Further information for Schneider Electric A9F04332 Circuit Breaker 3p C 32A
Additional features
Network frequency
50/60 Hz
[Ue] Operational rated voltage
12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold
8 x inch +/-20 %
Breaking capacity
36 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 6 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at
Rated switching-off capacity Ics
27 kA 75 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 4.5 kA 75 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at
Limiting class
3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage
500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand
6 kV corresponds to EN/IEC 60947-2
Control type
Toggle switch
Local signalling
trip indicator
Mounting mode
Plug-on; Removable comb rail installed
Mounting bracket
35 mm DIN rail
Terminal pitch
18 mm between phases
9-mm pitch
6
Height
91 mm
Width
54 mm
Depth
78,5 mm
Product weight
0,375 kg
Colour
White
Mechanical life
20000 cycles
Electrical lifetime
10000 cycles
Wire stripping length
14 mm for top or bottom connection
[M] tightening torque
3.5 Nm top or bottom
Earth fault protection
Separate block
Contact position indicator
Contractual warranty
Warranty (in months)
18
Main features
Product series
Acti9
Product name
Acti9 iC60
Product or component type
Miniature circuit breaker (MCB)
Device short name
iC60N
Device application
Distribution
Pole description
3P
Number of protected poles
3
[In] Rated current
32 A
Type of network
DC; AC
Trigger technology
Thermal-magnetic
Cam disc
C
Product compatibility
Vigi iC60 double terminal add-on residual current device 63 A
Application category
Category A corresponds to EN/IEC 60947-2
Suitability for insulation
Yes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
Standards
EN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)
IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree
3 corresponds to EN/IEC 60947-2
Over voltage category
IV
Drip-proof
2 corresponds to IEC 60068-1
Relative humidity
95 % at 55 °C
Operating ambient temperature
-35…70 °C
Ambient temperature during storage
-40…85 °C
Packaging units
VPE 1 type
PCE
Number of devices per package
1
VPE 1 height
5,300 cm
VPE 1 width
7,300 cm
VPE 1 length
9,100 cm
Packaging weight (Lbs)
370,000 g
VPE 2 type
BB1
VPE 2 quantity
4
VPE 2 height
8,500 cm
VPE 2 width
9,800 cm
VPE 2 length
22,000 cm
VPE 2 weight
1,537 kg
VPE 3 type
S03
VPE 3 quantity
44
VPE 3 height
30 cm
VPE 3 width
30 cm
VPE 3 length
40 cm
VPE 3 weight
17,395 kg
The circuit breaker Acti9 iC60N from Schneider Electric is a 3-pole switch with a rated current of 32 A and a C-characteristic, specifically designed for distribution in electrical installations. It belongs to the Acti9 series and is intended for use in networks with an operating voltage of 380–415 V AC. The tripping technology is based on thermomechanical principles, with the magnetic tripping threshold set at 8 times the rated current, ensuring rapid response in the event of short circuits. The protection rating IP20 provides sufficient protection against contact and foreign objects, while in a modular housing with Class II insulation, a protection rating of IP40 is achieved. The operating temperature ranges from -35 °C to 70 °C, enabling use in various environments.
Applications
The switch is suitable for distribution in industrial and commercial installations, as well as in residential and office buildings. It protects electrical lines and devices against overload and short circuit. Compatibility with residual current circuit breakers of the Acti9 iID series and with the Vigi iC60 double terminal add-on residual current device 63 A expands application possibilities, particularly in installations requiring additional earth fault protection. Compliance with standards EN/IEC 60947-2 and EN/IEC 60898-1 ensures adherence to safety and functional requirements for switching devices in distribution systems.
Functions and Equipment in Detail
The switch features a double connection terminal at top and bottom, suitable for both cables and pin rail systems. The spring-loaded switching mechanism ensures wear-free contact switching, increasing service life. The moving insulation cover protects during installation and removal against unintended contact with live parts. The front-side actuation of the DIN rail mounting element enables tool-free mounting and simplifies handling. The mechanical fault indication (VisiTrip) indicates tripping due to overload or short circuit, while the safe contact indication (VisiSafe) signals de-energized condition on the output side when green.
Technology Explained Simply
The thermomechanical tripping technology combines a bimetal strip for overload protection with an electromagnetic tripping device for short circuits. The C-characteristic means the switch trips at 5 to 10 times the rated current, making it suitable for installations with high inrush currents. The breaking capacity is 10 kA Icu at 380–415 V AC, indicating the switch’s ability to safely interrupt short-circuit currents. The rated insulation voltage (Ui) of 500 V AC ensures electrical insulation even at higher voltages. The impulse voltage withstand (Uimp) of 6 kV protects against transient overvoltages.
Compatibility and Accessories
The switch is compatible with various accessory modules, including load current release (iMX), under-voltage release (iMNx), remote actuators (C70114), and auto-reclosing devices (C70134). These modules extend functionality, such as enabling remote control or automatic re-closing after a fault. Mounting is on a 35 mm DIN rail, with the device having a width of 54 mm and a height of 91 mm. The connection pitch is 18 mm between phases, and the terminals are designed for a wire stripping length of 14 mm. The tightening torque is 3.5 Nm.
Mounting and Installation
Mounting is tool-free via actuation of the DIN rail mounting element on the front side. Removal of the device is also easy even with an installed phase rail, as the mounting element is accessible from the front. The terminals are protected to IP20, ensuring protection against contact and foreign objects. The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles, guaranteeing high operational reliability and durability.
Advantages in Operation
The switch offers high operational reliability through the combination of thermal and magnetic tripping. Visual indicators (VisiTrip, VisiSafe) simplify maintenance and fault diagnosis. Tool-free mounting and easy removal reduce installation time. Compatibility with various accessory modules allows flexible adaptation to specific requirements. The device color is white (RAL 9003), enabling uniform visual design in distribution enclosures. Compliance with EN/IEC 60947-2 and EN/IEC 60898-1 standards, as well as VDE certification, ensures product quality and safety.