Additional features
Network frequency	50/60 Hz
[Ue] Operational rated voltage	12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz
Magnetic trip threshold	8 x inch +/-20 %
Breaking capacity	36 kA Icu at 12 - 133 V AC 50/60 Hz conforms to EN/IEC 60947-2; 20 kA Icu at 220 - 240 V AC 50/60 Hz conforms to EN/IEC 60947-2; 10 kA Icu at 380 - 415 V AC 50/60 Hz conforms to EN/IEC 60947-2; 6 kA Icu at 440 V AC 50/60 Hz conforms to EN/IEC 60947-2; 6000 A Icn at 400 V AC 50/60 Hz conforms to EN/IEC 60898-1
Rated switching-off capacity Ics	27 kA 75 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7,5 kA 75 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 4,5 kA 75 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2
Limiting class	3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage	500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand	6 kV corresponds to EN/IEC 60947-2
Control type	Toggle switch
Local signalling	trip indicator
Mounting mode	Plug-on; Removable comb rail installed
Mounting bracket	35 mm DIN rail
Terminal pitch	18 mm between phases; 18 mm between phase and neutral
9-mm pitch	8
Height	91 mm
Width	72 mm
Depth	78,5 mm
Product weight	0,5 kg
Colour	White
Mechanical life	20000 cycles
Electrical lifetime	10000 cycles
Wire stripping length	14 mm for top or bottom connection
[M] tightening torque	3.5 Nm top or bottom
Earth fault protection	Separate block
Contact position indicator
Contractual warranty
Warranty (in months)	18
Main features
Product series	Acti9
Product name	Acti9 iC60
Product or component type	Miniature circuit breaker (MCB)
Device short name	iC60N
Device application	Distribution
Pole description	3P + N
Number of protected poles	3
Neutral position	Left
[In] Rated current	50 A
Type of network	AC; DC
Trigger technology	Thermal-magnetic
Cam disc	C
Product compatibility	Vigi iC60 double terminal add-on residual current device 63 A
Application category	Category A corresponds to EN/IEC 60947-2
Suitability for insulation	Yes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
Standards	EN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)	IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree	3 corresponds to EN/IEC 60947-2
Over voltage category	IV
Drip-proof	2 corresponds to IEC 60068-1
Relative humidity	95 % at 55 °C
Operating ambient temperature	-35…70 °C
Ambient temperature during storage	-40…85 °C
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	7,500 cm
VPE 1 width	7,200 cm
VPE 1 length	9,500 cm
Packaging weight (Lbs)	528,000 g
VPE 2 type	BB1
VPE 2 quantity	3
VPE 2 height	8,500 cm
VPE 2 width	9,800 cm
VPE 2 length	22,000 cm
VPE 2 weight	1,649 kg
VPE 3 type	S03
VPE 3 quantity	33
VPE 3 height	30,000 cm
VPE 3 width	30,000 cm
VPE 3 length	40,000 cm
VPE 3 weight	18,755 kg

Circuit breaker Acti 9 iC60N, 6kA (IEC/EN 60898-1), 10kA (IEC/EN 60947-2). 3-pole+N, nominal current 50A, C characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Double connection terminal for cable and pin comb bar on the top and bottom of the device. Snap action for low-wear switching of the contacts. Insulation cover that moves with the device. Operation of the top hat rail fastening element on the front of the device for tool-free installation and easy access for the user. With mechanical front-side fault indication display (VisiTrip) to indicate trips due to overload or short circuit. Safe contact display (VisiSafe) of the circuit breaker, with a green display it is certain that there is no voltage on the outgoing side. Terminals IP20, moving insulation cover. Double connection terminal from above or below. Easy removal of the individual device with an installed phase rail, thanks to the fastening element accessible from the front. Technology of the trip unit - thermomagnetic. Can be combined with the residual current circuit breakers of the Acti 9 iID series, as well as the FI Block Vigi iC60. Additional auxiliary modules that can be added in series (optional) - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. Color RAL 9003. The iC60N circuit breaker meets the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. This series is also VDE certified!