Schneider Electric A9F04340, EAN: 3606480440700

Schneider Electric A9F04340 circuit breaker 3p C 40A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9F04340 circuit breaker 3p C 40A

Lieske Part No. 317777
Mfg Part No A9F04340
EAN-Code 3606480440700
Manufacturer Schneider Electric
Here only 203,30 EUR
241,93 EUR incl. VAT

Further information for Schneider Electric A9F04340 circuit breaker 3p C 40A

Additional features
Network frequency50/60 Hz
[Ue] Operational rated voltage12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold8 x inch +/-20 %
Breaking capacity36 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 6 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at
Rated switching-off capacity Ics27 kA 75 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 4.5 kA 75 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at
Limiting class3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand6 kV corresponds to EN/IEC 60947-2
Control typeToggle switch
Local signallingtrip indicator
Mounting modePlug-on; Removable comb rail installed
Mounting bracket35 mm DIN rail
Terminal pitch18 mm between phases
9-mm pitch6
Height91 mm
Width54 mm
Depth78,5 mm
Product weight0,375 kg
ColourWhite
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Wire stripping length14 mm for top or bottom connection
[M] tightening torque3.5 Nm top or bottom
Earth fault protectionSeparate block
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iC60
Product or component typeMiniature circuit breaker (MCB)
Device short nameiC60N
Device applicationDistribution
Pole description3P
Number of protected poles3
[In] Rated current40 A
Type of networkAC; DC
Trigger technologyThermal-magnetic
Cam discC
Product compatibilityVigi iC60 double terminal add-on residual current device 63 A
Application categoryCategory A corresponds to EN/IEC 60947-2
Suitability for insulationYes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
StandardsEN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree3 corresponds to EN/IEC 60947-2
Over voltage categoryIV
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating ambient temperature-35…70 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height5,5 cm
VPE 1 width7,5 cm
VPE 1 length9,1 cm
Packaging weight (Lbs)371 g
VPE 2 typeBB1
VPE 2 quantity4
VPE 2 height8,5 cm
VPE 2 width9,8 cm
VPE 2 length22 cm
VPE 2 weight1,538 kg
VPE 3 typeS03
VPE 3 quantity44
VPE 3 height30 cm
VPE 3 width30 cm
VPE 3 length40 cm
VPE 3 weight17,4 kg
The circuit breaker A9F04340 from the Acti9 series by Schneider Electric is a 3-pole switch with a rated current of 40 A and C characteristic, specifically designed for distribution in electrical installations. It provides protection for wiring and devices against overload and short circuit. The tripping technology is based on thermomagnetic action, where the thermal component responds to sustained overload and the magnetic component ensures rapid disconnection in case of short circuit. The magnetic tripping threshold is set at 8 times the rated current, ensuring reliable response to high current surges.

Applications

The switch is designed for use in low-voltage installations, particularly in distribution enclosures and electrical distributions. It is suitable for operating voltages of 380–415 V AC, with a rated insulation voltage of 500 V AC. Conformity with standards EN/IEC 60947-2 and EN/IEC 60898-1 ensures compliance with international standards for power switches and circuit breakers. The usage category corresponds to Category A according to EN/IEC 60947-2, enabling use in installations with normal load characteristics.

Functions and Equipment in Detail

The switch features dual connection terminals at top and bottom, suitable for both cables and pin-type busbars. The terminal pitch is 18 mm, enabling compatible mounting in standard distribution enclosures. The contact position indicator (VisiSafe) shows green when the outgoing side is de-energized, enabling safe maintenance and inspection. The tripping indicator (VisiTrip) mechanically signals on the front when the switch has tripped due to overload or short circuit. The snap-action mechanism ensures wear-free switching of contacts, increasing service life.

Technology Explained Simply

The thermomagnetic tripping technology combines two principles: the thermal component responds to continuously elevated current values that persist over a longer period, tripping the switch after a certain time. The magnetic component reacts immediately to high current surges, such as those occurring during short circuits, and disconnects within milliseconds. The breaking class 3 according to EN/IEC 60898-1 indicates that the switch is capable of limiting the current during a short circuit to a certain level. The breaking capacity is 10 kA for 380–415 V AC, which is sufficient for typical industrial and commercial applications.

Compatibility and Accessories

The switch is compatible with residual current circuit breakers from the Acti9 iID series and residual current modules from the Vigi iC60 series. Additionally, auxiliary modules such as load current tripping units, under-voltage tripping units, over-voltage tripping units, or auxiliary contacts can be added. These modules extend functionality, such as for remote control, status indication, or integration into higher-level control systems. Mounting is done on a 35-mm DIN rail, with the mounting element operated from the front, enabling tool-free installation and easy removal.

Mounting and Installation

Mounting is performed on a standard 35-mm DIN rail. Front-side operation of the mounting element enables tool-free installation and simplifies removal of the device, especially when a phase bar is installed. The connection terminals are IP20-protected, ensuring protection against finger contact and solid foreign objects. The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles, ensuring high reliability throughout the entire service life.

Advantages in Operation

The switch offers high operational safety through the combination of thermal and magnetic tripping functions. The visual indicators (VisiTrip and VisiSafe) facilitate diagnosis and maintenance. Tool-free mounting and removal reduce installation effort. Compatibility with various accessory modules allows flexible adaptation to specific requirements. The operating temperature range is -35 °C to 70 °C, and the storage temperature range is -40 °C to 85 °C, making the switch suitable for a wide range of operating conditions. The color corresponds to RAL 9003 (white), enabling visual harmonization in distribution enclosures.

Protection Rating and Environmental Conditions

The protection rating is IP20, providing protection against finger contact and solid foreign objects. In a modular enclosure, the switch achieves IP40, offering additional protection against splashing water and dust. The pollution degree is 3, indicating an environment with increased pollution risk. The overvoltage category IV is intended for installations directly connected to the supply line. The drip-proof rating is 2, allowing limited exposure to dripping water. The relative humidity is up to 95 % at 55 °C, demonstrating high tolerance in humid environments.

Dimensions and Weight

The dimensions are 91 mm (height), 54 mm (width), and 78.5 mm (depth). The product weight is 0.375 kg. The tightening torque for the terminals is 3.5 Nm, with a wire stripping length of 14 mm. Mounting is on a 35-mm DIN rail, with the device arranged 6 times in a 9-mm pitch.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/317777
qrcode für Schneider Electric A9F04340 circuit breaker 3p C 40A