| Complementary |
| Surge arrester class type | Type 2 + 3 |
| Surge arrester technology | MOV + GDT |
| [Ue] rated operational voltage | 230/400 V AC (+/- 10 %) at 50/60 Hz |
| Nominal discharge current | Common mode: 2.5 kA (L/PE); Common mode: 2.5 kA (N/PE); Differential mode: 2.5 kA (L/N) |
| Maximum discharge current | Common mode: 8 kA L/PE; Common mode: 8 kA N/PE; Differential mode: 8 kA L/N |
| [Uoc] open circuit voltage | 10 kV type 3 common mode N/PE; 10 kV type 3 differential mode L/N |
| [Uc] maximum continuous operating voltage | Common mode: 260 V N/PE; Common mode: 350 V L/PE; Differential mode: 350 V L/N |
| Maximum [Up] voltage protection level | Common mode 1.1 kV type 3 N/PE; Differential mode 1 kV type 2 L/N; Differential mode 1.1 kV type 3 L/N; Common mode 1.4 kV type 2 N/PE |
| [Ut] temporary overvoltage | 337 V L/N 5 s withstand; 1200 V N/PE 200 ms safe failure mode; 442 V L/PE 5 s withstand |
| Disconnector device type | Associated circuit breaker iC60L 10 A curve C - Icu 25 kA; Associated circuit breaker IC60N 10 A curve C - Icu 10 kA; Associated circuit breaker iC60H 10 A curve C - Icu 15 kA; Associated fuse gG 25 A - Icu 15 kA; Associated fuse gG 80 A - Icu 50 kA |
| Signalling circuit voltage | 0.25 A/250 V AC 50/60 Hz |
| Mounting mode | Clip-on (DIN rail) |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 69 mm |
| Net weight | 0.421 kg |
| Colour | White (RAL 9003) |
| [Ipe] Ground residual current | 0.6 mA; 0.003 mA |
| Connections - terminals | Tunnel type terminal (downside) 2.5…35 mm²; Tunnel type terminal (upside) 2.5…35 mm² |
| Tightening torque | 2.5 N.m |
| Compatibility code | IPRD8r |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IK degree of protection | IK03 conforming to IEC 62262 |
| Relative humidity | 5…95 % |
| Operating altitude | 2000 m |
| Ambient air temperature for operation | -25…60 °C |
| Ambient air temperature for storage | -40…85 °C |
| Logistical informations |
| Country of origin | CN |
| Main |
| Range of product | IPRD |
| Product name | Acti9 iPRD |
| Product or component type | Surge arrester with pluggable cartridge |
| Device short name | iPRD8r |
| Device application | Distribution |
| Standards | EN 61643-11:2012; IEC 61643-11:2011 |
| Product certifications | CE |
| Quality labels | NF; KEMA-KEUR |
| Poles description | 3P + N |
| Remote signalling | With |
| Signal contacts composition | 1 SD (1 C/O) |
| Surge arrester type | Electrical distribution network |
| Earthing system | TN-S; TT |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.7 cm |
| Package 1 Width | 8.1 cm |
| Package 1 Length | 9.2 cm |
| Package 1 Weight | 455 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 3 |
| Package 2 Height | 8.3 cm |
| Package 2 Width | 10.2 cm |
| Package 2 Length | 27.7 cm |
| Package 2 Weight | 1.433 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 27 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 13.359 kg |
Surge arrester Acti 9 iPRD8r, plug-in protection modules. 3-pole+N, 8kA secondary protection, type 3. Is installed near the loads to be protected if they are more than 10 m away from the previously installed surge arrester. Surge arresters with index R in the type designation are equipped with remote signaling contacts.