Schneider Electric A9F04325, EAN: 3606480440687

Schneider Electric A9F04325 Circuit Breaker 3p 25A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9F04325 Circuit Breaker 3p 25A

Lieske Part No. 578655
Mfg Part No A9F04325
EAN-Code 3606480440687
Manufacturer Schneider Electric
Here only 142,97 EUR
170,13 EUR incl. VAT

Further information for Schneider Electric A9F04325 Circuit Breaker 3p 25A

Additional features
Network frequency50/60 Hz
[Ue] Operational rated voltage12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold8 x inch +/-20 %
Breaking capacity36 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 6 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at
Rated switching-off capacity Ics27 kA 75 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 4.5 kA 75 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at
Limiting class3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand6 kV corresponds to EN/IEC 60947-2
Control typeToggle switch
Local signallingtrip indicator
Mounting modePlug-on; Removable comb rail installed
Mounting bracket35 mm DIN rail
Terminal pitch18 mm between phases
9-mm pitch6
Height91 mm
Width54 mm
Depth78,5 mm
Product weight0,375 kg
ColourWhite
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Connections - terminalsDouble terminal (top or bottom), for 1 cable(s), 1…25 mm², solid, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded with ferrule, copper; Double terminal (top or bottom), for 1.0 cable(s), stranded, copper or aluminium, with ring terminal and accessory
Wire stripping length14 mm for top or bottom connection
[M] tightening torque2 Nm top or bottom
Earth fault protectionSeparate block
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iC60
Product or component typeMiniature circuit breaker (MCB)
Device short nameiC60N
Device applicationDistribution
Pole description3P
Number of protected poles3
[In] Rated current25 A
Type of networkAC; DC
Trigger technologyThermal-magnetic
Cam discC
Product compatibilityVigi iC60 double terminal add-on residual current device 25/63 A
Application categoryCategory A corresponds to EN/IEC 60947-2
Suitability for insulationYes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
StandardsEN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree3 corresponds to EN/IEC 60947-2
Over voltage categoryIV
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating ambient temperature-35…70 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height5,300 cm
VPE 1 width7,400 cm
VPE 1 length9,100 cm
Packaging weight (Lbs)360,000 g
VPE 2 typeBB1
VPE 2 quantity4
VPE 2 height8,500 cm
VPE 2 width9,800 cm
VPE 2 length23,000 cm
VPE 2 weight1,530 kg
VPE 3 typeS03
VPE 3 quantity44
VPE 3 height30 cm
VPE 3 width30 cm
VPE 3 length40 cm
VPE 3 weight17,717 kg
The circuit breaker Acti9 iC60N from Schneider Electric is a 3-pole switch with a rated current of 25 A and a C characteristic, specifically designed for distribution in electrical installations. It belongs to the Acti9 series and is designed for use in networks with AC and DC voltage. The operating voltage is 380–415 V AC, with a rated insulation voltage of 500 V AC. The tripping technology is thermomagnetic, enabling a combination of thermal overload and magnetic short-circuit protection. The magnetic tripping threshold is at 8 times the rated current, with a tolerance of ±20 %, ensuring reliable response to sudden current surges.

Applications

The switch is suitable for use in industrial and commercial electrical installations as well as in residential buildings where safe and reliable power distribution is required. It complies with standards EN/IEC 60947-2 and EN/IEC 60898-1, with usage category A defined according to EN/IEC 60947-2. Suitability for insulation is confirmed, enabling use in installations with increased safety requirements. Overvoltage category IV and pollution degree 3 indicate robustness against environmental conditions.

Functions and Equipment in Detail

The switch features a contact position indicator (VisiSafe), which signals voltage-free condition on the outgoing side when green. A trip indicator (VisiTrip) provides visual notification of tripping due to overload or short circuit. Mounting is tool-free on a 35 mm DIN rail, with the mounting element operated from the front side. The double terminals at top and bottom allow flexible connection of cables with cross-sections of 1 to 25 mm² (solid copper), 1 to 16 mm² (flexible copper), or with wire end ferrules. The wire stripping length is 14 mm, and the tightening torque is 2 Nm. The terminals are protected to IP20, while the device achieves IP40 in a modular housing.

Technology Explained Simply

The snap-action switching ensures wear-free contact switching, increasing service life. The moving insulation cover protects against unintended contact with conductive parts during operation and installation. The mechanical life is 20000 cycles, and the electrical life is 10000 cycles. The breaking capacity varies by voltage range: 10 kA Icu at 380–415 V AC, 6 kA Icu at 440 V AC. The rated impulse voltage withstand is 6 kV. The operating temperature ranges from -35 °C to 70 °C, and the storage temperature ranges from -40 °C to 85 °C. The relative humidity is up to 95 % at 55 °C.

Compatibility and Accessories

The switch is compatible with the FI module Vigi iC60N/H 3p 25A 30mA Type A SI and other Vigi modules. Additional auxiliary modules such as under-voltage release, over-voltage release, load current release, or auxiliary switch can be mounted. Suitable accessories include remote control units (e.g. A9C70124, A9C70114), reclosing devices (A9C70134), phase bar modules (e.g. A9XAH357, A9XPH357), as well as filler and spacing pieces (A9A27062).

Mounting and Installation

Mounting is on a 35 mm DIN rail, with the device being removable for easy replacement. The connection pitch is 18 mm between phases, and the device is compatible with 9 mm pitch (6 modules). Dimensions are 91 mm (height), 54 mm (width), and 78.5 mm (depth). The product weight is 0.375 kg. The color is white, corresponding to RAL 9003.

Operational Advantages

The combination of tool-free mounting, visual indication, and high service life ensures easy maintenance and high operational safety. Integration into modular systems allows flexible expansion of protection functions. Compliance with standards EN/IEC 60947-2 and EN/IEC 60898-1, as well as VDE certification, guarantees conformity with European safety standards. The drip-proof rating (Class 2) and operating temperature ranges make the switch suitable for a wide range of operating conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/578655
qrcode für Schneider Electric A9F04325 Circuit Breaker 3p 25A