Further information for Schneider Electric A9F03232 circuit breaker 2-pole B 32A
Additional features
Network frequency
50/60 Hz
[Ue] Operational rated voltage
12 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz;
Magnetic trip threshold
4 x inch +/-20 %
Breaking capacity
36 kA Icu at 12 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 6 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at
Rated switching-off capacity Ics
27 kA 75 % x Icu at 12 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 4.5 kA 75 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at
Limiting class
3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage
500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand
6 kV corresponds to EN/IEC 60947-2
Control type
Toggle switch
Local signalling
trip indicator
Mounting mode
Plug-on; Removable comb rail installed
Mounting bracket
35 mm DIN rail
Terminal pitch
18 mm between phases
9-mm pitch
4
Height
91 mm
Width
36 mm
Depth
78,5 mm
Product weight
0,25 kg
Colour
White
Mechanical life
20000 cycles
Electrical lifetime
10000 cycles
Wire stripping length
14 mm for top or bottom connection
[M] tightening torque
3.5 Nm top or bottom
Earth fault protection
Separate block
Contact position indicator
Contractual warranty
Warranty (in months)
18
Main features
Product series
Acti9
Product name
Acti9 iC60
Product or component type
Miniature circuit breaker (MCB)
Device short name
iC60N
Device application
Distribution
Pole description
2P
Number of protected poles
2
[In] Rated current
32 A
Type of network
DC; AC
Trigger technology
Thermal-magnetic
Cam disc
B
Product compatibility
Vigi iC60 double terminal add-on residual current device 63 A
Application category
Category A corresponds to EN/IEC 60947-2
Suitability for insulation
Yes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
Standards
EN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)
IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree
3 corresponds to EN/IEC 60947-2
Over voltage category
IV
Drip-proof
2 corresponds to IEC 60068-1
Relative humidity
95 % at 55 °C
Operating ambient temperature
-35…70 °C
Ambient temperature during storage
-40…85 °C
Packaging units
VPE 1 type
PCE
Number of devices per package
1
VPE 1 height
3,500 cm
VPE 1 width
7,500 cm
VPE 1 length
9,000 cm
Packaging weight (Lbs)
248,000 g
VPE 2 type
BB1
VPE 2 quantity
6
VPE 2 height
8,000 cm
VPE 2 width
9,000 cm
VPE 2 length
22,500 cm
VPE 2 weight
1,541 kg
VPE 3 type
S03
VPE 3 quantity
66
VPE 3 height
30,000 cm
VPE 3 width
30,000 cm
VPE 3 length
40,000 cm
VPE 3 weight
17,370 kg
The Acti9 iC60N circuit breaker from Schneider Electric is a 2-pole switch with a rated current of 32 A, specifically designed for distribution in electrical installations. It belongs to the Acti9 series and features a thermomagnetic tripping technology that responds to both overloads and short circuits. The B characteristic ensures balanced protection suitable for typical consumer installations. The device is designed for operating voltages of 380 to 415 V AC and complies with standards EN/IEC 60947-2 and EN/IEC 60898-1, with an insulation voltage (Ui) of 500 V AC. The IP20 protection rating at the terminals ensures protection against contact with fingers and larger solid objects, while mounting is on a 35 mm DIN rail.
Applications
The iC60N is intended for use in indoor distribution switchgear, particularly in residential and commercial buildings. It is designed for protective functions in electrical installations where safe disconnection is required in case of overload or short circuit. The usage category A corresponds to EN/IEC 60947-2, indicating application in installations with lower risk of electrical disturbances. The operating ambient temperature ranges from -35 °C to 70 °C, enabling broad usability under various climatic conditions.
Functions and Equipment in Detail
The device features dual connection terminals at the top and bottom, suitable for both cables and pin-type busbars. The wire stripping length is 14 mm, and the tightening torque for the terminals is specified as 3.5 Nm. The snap-action switching ensures wear-resistant contact switching, increasing the device’s lifespan. An integrated insulating cover protects the terminals and prevents accidental contact. The DIN rail mounting element is operated from the front of the device, enabling tool-free installation and easy removal.
Technology Explained Simply
The thermomagnetic tripping technology combines a thermal and a magnetic tripping mechanism. The thermal component responds to slow overloads, while the magnetic component trips quickly in case of sudden short circuits. The magnetic tripping threshold is set at 4 times the rated current, with a tolerance of ±20 %. The breaking capacity varies depending on voltage: 10 kA at 380–415 V AC, which is sufficient for most distribution applications. The rated impulse withstand voltage is 6 kV, ensuring robustness against transient voltage surges.
Compatibility and Accessories
The iC60N is compatible with residual current circuit breakers from the Acti9 iID series, as well as with the Vigi iC60N/H 2p 63A 300mA Type A selective residual current module. Additionally, modular auxiliary components such as auxiliary contacts, motor start relays, undervoltage release units, or remote control actuators can be integrated. These modules extend the switch’s functionality, for example, for remote control or additional safety features. Mounting is on a 35 mm DIN rail, with a connection pitch of 18 mm, and the device can be mounted in 4 positions on a 9 mm grid.
Mounting and Installation
Mounting is on a 35 mm DIN rail, and the device can be clipped on without tools. Front-side operation of the mounting element allows for easy installation and removal, even with a phase busbar installed. The terminals are designed for connection from above or below, increasing installation flexibility. The mechanical life is 20000 cycles, and the electrical life is 10000 cycles, indicating high reliability.
Operational Advantages
The switch features a mechanical front-side fault indication (VisiTrip) that indicates tripping due to overload or short circuit. Additionally, a safe contact indication (VisiSafe) is integrated, which signals voltage-free conditions on the output side when green is displayed. These features enhance safety during maintenance and inspection work. The device color is white, matching RAL 9003, and the dimensions are 91 mm height, 36 mm width, and 78.5 mm depth. The product weight is 0.25 kg.
Protection Rating and Environmental Conditions
The IP20 protection rating at the terminals protects against contact with fingers and larger solid objects. In a modular enclosure, the device achieves IP40, providing protection against splashing water and dust. Pollution degree class 3 corresponds to EN/IEC 60947-2 and is suitable for environments with high pollution risk. Overvoltage category IV and drip-proof class 2 (equivalent to IEC 60068-1) ensure usability in various environments. The relative humidity can reach up to 95 % at 55 °C, enabling high tolerance to humid conditions.
Standards and Certification
The circuit breaker complies with standards EN/IEC 60947-2 and EN/IEC 60898-1. The limiting class 3 corresponds to EN/IEC 60898-1, describing the ability to limit short-circuit currents. The series is also VDE-certified, confirming compliance with German safety standards. The operating voltage (Ue) covers multiple ranges: 12–133 V AC, 220–240 V AC, 380–415 V AC, and 440 V AC, each at 50/60 Hz. The breaking capacity varies by voltage range, achieving 10 kA Icu at 380–415 V AC. The rated insulation voltage (Ui) is 500 V AC, and the rated impulse withstand voltage (Uimp) is 6 kV.