Further information for Schneider Electric A9F04102 Circuit Breaker 1p C 2A
Complementary
Network frequency
50/60 Hz
[Ue] rated operational voltage
12...60 V AC 50/60 Hz; 100...133 V AC 50/60 Hz; 220...240 V AC 50/60 Hz; 12...60 V DC; 60...72 V DC
Magnetic tripping limit
8 x In +/- 20 %
Breaking capacity
50 kA Icu at 12...60 V AC 50/60 Hz conforming to EN/IEC 60947-2; 50 kA Icu at 100...133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 50 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA Icu at 12...60 V DC conforming to EN/IEC 60947-2; 10 kA Icu at 60...72 V DC conforming to EN/IEC 60947-2; 6000 A Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60898-1
[Ics] rated service breaking capacity
50 kA 100 % x Icu at 12...60 V AC 50/60 Hz conforming to EN/IEC 60947-2; 50 kA 100 % x Icu at 100...133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 50 kA 100 % x Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 100 % x Icu at 12...60 V DC conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at 60...72 V DC conforming to EN/IEC 60947-2
Limitation class
3 conforming to EN/IEC 60898-1
[Ui] rated insulation voltage
500 V AC 50/60 Hz conforming to EN/IEC 60947-2
[Uimp] rated impulse withstand voltage
6 kV conforming to EN/IEC 60947-2
Control type
Toggle
Local signalling
Trip indicator
Mounting mode
Clip-on; Removable comb busbar installed
Mounting support
35 mm DIN rail
Connection pitch
18 mm between devices
9 mm pitches
2
Height
91 mm
Width
18 mm
Depth
78.5 mm
Net weight
0.125 kg
Colour
White
Mechanical durability
20000 cycles
Electrical durability
10000 cycles
Connections - terminals
Double terminal (top or bottom) , for 1 cable(s) , 1…25 mm², rigid, copper; Double terminal (top or bottom) , for 1 cable(s) , 1…16 mm², flexible, copper; Double terminal (top or bottom) , for 1 cable(s) , 1…16 mm², flexible with ferrule, copper; Double terminal (top or bottom) , for 1.0 cable(s) , flexible, copper or aluminium, with ring terminal and accessory
Wire stripping length
14 mm for top or bottom connection
Tightening torque
2 N.m top or bottom
Earth-leakage protection
Without
Contact position indicator
Contractual warranty
Warranty (in months)
18
Environment
IP degree of protection
IP20 conforming to IEC 60529; IP40 in modular enclosure (Insulation class II) conforming to IEC 60529
Pollution degree
3 conforming to EN/IEC 60947-2
Overvoltage category
IV
Tropicalisation
2 conforming to IEC 60068-1
Relative humidity
95 % at 55 °C
Ambient air temperature for operation
-35…70 °C
Ambient air temperature for storage
-40…85 °C
Logistical informations
Country of origin
BG
Main
Range
Acti9
Product name
Acti9 iC60
Product or component type
Miniature circuit-breaker
Device short name
IC60N
Device application
Distribution
Poles description
1P
Number of protected poles
1
[In] rated current
2 A
Network type
DC; AC
Trip unit technology
Thermal-magnetic
Curve code
C
Utilisation category
Category A conforming to EN/IEC 60947-2
Suitability for isolation
Yes conforming to EN/IEC 60898-1; Yes conforming to EN/IEC 60947-2
Standards
EN/IEC 60947-2; EN/IEC 60898-1
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
1.800 cm
Package 1 Width
7.400 cm
Package 1 Length
9.100 cm
Package 1 Weight
117.000 g
Unit Type of Package 2
BB1
Number of Units in Package 2
12
Package 2 Height
8.500 cm
Package 2 Width
9.800 cm
Package 2 Length
22.000 cm
Package 2 Weight
1.460 kg
Unit Type of Package 3
S03
Number of Units in Package 3
132
Package 3 Height
30 cm
Package 3 Width
30 cm
Package 3 Length
40 cm
Package 3 Weight
16.549 kg
The circuit breaker Acti9 iC60N from Schneider Electric is a 1-pole switch with a rated current of 2 A and a C characteristic, specifically designed for distribution in electrical installations. It belongs to the Acti9 series and is used in installation enclosures or distribution boxes to protect electrical circuits against overload and short-circuit. The tripping technology is thermal-magnetic, enabling the switch to trip due to thermal effects during overloads and magnetic effects during short-circuits. The magnetic tripping threshold is set at 8 times the rated current (±20 %), ensuring rapid response to high current surges.
Applications
The switch is designed for use in AC and DC networks. The operating voltage (Ue) covers multiple ranges: 12–60 V AC, 100–133 V AC, 220–240 V AC, as well as 12–60 V DC and 60–72 V DC. The rated insulation voltage (Ui) is 500 V AC, providing high electrical strength for use in industrial and commercial installations. The rated impulse voltage withstand (Uimp) is 6 kV, ensuring reliability during transient voltage surges. The application category corresponds to Category A according to EN/IEC 60947-2, indicating its use in distribution systems.
Functions and Equipment in Detail
The switch features a double terminal at the top and bottom, suitable for connecting rigid copper conductors (1–25 mm²), flexible copper conductors (1–16 mm²), or flexible conductors with wire end ferrules (1–16 mm²). When using flexible conductors with ring terminals, a cable cross-section of 1.0 mm² is possible. The wire stripping length is 14 mm, and the required tightening torque is 2 Nm. The terminals are equipped with a moving insulation cover, ensuring a secure and dust-free connection. The contact position indicator (VisiSafe) shows green when the outgoing side is de-energized, enabling safe maintenance. A local tripping indicator (VisiTrip) mechanically signals when the switch has tripped due to overload or short-circuit.
Technology Explained Simply
The snap-action switching ensures wear-free contact operation, increasing the service life. The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles. The limiting class 3 according to EN/IEC 60898-1 indicates that the switch is suitable for use in distribution systems with limited short-circuit current. The breaking capacity (Icu) is 50 kA at AC voltages of 12–240 V, 15 kA at 12–60 V DC, and 10 kA at 60–72 V DC. At 230 V AC, the breaking capacity (Icn) is 6000 A, highlighting its performance at nominal voltage.
Compatibility and Accessories
The switch is designed for mounting on a 35 mm DIN rail and can be installed either directly or with a removable comb rail. The connection pitch is 18 mm, and the switch occupies 2 pitches (9-mm pitch). It is compatible with residual current circuit breakers from the Acti9 iID series and the Vigi iC60 residual current module. Additionally, auxiliary modules such as load switches, undervoltage release, overvoltage release, auxiliary switches, or remote actuators can be integrated to extend functionality. The device color is white (RAL 9003).
Mounting and Installation
Mounting is tool-free, achieved by operating the DIN rail mounting element on the front of the device, enabling easy installation and removal. The protection rating is IP20 at the terminals and IP40 in the modular housing (Insulation Class II), providing protection against contact and contamination. The pollution degree is 3, the overvoltage category is IV, and the drip-proof rating is 2. The operating ambient temperature ranges from -35 °C to 70 °C, and the storage temperature ranges from -40 °C to 85 °C. The relative humidity is up to 95 % at 55 °C.
Operational Advantages
The switch offers high reliability through thermal-magnetic tripping technology and robust construction. Front-side operation and visual signaling (VisiTrip, VisiSafe) simplify maintenance and diagnostics. Compatibility with various auxiliary modules extends functionality for specific applications. Compliance with standards EN/IEC 60947-2 and EN/IEC 60898-1, along with VDE certification, ensures the safety and quality of the device. Dimensions are 91 mm (height), 18 mm (width), 78.5 mm (depth), and the product weight is 0.125 kg. Mounting on the DIN rail enables flexible and modular installation in distribution enclosures.
The Acti9 iC60N series is thus a powerful, safe, and maintenance-friendly circuit breaker for industrial, commercial, and residential applications, meeting requirements for safety, reliability, and flexibility.