Additional features
Type of surge arrester class	Type 2
Surge arrester technology	MOV
[Ue] Rated operational voltage	400 V AC (± 10 %) at 50/60 Hz
[In] rated surge current	Common mode: 20 kA (L/PE); Differential mode: 20 kA (L/N)
[Imax] max. surge current	Common mode: 40 kA L/PE
[Uc] Maximum continuous voltage	Common mode: 350 V L/PE
[Up] Protection level	Common mode 2 kV Type 2 L/PE
Max. mains-side overcurrent protection	Integrated circuit breaker - Icu 20 kA
Signal circuit voltage	2 A/250 V AC 50/60 Hz
Mounting mode	Plug-in (DIN rail)
9-mm pitch	12,7
Height	94 mm
Width	113,6 mm
Depth	75,9 mm
Product weight	0,69 kg
Colour	White (RAL 9003)
Connections - terminals	Tunnel terminals (top) 2.5…35 mm²; Tunnel terminals (bottom) 2.5…25 mm²
[M] tightening torque	2,5 Nm
Compatibility code	IQuick PRD40r
Contractual warranty
Warranty (in months)	18
Main features
Product series	IQuick PRD
Product category	Acti9
Product name	Acti 9 iQuick PRD
Product or component type	Surge arrester with plug-in module
Device short name	iQuick PRD40r
Device application	Distribution
Standards	EN 61643-11:2012; IEC 61643-11:2011
Product certifications	CE
Conformity marking	KEMA-KEUR; NF
Pole description	3P
Remote alarm contact	With
Signal contact composition	1 SD (1 W)
Type of surge arrester	Electrical distribution network
Earthing system	TN-C; IT 230
Mounting
Degree of protection (IK)	IK05 in accordance with IEC 62262
Relative humidity	5…95 %
Operating altitude	2.000 m
Operating ambient temperature	-25…60 °C
Ambient temperature during storage	-40…70 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	10,000 cm
VPE 1 width	9,000 cm
VPE 1 length	15,000 cm
Packaging weight (Lbs)	753,000 g
VPE 2 type	S03
VPE 2 quantity	12
VPE 2 height	30,000 cm
VPE 2 width	30,000 cm
VPE 2 length	40,000 cm
VPE 2 weight	9,488 kg

Surge arrester Acti 9 iQuick PRD40r, plug-in protection modules. 3-pole, maximum discharge current 40kA, type 2. Surge arresters iQuick PRD type 2 are used to protect low-voltage consumer systems and equipment against transient overvoltages. Arresters type 3 are used to protect end users. With integrated backup fuse.