Schneider Electric A9F04320, EAN: 3606480440670

Schneider Electric A9F04320 Circuit Breaker 3p 20A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9F04320 Circuit Breaker 3p 20A

Lieske Part No. 336099
Mfg Part No A9F04320
EAN-Code 3606480440670
Manufacturer Schneider Electric
Here only 132,53 EUR
157,71 EUR incl. VAT

Further information for Schneider Electric A9F04320 Circuit Breaker 3p 20A

Additional features
Network frequency50/60 Hz
[Ue] Operational rated voltage12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold8 x inch +/-20 %
Breaking capacity36 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 6 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at
Rated switching-off capacity Ics27 kA 75 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 4.5 kA 75 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at
Limiting class3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand6 kV corresponds to EN/IEC 60947-2
Control typeToggle switch
Local signallingtrip indicator
Mounting modePlug-on; Removable comb rail installed
Mounting bracket35 mm DIN rail
Terminal pitch18 mm between phases
9-mm pitch6
Height91 mm
Width54 mm
Depth78,5 mm
Product weight0,375 kg
ColourWhite
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Connections - terminalsDouble terminal (top or bottom), for 1 cable(s), 1…25 mm², solid, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded with ferrule, copper; Double terminal (top or bottom), for 1.0 cable(s), stranded, copper or aluminium, with ring terminal and accessory
Wire stripping length14 mm for top or bottom connection
[M] tightening torque2 Nm top or bottom
Earth fault protectionSeparate block
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iC60
Product or component typeMiniature circuit breaker (MCB)
Device short nameiC60N
Device applicationDistribution
Pole description3P
Number of protected poles3
[In] Rated current20 A
Type of networkAC; DC
Trigger technologyThermal-magnetic
Cam discC
Product compatibilityVigi iC60 double terminal add-on residual current device 25/63 A
Application categoryCategory A corresponds to EN/IEC 60947-2
Suitability for insulationYes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
StandardsEN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree3 corresponds to EN/IEC 60947-2
Over voltage categoryIV
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating ambient temperature-35…70 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height7,300 cm
VPE 1 width5,300 cm
VPE 1 length8,700 cm
Packaging weight (Lbs)355,000 g
VPE 2 typeBB1
VPE 2 quantity4
VPE 2 height8,500 cm
VPE 2 width9,600 cm
VPE 2 length22,000 cm
VPE 2 weight1,472 kg
VPE 3 typeS03
VPE 3 quantity44
VPE 3 height30 cm
VPE 3 width30 cm
VPE 3 length40 cm
VPE 3 weight16,840 kg
The circuit breaker Acti9 iC60N from Schneider Electric is a 3-pole switch with a rated current of 20 A and a C characteristic, specifically designed for distribution in electrical installations. It belongs to the Acti9 series and is intended for use in networks with AC and DC voltage. The tripping technology is based on a thermomagnetic principle, which detects both thermal overloads and magnetic short-circuit currents and reacts accordingly. The protection function complies with the standards EN/IEC 60947-2 and EN/IEC 60898-1, with usage category A defined. The operating voltage is 380–415 V AC, the rated insulation voltage is 500 V AC, and the rated impulse withstand voltage is 6 kV. The magnetic tripping threshold is set at 8 times the rated current (±20 %).

Applications

The switch is suitable for use in industrial and commercial distribution systems, particularly in installations requiring high reliability and safety. It can be used in distribution enclosures, machine controls, or lighting systems. The protection rating IP20 at the terminals and IP40 in the modular housing (insulation class II) ensures sufficient protection against contact and contamination. The operating ambient temperature ranges from -35 °C to +70 °C, and the storage temperature ranges from -40 °C to +85 °C. The relative humidity is up to 95 % at 55 °C. The overvoltage category IV and pollution degree 3 meet the requirements for industrial applications.

Functions and Equipment in Detail

The switch features a double terminal at the top and bottom, suitable for connecting cables (1–25 mm² solid, 1–16 mm² flexible, also with wire end ferrules) as well as pin-and-finger busbars. The wire stripping length is 14 mm, and the tightening torque for the terminals is 2 Nm. The spring switching ensures wear-free switching of the contacts. A moving insulation cover protects against unintended contact during mounting and dismounting. The operation of the DIN rail mounting element is performed on the front of the device, enabling tool-free mounting and easy removal.

Technology Explained Simply

The thermomagnetic tripping technology combines a thermal and a magnetic tripping mechanism. The thermal part responds to prolonged overloads, while the magnetic part trips during sudden, high short-circuit currents. The C characteristic means that the switch trips at approximately 5 times the rated current after about 10 seconds, and at 10 times the current within 0.1 seconds. The contact position indicator (VisiSafe) shows green when the contacts are open and the outgoing side is de-energized. The trip indicator (VisiTrip) mechanically signals when the switch has tripped due to overload or short circuit.

Compatibility and Accessories

The switch is compatible with residual current circuit breakers from the Acti9 iID series as well as with the Vigi iC60 residual current module. It can be extended with various auxiliary modules, including overload tripping units, undervoltage tripping units, overvoltage tripping units, auxiliary switches, remote actuators, and reclosing devices. Mounting is done on a 35-mm DIN rail, with a connection pitch of 18 mm. The device height is 91 mm, width 54 mm, and depth 78.5 mm. The color is white, corresponding to RAL 9003.

Mounting and Installation

Mounting is tool-free on a 35-mm DIN rail. The front-accessible mounting enables easy installation and removal, even with a phase busbar installed. The terminals are designed for cable connections from the top or bottom. The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles.

Operational Advantages

The switch offers high operational safety thanks to the integrated contact and trip indicators. The tool-free mounting and easy removal simplify maintenance. The combinability with additional protection and control modules extends functionality. Compliance with EN/IEC 60947-2 and EN/IEC 60898-1 standards, as well as VDE certification, guarantees adherence to European safety standards. The breaking capacity is 10 kA at 380–415 V AC, which is sufficient for many industrial applications. The limiting class 3 meets the requirements for circuit breakers used at the distribution level.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/336099
qrcode für Schneider Electric A9F04320 Circuit Breaker 3p 20A