Complementary
Surge arrester class type	Type 2 + 3
Surge arrester technology	MOV
[Ue] rated operational voltage	400 V AC (+/- 10 %) at 50/60 Hz
Nominal discharge current	Common mode: 2 kA (L/PE); Differential mode: 2 kA (L/N)
Maximum discharge current	Common mode: 8 kA L/PE
[Uoc] open circuit voltage	10 kV type 3 common mode L/PE
[Uc] maximum continuous operating voltage	Common mode: 350 V L/PE
Maximum [Up] voltage protection level	Common mode 1.4 kV type 3 L/PE; Common mode 1.2 kV type 2 L/PE
Disconnector device type	Integrated circuit breaker - Icu 25 kA
Signalling circuit voltage	2 A/250 V AC 50/60 Hz
Mounting mode	Clip-on (DIN rail)
9 mm pitches	12.7
Height	94 mm
Width	113.6 mm
Depth	75.9 mm
Net weight	0.67 kg
Colour	White (RAL 9003)
Connections - terminals	Tunnel type terminal (downside) 2.5…25 mm²; Tunnel type terminal (upside) 2.5…25 mm²
Tightening torque	2.5 N.m
Compatibility code	IQuick PRD8r
Contractual warranty
Warranty (in months)	18
Environment
IK degree of protection	IK05 conforming to IEC 62262
Relative humidity	5…95 %
Operating altitude	2000 m
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…70 °C
Main
Range of product	IQuick PRD
Product name	Acti9 iQuick PRD
Product or component type	Surge arrester with pluggable cartridge
Device short name	iQuick PRD8r
Device application	Distribution
Standards	EN 61643-11:2012; IEC 61643-11:2011
Product certifications	CE
Quality labels	NF; KEMA-KEUR
Poles description	3P
Remote signalling	With
Signal contacts composition	1 SD (1 C/O)
Surge arrester type	Electrical distribution network
Earthing system	TN-C; IT 230
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	9.200 cm
Package 1 Width	10.000 cm
Package 1 Length	14.800 cm
Package 1 Weight	734.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	12
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	9.229 kg

Surge arrester Acti 9 iQuick PRD8r, plug-in protection modules. 3-pole, maximum discharge current 8kA, type 3. Surge arresters iQuick PRD type 2 are used to protect low-voltage consumer systems and equipment against transient overvoltages. Arresters type 3 are used to protect end users. With integrated backup fuse.