Complementary
Surge arrester class type	Type 2
Surge arrester technology	MOV + GDT
[Ue] rated operational voltage	230 V AC (+/- 10 %) at 50/60 Hz
Nominal discharge current	Common mode: 5 kA (L/PE); Common mode: 5 kA (N/PE); Differential mode: 5 kA (L/N)
Maximum discharge current	Common mode: 20 kA L/PE; Common mode: 20 kA N/PE; Differential mode: 20 kA L/N
[Uc] maximum continuous operating voltage	Common mode: 264 V N/PE; Differential mode: 350 V L/N
Maximum [Up] voltage protection level	Common mode 1.7 kV type 2 N/PE; Differential mode 1.7 kV type 2 L/N
[Ut] temporary overvoltage	1200 V N/PE 200 ms withstand; 415 V L/N 5 s withstand; 440 V L/N 7200 s safe failure mode
Short-circuit withstand	25 kA
Disconnector device type	Integrated circuit breaker - Icu 25 kA
Signalling circuit voltage	2 A/250 V AC 50/60 Hz
Mounting mode	Clip-on (DIN rail)
9 mm pitches	8
Height	91.4 mm
Width	72 mm
Depth	75.9 mm
Net weight	435 g
Colour	White (RAL 9003)
[Ipe] Ground residual current	1 mA
Connections - terminals	Tunnel type terminal (L/N) 2.5…25 mm² rigid; Tunnel type terminal (ground) 2.5…25 mm² rigid; Tunnel type terminal (L/N) 2.5…25 mm² flexible; Tunnel type terminal (ground) 2.5…25 mm² flexible; Tunnel type terminal (L/N) 2.5…35 mm² flexible with ferrule; Tunnel type terminal (ground) 2.5…25 mm² flexible with ferrule
Wire stripping length	11 mm
Tightening torque	2.5 N.m
Compatibility code	IQuick PRD20r
Contractual warranty
Warranty (in months)	18
Environment
IK degree of protection	IK05 conforming to IEC 62262
Relative humidity	5…95 %
Operating altitude	2000 m
Ambient air temperature for operation	-25…60 °C
Ambient air temperature for storage	-40…80 °C
Logistical informations
Country of origin	HU
Main
Range of product	IQuick PRD
Product name	Acti9 iQuick PRD
Product or component type	Surge arrester with pluggable cartridge
Device short name	iQuick PRD20r
Device application	Distribution
Standards	EN 61643-11:2012; IEC 61643-11:2011
Product certifications	CE
Quality labels	NF; KEMA-KEUR
Poles description	1P + N
Remote signalling	With
Signal contacts composition	1 SD (1 C/O)
Surge arrester type	Electrical distribution network
Earthing system	TT; TN-S
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	9.000 cm
Package 1 Width	9.000 cm
Package 1 Length	10.000 cm
Package 1 Weight	489.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	27
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	13.433 kg

Surge arrester Acti 9 iQuick PRD20r, plug-in protection modules. 1-pole+N, maximum discharge current 20kA, type 2. Surge arresters iQuick PRD type 2 are used to protect low-voltage consumer systems and equipment against transient overvoltages. Arresters type 3 are used to protect end users. With integrated backup fuse.