Schneider Electric A9L08500, EAN: 3606480506574

Schneider Electric A9L08500 surge arrester 1p+N 350V

Energy > Surge Protection

Schneider Electric A9L08500 surge arrester 1p+N 350V

Lieske Part No. 1337895
Mfg Part No A9L08500
EAN-Code 3606480506574
Manufacturer Schneider Electric
Here only 193,80 EUR
230,62 EUR incl. VAT

Further information for Schneider Electric A9L08500 surge arrester 1p+N 350V

Complementary
Surge arrester class typeType 2 + 3
Surge arrester technologyMOV + GDT
[Ue] rated operational voltage230 V AC (+/- 10 %) at 50/60 Hz
Nominal discharge currentCommon mode: 2.5 kA (L/PE); Common mode: 2.5 kA (N/PE); Differential mode: 2.5 kA (L/N)
Maximum discharge currentCommon mode: 8 kA L/PE; Common mode: 8 kA N/PE; Differential mode: 8 kA L/N
[Uoc] open circuit voltage10 kV type 3 common mode N/PE; 10 kV type 3 differential mode L/N
[Uc] maximum continuous operating voltageCommon mode: 260 V N/PE; Common mode: 350 V L/PE; Differential mode: 350 V L/N
Maximum [Up] voltage protection levelCommon mode 1.1 kV type 3 N/PE; Differential mode 1 kV type 2 L/N; Differential mode 1.1 kV type 3 L/N; Common mode 1.4 kV type 2 N/PE
[Ut] temporary overvoltage337 V L/N 5 s withstand; 1200 V N/PE 200 ms safe failure mode; 442 V L/PE 5 s withstand
Disconnector device typeAssociated circuit breaker iC60L 10 A curve C - Icu 25 kA; Associated circuit breaker IC60N 10 A curve C - Icu 10 kA; Associated circuit breaker iC60H 10 A curve C - Icu 15 kA; Associated fuse gG 25 A - Icu 15 kA; Associated fuse gG 80 A - Icu 50 kA
Mounting modeClip-on (DIN rail)
9 mm pitches4
Height85 mm
Width36 mm
Depth69 mm
Net weight0.211 kg
ColourWhite (RAL 9003)
[Ipe] Ground residual current0.6 mA; 0.003 mA
Connections - terminalsTunnel type terminal (downside) 2.5…35 mm²; Tunnel type terminal (upside) 2.5…35 mm²
Tightening torque2.5 N.m
Compatibility codeIPRD8
Contractual warranty
Warranty (in months)18
Environment
IK degree of protectionIK03 conforming to IEC 62262
Relative humidity5…95 %
Operating altitude2000 m
Ambient air temperature for operation-25…60 °C
Ambient air temperature for storage-40…85 °C
Logistical informations
Country of originCN
Main
Range of productIPRD
Product nameActi9 iPRD
Product or component typeSurge arrester with pluggable cartridge
Device short nameiPRD8
Device applicationDistribution
StandardsEN 61643-11:2012; IEC 61643-11:2011
Product certificationsCE
Quality labelsKEMA-KEUR; NF
Poles description1P + N
Remote signallingWithout
Surge arrester typeElectrical distribution network
Earthing systemTN-S; TT
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.2 cm
Package 1 Width7.5 cm
Package 1 Length9 cm
Package 1 Weight236 g
Unit Type of Package 2BB1
Number of Units in Package 26
Package 2 Height8.5 cm
Package 2 Width10 cm
Package 2 Length28 cm
Package 2 Weight1.477 kg
Unit Type of Package 3S03
Number of Units in Package 354
Package 3 Height30 cm
Package 3 Width30 cm
Package 3 Length40 cm
Package 3 Weight13.831 kg
The Acti 9 iPRD8 surge arrester from Schneider Electric is a plug-in protection module for electrical distribution networks. It serves as secondary protection and is installed close to sensitive consumers when these are more than 10 meters away from the primary surge protection. The device is part of the IPRD series and belongs to the Acti9 product range. It is designed for use in distribution systems and complies with standards EN 61643-11:2012 and IEC 61643-11:2011. Certifications CE, KEMA-KEUR, and NF confirm compliance with applicable safety and quality requirements.

Applications
The iPRD8 is designed for use in electrical distribution networks, particularly in buildings with sensitive electronic equipment. It protects against transient overvoltages caused by lightning strikes or network switching operations. Installation takes place close to the loads to be protected, minimizing the cable length between primary and secondary protection. This is especially important when the distance to the previous surge arrester exceeds 10 meters, to ensure the effectiveness of protection.

Functions and Equipment in Detail
The device is configured as 1P + N and provides a protection level of 1.1 kV in common-mode operation (N/PE, Type 3) and 1 kV in differential mode (L/N, Type 2). The maximum discharge current is 8 kA in common-mode (L/PE and N/PE) and in differential mode (L/N). The rated operating voltage is 230 V AC (±10 %) at 50/60 Hz. The maximum continuous voltage is 350 V in differential mode (L/N) and 350 V in common-mode (L/PE), as well as 260 V in common-mode (N/PE). The open-circuit voltage is 10 kV in Type 3 common-mode (N/PE) and 10 kV in differential mode (L/N). The temporary overvoltage (TOV) is 337 V L/N for 5 seconds (withstand) and 1200 V N/PE for 200 ms (safe failure mode).

Technology Explained Simply
The surge arrester is based on MOV + GDT technology (Metal-Oxide Varistor and Gas Discharge Tube), enabling efficient overvoltage diversion. MOV technology reacts quickly to voltage spikes, while GDT handles higher energy loads. The device is suitable for TN-S and TT earthing systems. It features tunnel terminals at the top and bottom for cross-sections from 2.5 to 35 mm². The tightening torque is 2.5 Nm. Protective conductor currents are 0.6 mA (L/PE) and 0.003 mA (N/PE). The device is plug-in mounted on DIN rail and conforms to the 9 mm pitch with a height of 85 mm, width of 36 mm, and depth of 69 mm. The color is white (RAL 9003).

Compatibility and Accessories
The iPRD8 is compatible with various disconnectors from the iC60 series, such as the iC60L 10 A Curve C (Icu 25 kA), iC60N 10 A Curve C (Icu 10 kA), and iC60H 10 A Curve C (Icu 15 kA). Fuses gG with 25 A (Icu 15 kA) and 80 A (Icu 50 kA) can also be used. Suitable accessories include the iC60L 2p C 10A LS switch, the iC60H 1p+N C 10A LS switch, the STI 1p+N 25A fuse disconnector for 10.3x38 mm, and the iC60N 1p+N C 10A LS switch.

Mounting and Installation
Mounting is done on DIN rail, with the device being plug-in. The protection rating is IK03 according to IEC 62262. The operating ambient temperature ranges from -25 °C to 60 °C, and the storage temperature ranges from -40 °C to 85 °C. Relative humidity is 5 to 95 %. The operating altitude is limited to 2,000 m.

Advantages in Operation
The iPRD8 provides reliable secondary protection for sensitive electronic equipment. The plug-in design enables flexible installation and maintenance. The combination of MOV and GDT ensures efficient overvoltage diversion. Compatibility with various disconnectors and fuses facilitates integration into existing distribution systems. Clear pole identification (1P + N) and distinct connection terminals support safe installation. The device is suitable for TN-S and TT earthing systems, enabling broad applicability in various electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1337895
qrcode für Schneider Electric A9L08500 surge arrester 1p+N 350V