Complementary
Surge arrester class type	Type 1 + 2
Surge arrester technology	GDT
[Ue] rated operational voltage	230/400 V AC at 50/60 Hz
Nominal discharge current	Differential mode: 25 kA (L/N); Common mode: 100 kA (N/PE)
Maximum discharge current	Differential mode: 65 kA L/N; Common mode: 150 kA N/PE
[Iimp] impulse current	Differential mode: 25 kA L/N 12.5 A.s; Common mode: 100 kA N/PE 50 A.s
[Uc] maximum continuous operating voltage	Differential mode: 275 V L/N; Common mode: 305 V N/PE
Maximum [Up] voltage protection level	Differential mode 1.5 kV L/N; Common mode 1.5 kV N/PE
[Ut] temporary overvoltage	442 V L/N 120 min withstand; 1200 V N/PE 200 ms withstand
[Ifi] follow current	75 kA differential mode L/N; 100 A common mode N/PE
Short-circuit withstand	75 kA
Disconnector device type	Integrated fuse
Local signalling	Operating state: flag (green); Fault indication: flag (red)
Signalling circuit voltage	1 A/250 V AC; 1 A/125 V AC; 0.5 A/48 V DC; 0.5 A/24 V DC; 0.5 A/12 V DC
Mounting mode	Clip-on (DIN rail)
9 mm pitches	14
Height	105 mm
Width	126 mm
Depth	86 mm
Net weight	1.187 kg
Quantity per set	Set of 1
Colour	White (RAL 9003)
Material	Thermoplastic
Response time	< 100 ns L/N; < 100 ns N/PE
Cable cross section	0.25…1.5 mm² solid cable for remote control; 6…35 mm² solid stranded cable for power terminals; 6…25 mm² flexible cable for power terminals; 16…35 mm² solid stranded cable for earthing terminal; 16…25 mm² flexible cable for earthing terminal
Wire stripping length	Remote control: 10 mm; Power terminals: 18 mm; Earthing terminal: 18 mm
Tightening torque	Power circuit: 4.5 N.m
Impulse current	25 kA
Targeted country	Germany
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20 with cartridges fitted and device wired
IK degree of protection	IK05
Relative humidity	5…95 %
Operating altitude	0...2000 m
Ambient air temperature for operation	-40…85 °C
Logistical informations
Country of origin	SI
Main
Range of product	IPRD1
Product name	Acti9 iPRD1
Product or component type	Surge arrester with pluggable cartridge
Device short name	iPRD1 F25r
Device application	Distribution
Standards	IEC 61643-11:2011; EN 61643-11:2012; EN 61643-11:2018/A11
Product certifications	CE
Quality labels	VDE
Poles description	3P + N
Remote signalling	With
Surge arrester type	Electrical distribution network
Earthing system	TT; TN-S
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	12.600 cm
Package 1 Width	13.500 cm
Package 1 Length	17.400 cm
Package 1 Weight	1.372 kg
Unit Type of Package 2	S03
Number of Units in Package 2	8
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	11.570 kg
Unit Type of Package 3	P12
Number of Units in Package 3	128
Package 3 Height	75.000 cm
Package 3 Width	80.000 cm
Package 3 Length	120.000 cm
Package 3 Weight	200.120 kg

Acti9 iPRD1 F25r modularer Kombiableiter zum Einsatz bei Blitzschutzklasse I+II. integrierte Sicherung im Gerät, keine Ableitervorsicherung notwendig (vorsicherungsfrei). Fernmeldekontakt. Optische Funktions - / Defektanzeige des Ableiters und der integrierten Sicherung (grün OK/ rot Gerät defekt). Geeignet für TN-S und TT Netze. U0-Nennspannung 240 V AC (50/60Hz). Uc -höchste Dauerspannung 305V AC (N-PE) / 255V AC (L-N). In-Nennableitstossstrom 25/100 kA (L-N)/(N-PE). Imax -maximaler Ableitstossstrom 65/150 kA (L-N)/(N-PE). Iimp 25/100kA (L-N/N-PE). Up-Schutzpegel 1,5 kV (L-N/N-PE). DIN-Hutschienenmontage. Abmessung (B) 126mm x (H) 105mm x (T) 86mm. Gewicht 1.187kg. Schutzart IP20 integriert. Betriebstemperatur -40 bis +85 Grad Celsius. Entspricht IEC 61643-11:2011, EN 61643-11:2012+A11:2018.