Schneider Electric A9F03306, EAN: 3606480439896

Schneider Electric A9F03306 circuit breaker 3p B 6A

Installation > Modular devices / equipment installation > Circuit breaker

Schneider Electric A9F03306 circuit breaker 3p B 6A

Lieske Part No. 528402
Mfg Part No A9F03306
EAN-Code 3606480439896
Manufacturer Schneider Electric
Here only 96,42 EUR
114,74 EUR incl. VAT

Further information for Schneider Electric A9F03306 circuit breaker 3p B 6A

Additional features
Network frequency50/60 Hz
[Ue] Operational rated voltage12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold4 x inch +/-20 %
Breaking capacity36 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 6 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at
Rated switching-off capacity Ics27 kA 75 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 4.5 kA 75 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at
Limiting class3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand6 kV corresponds to EN/IEC 60947-2
Control typeToggle switch
Local signallingtrip indicator
Mounting modePlug-on; Removable comb rail installed
Mounting bracket35 mm DIN rail
Terminal pitch18 mm between phases
9-mm pitch6
Height91 mm
Width54 mm
Depth78,5 mm
Product weight0,375 kg
ColourWhite
Mechanical life20000 cycles
Electrical lifetime10000 cycles
Connections - terminalsDouble terminal (top or bottom), for 1 cable(s), 1…25 mm², solid, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded, copper; Double terminal (top or bottom), for 1 cable(s), 1…16 mm², stranded with ferrule, copper; Double terminal (top or bottom), for 1.0 cable(s), stranded, copper or aluminium, with ring terminal and accessory
Wire stripping length14 mm for top or bottom connection
[M] tightening torque2 Nm top or bottom
Earth fault protectionSeparate block
Contact position indicatorJa
Contractual warranty
Warranty (in months)18
Main features
Product seriesActi9
Product nameActi9 iC60
Product or component typeMiniature circuit breaker (MCB)
Device short nameiC60N
Device applicationDistribution
Pole description3P
Number of protected poles3
[In] Rated current6 A
Type of networkDC; AC
Trigger technologyThermal-magnetic
Cam discB
Product compatibilityVigi iC60 double terminal add-on residual current device 25/63 A
Application categoryCategory A corresponds to EN/IEC 60947-2
Suitability for insulationYes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
StandardsEN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree3 corresponds to EN/IEC 60947-2
Over voltage categoryIV
Drip-proof2 corresponds to IEC 60068-1
Relative humidity95 % at 55 °C
Operating ambient temperature-35…70 °C
Ambient temperature during storage-40…85 °C
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height5,5 cm
VPE 1 width7,5 cm
VPE 1 length9 cm
Packaging weight (Lbs)341 g
VPE 2 typeBB1
VPE 2 quantity4
VPE 2 height8,5 cm
VPE 2 width9,8 cm
VPE 2 length22 cm
VPE 2 weight1,41 kg
VPE 3 typeS03
VPE 3 quantity44
VPE 3 height30 cm
VPE 3 width30 cm
VPE 3 length40 cm
VPE 3 weight16,008 kg
The circuit breaker Acti9 iC60N from Schneider Electric is a 3-pole switch with a rated current of 6 A and a B characteristic, specifically designed for distribution in electrical installations. It belongs to the Acti9 series and is used in the iC60 product line. The tripping technology is based on thermal-magnetic principle, ensuring reliable detection and disconnection of overloads and short circuits. The magnetic tripping threshold is at 4 times the rated current, with a tolerance of ±20 %, enabling precise response to sudden current surges. The switch is designed for operating voltages of 380–415 V AC, with a rated insulation voltage of 500 V AC. The rated impulse withstand voltage is 6 kV, ensuring high safety against transient voltage spikes.

Applications

The switch is designed for use in distribution systems, particularly in industrial and commercial installations where reliable current protection is required. It is suitable for networks with a frequency of 50/60 Hz and complies with standards EN/IEC 60947-2 and EN/IEC 60898-1. The usage category is Category A, allowing application in installations with normal load characteristics. The protection rating IP20 provides protection against finger contact and solid foreign objects, while in a modular housing, a protection rating of IP40 is achieved. Pollution degree class 3 and overvoltage category IV indicate application in environments with increased pollution risk and transient voltage surges.

Functions and Equipment in Detail

The switch features a double connection terminal at top and bottom, suitable for both rigid cables (1–25 mm² copper) and flexible cables (1–16 mm² copper, with or without wire end ferrule). The cable stripping length is 14 mm, and the required tightening torque is 2 Nm. The snap-action switching ensures wear-free contact switching, increasing service life. The moving insulation cover ensures safe access to the terminals and prevents accidental contact. The contact position indicator (VisiSafe) shows green when the outgoing side is de-energized, providing additional safety during maintenance work. The trip indicator (VisiTrip) mechanically signals on the front side when the switch has tripped due to overload or short circuit.

Technology Explained Simply

The thermal-magnetic tripping technology combines a thermal and a magnetic tripping element. The thermal part reacts to sustained overloads by deforming a bimetal strip and disconnecting the contact. The magnetic part reacts immediately to high current surges such as short circuits by actuating the tripping mechanism via an electromagnet. The B characteristic means that the switch trips at approximately 1.3 times the rated current after about 1 hour, and at 5 times the rated current within 0.1 seconds. The limiting class 3 according to EN/IEC 60898-1 indicates that the switch limits energy release during short-circuit currents up to 10 kA (at 380–415 V AC). The breaking capacity is 10 kA Icu at 380–415 V AC, ensuring high safety with high short-circuit currents.

Compatibility and Accessories

The switch is compatible with the FI module Vigi iC60N/H 3p 25A 30mA Type A (part number A9W21325) and can be combined with FI protection switches from the Acti9 iID series. Various auxiliary modules can be mounted, including under-voltage release (e.g. A9A26969), load current release (e.g. A9A26946), auxiliary switches (e.g. A9A26915), remote actuators (e.g. A9C70124), and rotary actuators (e.g. A9A27006). Mounting is done on a 35 mm DIN rail, with the mounting bracket operated from the front, enabling tool-free mounting and easy removal. The connection pitch is 18 mm between phases, and the switch occupies 6 units in the 9 mm pitch.

Mounting and Installation

Mounting is done on a 35 mm DIN rail, with the mounting element operated from the front. This enables tool-free mounting and facilitates removal of the device, especially when phase rails are installed. Dimensions are 91 mm (height), 54 mm (width), and 78.5 mm (depth). The product weight is 0.375 kg. The ambient temperature during operation ranges from -35 °C to +70 °C, and during storage from -40 °C to +85 °C. The relative humidity is up to 95 % at 55 °C. Drip-proofing is specified as class 2 according to IEC 60068-1.

Operational Advantages

The switch offers high reliability through thermal-magnetic tripping technology and snap-action switching. The mechanical service life is 20,000 cycles, and the electrical service life is 10,000 cycles. The front-side indication of switching position and tripping facilitates maintenance and diagnosis. Compatibility with various accessory modules extends functionality without impairing basic function. The color is white (RAL 9003), enabling uniform visual design in distribution enclosures. Compliance with EN/IEC 60947-2 and EN/IEC 60898-1 standards, as well as VDE certification, guarantees adherence to European safety standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/528402
qrcode für Schneider Electric A9F03306 circuit breaker 3p B 6A