Additional features
Network frequency	50/60 Hz
[Ue] Operational rated voltage	12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold	8 x inch +/-20 %
Breaking capacity	42 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 30 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 15 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 15 kA Icu at
Rated switching-off capacity Ics	21 kA 50 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 50 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 50 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 5 kA 50 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 100 % x Icu at
Limiting class	3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage	500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand	6 kV corresponds to EN/IEC 60947-2
Control type	Toggle switch
Local signalling	trip indicator
Mounting mode	Plug-on; Removable comb rail installed
Mounting bracket	35 mm DIN rail
Terminal pitch	18 mm between phases
9-mm pitch	6
Height	91 mm
Width	54 mm
Depth	78,5 mm
Product weight	0,375 kg
Colour	White
Mechanical life	20000 cycles
Electrical lifetime	10000 cycles
Connections - terminals	Double terminal (top or bottom), for 1 cable(s), 1…25 mm², solid, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded with ferrule, copper; Double terminal (top or bottom), for 1.0 cable(s), stranded, copper or aluminium, with ring terminal and accessory
Wire stripping length	14 mm for top or bottom connection
[M] tightening torque	2 Nm top or bottom
Earth fault protection	Separate block
Contact position indicator
Contractual warranty
Warranty (in months)	18
Main features
Product series	Acti9
Product name	Acti9 iC60
Product or component type	Miniature circuit breaker (MCB)
Device short name	iC60H
Device application	Distribution
Pole description	3P
Number of protected poles	3
[In] Rated current	20 A
Type of network	DC; AC
Trigger technology	Thermal-magnetic
Cam disc	C
Product compatibility	Vigi iC60 double terminal add-on residual current device 25/63 A
Application category	Category A corresponds to EN/IEC 60947-2
Suitability for insulation	Yes, complies with EN/IEC 60947-2; Yes, complies with EN/IEC 60898-1
Standards	EN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)	IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree	3 corresponds to EN/IEC 60947-2
Over voltage category	IV
Drip-proof	2 corresponds to IEC 60068-1
Relative humidity	95 % at 55 °C
Operating ambient temperature	-35…70 °C
Ambient temperature during storage	-40…85 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	5,300 cm
VPE 1 width	7,200 cm
VPE 1 length	9,000 cm
Packaging weight (Lbs)	352,000 g
VPE 2 type	BB1
VPE 2 quantity	4
VPE 2 height	8,700 cm
VPE 2 width	9,900 cm
VPE 2 length	22,100 cm
VPE 2 weight	1,470 kg
VPE 3 type	S03
VPE 3 quantity	44
VPE 3 height	30,000 cm
VPE 3 width	30,000 cm
VPE 3 length	40,000 cm
VPE 3 weight	16,680 kg

Circuit breaker Acti 9 iC60H, 10kA (IEC/EN 60898-1), 15kA (IEC/EN 60947-2). 3-pole, nominal current 20A, C characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Double connection terminal for cable and pin comb bar on the top and bottom of the device. Snap action for low-wear switching of the contacts. Insulation cover that moves with the device. Operation of the top hat rail fastening element on the front of the device for tool-free installation and easy access for the user. With mechanical front-side fault indication display (VisiTrip) to indicate tripping due to overload or short circuit. Safe contact display (VisiSafe) of the circuit breaker, with a green display to ensure that there is no voltage on the output side. Technology of the trip unit - thermomagnetic. Can be combined with the residual current circuit breakers of the Acti 9 iID series, as well as the FI Block Vigi iC60. Additional auxiliary modules (optional) that can be added - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. Color RAL 9003. The iC60H circuit breaker meets the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. This series is also VDE certified!