Schneider Electric A9F92372, EAN: 3606480085475

Schneider Electric A9F92372 circuit breaker 3p

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9F92372 circuit breaker 3p

Lieske Part No. 931248
Mfg Part No A9F92372
EAN-Code 3606480085475
Manufacturer Schneider Electric
Here only 763,80 EUR
908,92 EUR incl. VAT

Further information for Schneider Electric A9F92372 circuit breaker 3p

Additional features
Network frequency50/60 Hz
[Ue] Operational rated voltage12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold3 x In +/- 20 %
Breaking capacity100 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 100 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 100 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 70 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at
Rated switching-off capacity Ics100 kA 100 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 100 kA 100 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 100 kA 100 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 70 kA 100 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 20 kA 100 % x Icu at
Limiting class3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand6 kV corresponds to EN/IEC 60947-2
Control typeToggle switch
Local signallingtrip indicator
Mounting modePlug-on; Removable comb rail installed
Mounting bracket35 mm DIN rail
Compatibility of comb rails and distribution blocksTop or bottom: yes
Terminal pitch18 mm between phases
9-mm pitch6
Height85 mm
Width54 mm
Depth78,5 mm
Product weight0,375 kg
ColourWhite
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Connections - terminalsSingle terminal (top or bottom), for 1 cable(s), 1…25 mm², rigid, copper; Single terminal (top or bottom), for 1 cable(s), 1…16 mm², flexible, copper; Single terminal (top or bottom), for 1 cable(s), 1…16 mm², flexible with ferrule, copper; Single terminal (top or bottom), for 1.0 cable(s), flexible, copper or aluminium, with ring terminal and accessory
Wire stripping length14 mm for top or bottom connection
[M] tightening torque2 Nm top or bottom
Earth fault protectionSeparate block
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iC60
Product or component typeMiniature circuit breaker (MCB)
Device short nameiC60L
Device applicationDistribution
Pole description3P
Number of protected poles3
[In] Rated current1,6 A
Type of networkDC; AC
Trigger technologyThermal-magnetic
Cam discZ
Product compatibilityVigi iC60 single terminal add-on residual current device 25/40/63 A; Quick Vigi iC60 single terminal add-on residual current device 25/40 A
Application categoryCategory A corresponds to EN/IEC 60947-2
Suitability for insulationYes, complies with EN/IEC 60947-2; Yes, complies with EN/IEC 60898-1
StandardsEN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree3 corresponds to EN/IEC 60947-2
Over voltage categoryIV
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating altitude0 - 2.000 m
Operating ambient temperature-35…70 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height7,500 cm
VPE 1 width5,400 cm
VPE 1 length9,400 cm
Packaging weight (Lbs)339,000 g
VPE 2 typeBB1
VPE 2 quantity4
VPE 2 height8,000 cm
VPE 2 width10,000 cm
VPE 2 length22,000 cm
VPE 2 weight1,408 kg
VPE 3 typeS02
VPE 3 quantity16
VPE 3 height15,000 cm
VPE 3 width30,000 cm
VPE 3 length40,000 cm
VPE 3 weight5,892 kg
Circuit breaker Acti 9 iC60L, 15kA (IEC/EN 60898-1), 100kA (IEC/EN 60947-2). 3-pole, nominal current 1.6A, Z characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Double connection terminal for cable and pin comb bar on the top and bottom of the device. Snap action for low-wear switching of the contacts. Insulation cover that moves with the device. Operation of the top hat rail fastening element on the front of the device for tool-free installation and easy access for the user. With mechanical front-side fault indication display (VisiTrip) to indicate trips due to overload or short circuit. Safe contact display (VisiSafe) of the circuit breaker, with a green display it is certain that there is no voltage on the outgoing side. Terminals IP20, moving insulation cover. Single connection terminal from above or below. Easy removal of the individual device when the phase rail is installed, thanks to the fastening element accessible from the front. Can be combined with the residual current circuit breakers of the Acti 9 iID series, as well as the FI Block Vigi iC60. Additional auxiliary modules that can be connected in series (optional) - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. Color RAL 9003. The iC60L circuit breaker meets the following standards - IEC/EN 60898-1 (up to 40A) and IEC/EN 60947-2. This series is also VDE certified!
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/931248
qrcode für Schneider Electric A9F92372 circuit breaker 3p