N-PE). Iimp 25/100kA (L-N/N-PE). Up-Schutzpegel 1,5 kV (L-N/N-PE). DIN-Hutschienenmontage. Abmessung (B) 144mm x (H) 110.5mm x (T) 86mm. Gewicht 1.074kg. Schutzart IP20 integriert. Betriebstemperatur -40 bis +85 Grad Celsius. Entspricht IEC 61643-11:2011, EN 61643-11:2012+A11:2018.