Further information for Schneider Electric A9F03132 Circuit Breaker 1p B 32A
Additional features
Network frequency
50/60 Hz
[Ue] Operational rated voltage
12 - 60 V AC 50/60 Hz; 100 - 133 V AC 50/60 Hz; 220 - 240 V AC 50/60 Hz; 12 - 60 V DC; 60 - 72 V DC
Magnetic trip threshold
4 x inch +/-20 %
Breaking capacity
36 kA Icu at 12 - 60 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 100 - 133 V AC 50/60 Hz complies with EN/IEC 60947-2; 10 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 15 kA Icu at 12 - 60 V DC complies with EN/IEC 60947-2; 10 kA Icu at 60 - 72 V DC complies with EN/IEC 60947-2; 6000 A Icn at 230 V AC 50/60 Hz complies with EN/IEC 60898-1
Rated switching-off capacity Ics
27 kA 75 % x Icu at 12 - 60 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 75 % x Icu at 100 - 133 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 75 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 15 kA 100 % x Icu at 12 - 60 V DC conforming to EN/IEC 60947-2; 10 kA 100 % x Icu at 60 - 72 V DC conforming to EN/IEC 60947-2
Limiting class
3 corresponds to EN/IEC 60898-1
[Ui] Rated insulation voltage
500 V AC 50/60 Hz corresponds to EN/IEC 60947-2
[Uimp] Rated impulse voltage withstand
6 kV corresponds to EN/IEC 60947-2
Control type
Toggle switch
Local signalling
trip indicator
Mounting mode
Plug-on; Removable comb rail installed
Mounting bracket
35 mm DIN rail
Terminal pitch
18 mm between devices
9-mm pitch
2
Height
91 mm
Width
18 mm
Depth
78,5 mm
Product weight
0,125 kg
Colour
White
Mechanical life
20000 cycles
Electrical lifetime
10000 cycles
Wire stripping length
14 mm for top or bottom connection
[M] tightening torque
3.5 Nm top or bottom
Earth fault protection
None
Contact position indicator
Contractual warranty
Warranty (in months)
18
Main features
Product series
Acti9
Product name
Acti9 iC60
Product or component type
Miniature circuit breaker (MCB)
Device short name
iC60N
Device application
Distribution
Pole description
1P
Number of protected poles
1
[In] Rated current
32 A
Type of network
DC; AC
Trigger technology
Thermal-magnetic
Cam disc
B
Application category
Category A corresponds to EN/IEC 60947-2
Suitability for insulation
Yes complies with EN/IEC 60898-1; Yes complies with EN/IEC 60947-2
Standards
EN/IEC 60947-2; EN/IEC 60898-1
Mounting
Degree of protection (IP)
IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529
Pollution degree
3 corresponds to EN/IEC 60947-2
Over voltage category
IV
Drip-proof
2 corresponds to IEC 60068-1
Relative humidity
95 % at 55 °C
Operating ambient temperature
-35…70 °C
Ambient temperature during storage
-40…85 °C
Packaging units
VPE 1 type
PCE
Number of devices per package
1
VPE 1 height
1,800 cm
VPE 1 width
7,400 cm
VPE 1 length
9,100 cm
Packaging weight (Lbs)
123,0 g
VPE 2 type
BB1
VPE 2 quantity
12
VPE 2 height
8,500 cm
VPE 2 width
9,800 cm
VPE 2 length
22,000 cm
VPE 2 weight
1,536 kg
VPE 3 type
S03
VPE 3 quantity
132
VPE 3 height
30 cm
VPE 3 width
30 cm
VPE 3 length
40 cm
VPE 3 weight
17,444 kg
The circuit breaker Acti9 iC60N from Schneider Electric is a 1-pole switch with a rated current of 32 A and a B characteristic, specifically designed for distribution in electrical installations. It belongs to the Acti9 series and is used as a circuit breaker in the field of installation technology. The tripping technology is based on a thermal-magnetic principle, which detects both thermal overload and magnetic short-circuit currents and reacts accordingly. The protection function is designed for networks with AC and DC voltage, with the operating voltage (Ue) ranging depending on the application between 12–60 V AC, 100–133 V AC, 220–240 V AC, as well as 12–60 V DC and 60–72 V DC. The rated insulation voltage (Ui) is 500 V AC, ensuring high electrical strength. The rated impulse withstand voltage (Uimp) is 6 kV, confirming suitability for environments with transient voltage surges.
Applications include protection functions in distribution enclosures, residential and commercial buildings, as well as industrial installations, where reliable protection of circuits against overload and short-circuit is required. The usage category corresponds to Category A according to EN/IEC 60947-2, enabling use in switching installations with normal load and low short-circuit risk. The switch is designed for an operating environment of -35 °C to 70 °C and can be operated at a relative humidity of up to 95 % at 55 °C. Storage is possible at -40 °C to 85 °C. The degree of protection is IP20, providing protection against contact with fingers and against solid foreign objects larger than 12.5 mm. In a modular housing (insulation class II), it achieves IP40, additionally protecting against splashing water from any direction.
Functions and equipment in detail include a double connection terminal at the top and bottom of the device, suitable for both cables and pin rail terminals. The connection pitch is 18 mm, allowing compact mounting on a 35 mm DIN rail. The wire stripping length is 14 mm, and the required tightening torque is 3.5 Nm. The contacts are operated via a spring mechanism, ensuring wear-resistant operation. A moving insulation cover provides additional safety during connection. The mechanical life is 20,000 cycles, and the electrical life is 10,000 cycles.
Technology explained simply shows that the switch features front-side operation of the DIN rail mounting element, enabling tool-free mounting and easy removal. Local signaling is provided by a trip indication (VisiTrip), visually indicating tripping due to overload or short-circuit. Additionally, a contact position indicator (VisiSafe) is integrated, with a green indicator showing voltage-free condition on the outgoing side. This function increases safety during maintenance work.
Compatibility and accessories include combinability with residual current circuit breakers from the Acti 9 iID series and the Vigi iC60 residual current module. Optional auxiliary modules such as current release, undervoltage release, overvoltage release, or remote switch can be connected. Mounting is done on a 35 mm DIN rail, with the device having a height of 91 mm, width of 18 mm, and depth of 78.5 mm. The product weight is 0.125 kg. The color is white (RAL 9003).
Mounting and installation is tool-free via operation of the mounting element on the front side. Removal of the device is also easy even with an installed phase rail. The terminals are protected to IP20, ensuring safe use in indoor environments. The pollution degree classification is 3, indicating an environment with heavy pollution. The overvoltage category is IV, confirming suitability for end devices near power supply units.
Operational advantages lie in high reliability, easy mounting and maintenance, and clear signaling of operating states. The thermal-magnetic tripping technology ensures precise response to different fault types. Combinability with additional modules extends the functionality of the switch in complex installations. Conformity with standards EN/IEC 60898-1 and EN/IEC 60947-2, as well as VDE certification, confirms the quality and safety of the product.